AEG LFR73164OG User Manual
AEG LFR73164OG User Manual

AEG LFR73164OG User Manual

Advertisement

Quick Links

aeg.com/register
EN User Manual | Washing Machine
LFR73164OG
aeg.com\register

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LFR73164OG and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AEG LFR73164OG

  • Page 1 EN User Manual | Washing Machine LFR73164OG aeg.com\register...
  • Page 2: Table Of Contents

    FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 My AEG Care app ENGLISH...
  • Page 4: Safety Information

    SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 5: General Safety

    1.2 General Safety • This appliance is for washing domestic-type, machine- washable laundry only. • This appliance is designed for single household domestic use in an indoor environment. • This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
  • Page 6: Safety Instructions

    2. SAFETY INSTRUCTIONS 2.1 Installation • WARNING: This appliance is designed to be installed / connected to a grounding connection in the building. • Always use a correctly installed The installation must comply with shockproof socket. relevant national regulations. • Make sure that the parameters on the rating plate are compatible with the •...
  • Page 7: Product Description

    • Make sure that there is access to the tap elements, including heat pumps, piping after the installation. and related equipment including hoses, valves, filters and aquastops, printed 2.4 Use circuit boards, electronic displays, pressure switches, thermostats and sensors, software and firmware including WARNING! reset software, door, door hinge and Risk of injury, electric shock, fire, burns...
  • Page 8: Appliance Overview

    Ironing will be easier! duration in 30 seconds. The washing • The AEG Steam Fragrance, thanks to the programme is tailored to the laundry load steam programmes offers the perfect and the type of fabric without consuming...
  • Page 9: Technical Data

    The rating plate reports: QR code Mod. xxxxxxxxx model name Prod.No. 910000000 00 000V ~ 00Hz 0000 W product number 00000000 electrical ratings B C D serial number 4. TECHNICAL DATA Dimension Width/ Height/ Total depth 59.7 cm /84.7 cm /66.0 cm Electrical connection Voltage 230 V...
  • Page 10 3. Remove the internal film. 7. Remove the polystyrene protection from the bottom. 4. Open the door and remove the polystyrene piece from the door seal and 8. Pull up the appliance in vertical position. all the items from the drum. 5.
  • Page 11: Positioning And Levelling

    2. Loosen or tighten the feet to adjust the level. WARNING! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. 10. Remove the three bolts by using the spanner supplied with the appliance. The appliance must be level and stable.
  • Page 12: The Inlet Hose

    WARNING! If you install the appliance on a plinth that is The inlet water shall not exceed 25 °C. not an accessory supplied by AEG, secure the appliance with the fixing plates. This CAUTION! spare part is available in web shop or from authorised dealer.
  • Page 13: Electrical Connection

    It is possible to connect the drain hose in different ways: min.600 mm max.1000 mm • Connect the drain hose to the spigot and tighten it with a clamp. • Position the hose directly to a built-in drain The end of the drain hose must always pipe in the room wall and tighten it with a be ventilated , i.e.
  • Page 14: Control Panel

    Connect the appliance to an earthed The power supply cable must be easily socket. accessible after installing the appliance. For any electrical work required to install this appliance, contact our Authorised Service Centre. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution.
  • Page 15 Στύψιμο touch button Θερμοκρασία touch button 6.2 Display Door locked indicator. Washing phase indicator. It flashes during pre-wash and wash phase. Rinsing phase indicator. It flashes during rinse phase. Spinning and draining phase indicator. It flashes during spin and drain phase. Steam phase indicator.
  • Page 16: Dial And Buttons

    The digital indicator can show: • Programme duration (e. g. The time shown when the programme is set could not correspond to effective duration and change after ProSense phase. • Maximum load. • Finish in time (e. g. • Cycle end ( ). •...
  • Page 17: Programme Dial

    energy consumption in a few cases, you may The related led comes on and the related need to activate the appliance again. icon appears on display. For more details, refer to Stand-by paragraph in Daily Use chapter. If you set a programme via App and it 7.2 Programme dial does not match with the knob position, text appears alternating with...
  • Page 18 remains lit. The drum performs smooth 7.7 Έναρξη/Παύση movements for about 30 minutes to keep the steam benefit. Touch the Έναρξη/Παύση button to start, pause the appliance or interrupt a running To interrupt the anti-crease phase, you can: programme. • Press the On/Off button for a few seconds to activate or the deactivate the appliance.
  • Page 19 7.12 Λεκέδ/Πρόπλυση The display shows the indicator The drum turns regularly to reduce Press this button repeatedly to activate one of creasing. the two options. The door stays locked. The drum turns The relevant indicator goes on in the display. regularly to reduce creasing.
  • Page 20: Settings

