• The Quick Installation Guide (QIG) can be found where you find this guide or inside the package of the product. • Specifications can be found on the product page at https://www.tp-link.com. • Our Technical Support contact information can be found at the...
Chapter Get to Know About Your Adapter This chapter introduces what the adapter can do and shows its appearance. This chapter contains the following sections: • Product Overview • LED Status...
Get to Know about Your Adapter 1. 1. Product Overview The TP-Link Wireless PCI Express Adapter connects your desktop computer to a Wi-Fi network for lag-free video streaming, online gaming, secure internet surfing and internet calls. • Supports 802.11ac Wi-Fi standard •...
Chapter Connect to a Computer This chapter introduces how to install the adapter into your computer.
Page 7
Chapter 2 Connect to a Computer Follow the steps below to insert the adapter into your computer: 1. Turn off the computer, unplug the power cable and remove the case panel. 2. Locate an available PCI-E slot and carefully insert the adapter.
Page 8
Chapter 2 Connect to a Computer 3. Connect the antennas to the adapter. 4. Replace the case panel, plug in the power cable and turn on your computer. Note: If the bracket is not suitable for your computer, detach it from the adapter’s board and replace it with the low-profile bracket provided.
Chapter Use Your Adapter This chapter introduces how to install your adapter’s driver, use your adapter to join a wireless network, and uninstall the driver in a Windows system. The adapter is equipped with a setup wizard, which can guide you through the installation process. This chapter includes the following sections: •...
Follow the steps below to set up your adapter: 1. Insert the resource CD into your CD drive and run the Autorun.exe. Note: You can also download the driver from the product’s Support page at www.tp-link.com. 2. Select Archer T4E and follow the instructions to continue the installation.
Windows operating system: Windows 8/8.1/10, Windows XP/7. • Windows 8/8.1/10 Go to Start > Apps, find the TP-Link application. Click Uninstall TP-Link Archer T4E, then follow the on-screen instructions to complete the uninstallation. • Windows XP/7 Go to Start >...
1. On your computer, please right click Computer icon and go to Manage; 2. Open the Device Manager and go to Network adapters, and then find the corresponding TP-Link adapter, right click it and then go to Properties;...
Page 13
3. If you can see “This device is working properly.” in the red box, you have already installed the driver successfully. T3. What should I do if can’t connect to the Wi-Fi after installing the driver? • Refer to to check if you have installed the driver for your adapter successfully . •...
Page 14
There is a character string “Ver:X. Y ” (for example, Ver:2.0) in the Serial Number field, and the number X is the hardware version of the adapter. For more detailed instructions: • Can’t find the hardware version of the adapter: https://www.tp-link.com/faq-46.html • Can’t find or connect to the wireless networks: https://www.tp-link.com/faq-2253.html •...
Page 15
Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd.
Page 16
Product Name: Archer T4E Model Number: AC1200 Wireless Dual Band PCI Express Adapter Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com...
Page 17
20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. ” We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
5250MHz—5350MHz(20dBm) 5470MHz—5725MHz(20dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of...
Page 19
This radio transmitter (IC: 8853A-T4E/ Model: Archer T4E) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list below, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Page 20
les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Les produits utilisant la technique d’atténuation DFS (sélection dynamique des fréquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
Need help?
Do you have a question about the Archer T4E and is the answer not in the manual?
Questions and answers