    When the display shows the indicators , the appliance does not heat the water. 8. SETTINGS 8.1 Introduction The appliance will default to this option after you switch it off. 8.4 Operating Hours Counter When pressing a key combination, do It is possible to visualise the total operating not tilt your fingers downwards .
  • Page 21: Before First Use

    10.1 My AEG Care app and additional hidden programmes My AEG Care app provides you with a wide choice of additional hidden programmes. Connect the appliance to My AEG Care and you will be able to choose the programme that suits your needs most.
  • Page 22: Washing Programmes

    Washing programmes Programme Programme description Cotton and mixed synthetic fabrics. Ideal to wash your daily load in a short time, for a better clothes care and good cleaning already at 30°C. MixLoad 69min Low energy cycle for cottons. Decreases temperature and extends time to reach good washing results.
  • Page 23 Programme Programme description Σπόρ ρούχα Do not use fabric softener and make sure that there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner insulation. The recommended laundry load is 2.0 kg.
  • Page 24 Programme temperature, maximum spin speed and maximum load Programme Default tempera‐ Reference spin speed Maximum load ture Spin speed range Temperature range 30 °C 1600 rpm 5.0 kg 60 °C - 30 °C 1600 rpm - 400 rpm MixLoad 69min 1600 rpm 10.0 kg 40 °C...
  • Page 25 The Ατμός programmes do not remove particularly intense odour and do not perform any hygienic cycle. The fragrance is available on AEG web After the steam treatment the laundry can shop or by authorised dealer. be humid. Hang items out for a few minutes.
  • Page 26 10.5 Options compatibility with programmes Στύψιμο ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Rinse Hold ■ ■ ■ Extra Silent ■ No Spin ■ ■ ■ Λεκέδ ■ ■...
  • Page 27: Wi-Fi - Connectivity Setup

    Frequency 2.412 - 2.472 GHz for Eu‐ • Scan the QR code with the built-in camera ropean market app to download the My AEG Care application from the App store on your Protocol IEEE 802.11b/g/n smart device and follow the required Max Power <20 dBm...
  • Page 28 The access point will be open for about 3 3. Make sure you started a Wi-fi connection minutes. in the appliance. If not, read the next 5. Configure the My AEG Care app on your paragraph 'Configuring the appliance smart device and follow the instructions to wireless connection'.
  • Page 29: Over-The-Air Update

    Every time you switch the appliance on, the appliance takes about 10 seconds to connect to the network automatically. When the indicator stops blinking the connection is ready. To switch the wireless connection off, press and hold the Απομακρυσμένη εκκίνηση 2.
  • Page 30: Daily Use

    11.6 Wi-Fi Always On It is possible to turn the appliance on by pressing the On/Off button or through the The Wi-Fi Always On function is available in App. the App. This function keeps the appliance connected to the network even when the appliance is The Wi-Fi Always On function may affect turned off.
  • Page 31: Filling The Detergent And Additives

    12.3 Filling the detergent and 1. Open the detergent dispenser. additives 2. If a prewash phase is set, put the powder detergent in compartment 3. For main wash, chose the proper compartment depending on the type of - Compartment for detergent pods (Max 2 pods). When using detergent tablets, make sure that the detergent: Pods®...
  • Page 32: Starting A Programme

    In case a selection is not possible, no indicator comes on and an acoustic signal sounds. 12.5 Starting a programme Touch the Έναρξη/Παύση button to start the programme. The related indicator stops flashing and stays In the display, the indicator of the operating c) Put the tablets in the compartment phase starts flashing.
  • Page 33: Programme Phase Indicators

    After setting a washing programme, the icon lights up on the display if the The ProSense detection is carried out programme supports it. with complete washing programmes only (no skipping phase selected). After touching the Έναρξη/Παύση button, the ProSense starts the laundry load detection: 1.
  • Page 34: Cancelling A Running Programme

    12.10 Cancelling a running 12.12 End of the programme programme When the programme has finished, the appliance stops automatically. The acoustic 1. Press the On/Off button to cancel the signals operate (if they are active). programme and to deactivate the appliance.
  • Page 35: Stand-By Option

    Press the On/Off button to activate the • If you have set , the appliance appliance again. drains the water and spins. • After 5 minutes from the end of the • If you have set , the appliance only washing programme drains the water.
  • Page 36: Stubborn Stains

    – powder detergents (also tablets and single-dose detergents) for all types of fabric, excluding delicate. Prefer powder detergents containing bleach for whites and laundry sanitization, – liquid detergents (also single-dose detergents) , preferably for low temperature wash programmes (60 °C max) for all types of fabric, or special ones for woollens only.
  • Page 37: Care And Cleaning

    laundry can then be washed at a lower In areas where the water is soft it is not temperature. necessary to use a water softener. • Set the maximum possible spin speed To find out the water hardness in your area, for the selected washing programme contact your local water authority.
  • Page 38: Maintenance Wash

    14.4 Descaling If the water in your area is hard or medium hard, we recommend that you use a water softener for washing machines. Regularly examine the drum to check for limescale. Clean it when needed, using ammonia cream The regular detergents already contain water cleanser agent without scratching the seal softening agents, but we recommend to run a surface.
  • Page 39: Cleaning The Detergent Dispenser

    4. Add a manually small quantity of powder detergent or a specific product into the empty drum, in order to rinse out any left residues. Occasionally, at the end of a cycle the display may show the icon : this is a recommendation to perform the “drum cleaning”.
  • Page 40: Cleaning The Drain Pump

    CLICK 7. Make sure that all detergent residue is removed from the conveyor. Use only soft damp clothes. 8. Put bottom cover back to its position by 9. Reassembly the drawer as follows: aligning its holes on drawer hooks as a.
  • Page 41 • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows the alarm code WARNING! • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot.
  • Page 42: Cleaning The Inlet Hose And The Valve Filter

    14.10 Cleaning the inlet hose and the valve filter It is recommended to clean both the filters of the inlet hose and valve occasionally to remove any deposit, collected over the time: 1. Remove the inlet hose from the tap and clean the filter.
  • Page 43: Frost Precautions

    14.12 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket.
  • Page 44 With some problems, the display shows an alarm code and the Έναρξη/Παύση button may flash continuously: If the appliance is overloaded, remove some items from the drum and/or keep pressed the door while touching the Έναρξη/Παύση button until the indicator stops flashing (see the picture below).
  • Page 45 If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the appliance check the table below for possible solutions. Problem Possible solution • Make sure that the mains plug is connected to the mains socket.
  • Page 46 Problem Possible solution • Check the wireless signal. • Check if your smart device is connected to the wireless network. • Check your home network and router. • Restart the router. The App cannot connect to • Contact your wireless service provider if there are problems with the wireless the appliance.
  • Page 47: Emergency Door Opening

    15.2 Emergency door opening To open the door, proceed as follows: 1. Press the On/Off button to switch the In case of power failure or functioning failure appliance off. the appliance door remains locked. The 2. Disconnect the mains plug from the washing programme continues when the mains socket.
  • Page 48 16.2 Legend Laundry load. hh:mm Programme duration. Energy consumption. °C Temperature in the laundry. Litres Water consumption. Spin speed. Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g.
  • Page 49: Quick Guide

    Programme rpm 1) Litres hh:mm °C Βαμβακερά 10.0 2.900 90.0 04:05 44.00 85.0 1600 95°C Βαμβακερά 10.0 1.700 85.0 03:50 44.00 55.0 1600 60°C Βαμβακερά 10.0 0.350 85.0 03:00 44.00 20.0 1600 20°C Συνθετικά 0.800 55.0 02:15 35.00 40.0 1200 40°C Ευαίσθητα...
  • Page 50: Cleaning The Drain Pump Filter

    17.2 Cleaning the drain pump filter 180˚ Clean the filter regularly and, especially, if the alarm code appears on the display. 17.3 Programmes Programmes Load Product description Cotton and synthetic items. This programme ensures a good 5.0 kg washing performance in a short time. MixLoad 69min Low energy cycle for cottons.
  • Page 51: Environmental Concerns

    Programmes Load Product description To spin the laundry and to drain the water in the drum. All fab‐ 10.0 kg rics, except woollens and delicate fabrics. Στύψιμο/Αποστράγγιση Washing programme. Washing programme and waterproofing phase. Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas aeruginosa and MS2 Bacteriophage in external test performed by Swissatest Testmaterialien AG in 2021 (Test Report No.
  • Page 52 My AEG Care app The software in this product contains components that are based on free and open source software. AEG gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://aeg.opensoftwarerepository.com (folder NIUS)

Table of Contents