17. ENVIRONMENTAL CONCERNS..............46 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
1.2 General Safety This appliance is for washing domestic-type, machine- • washable laundry only. This appliance is designed for single household • domestic use in an indoor environment. This appliance may be used in, offices, hotel guest • rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
ENGLISH 2. SAFETY INSTRUCTIONS 2.1 Installation 2.2 Electrical connection The installation must comply WARNING! with relevant national Risk of fire and electric regulations. shock. • Remove all the packaging and the • WARNING: This appliance is transit bolts including rubber bush designed to be installed / connected with plastic spacer.
Page 6
• When unpacking the appliance, It is motor and drum, pumps, shock possible to see water flowing from the absorbers and springs, washing drum, drain hose. This is due to the testing drum spider and related ball bearings, of the appliance with the use of water heaters and heating elements, in the factory.
• The UniversalDose drawer with a creasing. Ironing will be easier! compartment dedicated to each type • The AEG Steam Fragrance, thanks of detergent, including a compartment to the steam programmes offers the for PODS®, equipped with a system...
Transit bolts Hose support The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D). Mod. xxxxxxxxx 910000000 00 Prod.No. 000V ~ 00Hz 0000 W 00000000 4. TECHNICAL DATA Dimension Width/ Height/ Total depth 59.7 cm /84.7 cm /66.0 cm...
Page 9
ENGLISH 7. Remove the polystyrene protection from the bottom. 3. Remove the internal film. 8. Pull up the appliance in vertical position. 4. Open the door and remove the polystyrene piece from the door seal and all the items from the drum. 9.
If you install the appliance on a plinth or equivalent materials that is not an accessory supplied by below the appliance feet to AEG, secure the appliance with the fixing adjust the level. plates. This spare part is available in web shop or from authorised dealer.
ENGLISH 5.4 The inlet hose 5.5 Water-stop device 1. Connect the water inlet hose to the The inlet hose has a water stop device. back of the appliance. This device prevents water leaks in the 2. Position it toward left or right hose because of its natural ageing.
Page 12
5. Without the plastic hose guide, to a sink spigot - Put the drain hose in the spigot and tighten it with a clamp. Refer to the illustration. Make sure that the drain hose end is not immersed in the water.
ENGLISH The power supply cable must be easily The manufacturer does not accept any accessible after installing the appliance. responsibility for damage or injury through failure to comply with the above For any electrical work required to install safety precaution. this appliance, contact our Authorised Service Centre.
Page 14
6.2 Display Door locked indicator. Washing phase indicator. It flashes during pre-wash and wash phase. Rinsing phase indicator. It flashes during rinse phase. Spinning and draining phase indicator. It flashes during spin and drain phase. Steam phase indicator. Anti-crease phase indicator.
ENGLISH The digital indicator can show: • Programme duration (e. g. The time shown when the programme is set could not correspond to effective duration and change af‐ ter ProSense phase. • Maximum load. • Finish in time (e. g. •...
7.3 Introduction 7.6 PODS® Touch this button to activate or The options/functions are deactivate the PODS® option . not selectable with all washing programmes. When activated the relevant indicator is Check the compatibility between options/functions Follow the Pods manufacturer's dosage and washing programmes in and storage recommendations.
ENGLISH 7.8 Extra Rinse This option is not available with a With this option you can add a few rinses temperature lower than to the selected washing programmes and 40 °C. optimise the fabric softener distribution • Prewash and improve the fabric softness. Use this option to add a pre-wash It is suggested when you use the fabric phase at 30 °C before the washing...
In some programmes the The appliance empties the rinses are performed with more water. water out automatically after The display shows the indicator approximately 18 hours. The door stays locked. The drum turns regularly to reduce creasing. 7.12 Temperature You must drain the water to unlock the door.
ENGLISH 8.5 Factory Defaults 1. Switch the appliance on by pressing the On/Off button. This function allows to restore the factory 2. Press and hold the default options. To activate this option buttons for some seconds. follow steps below: 3. After 3 seconds the total hours 1.
Page 20
Washing programmes Programme Programme description Cotton and mixed synthetic fabrics. Ideal to wash your daily load in a short time, for a better clothes care and good cleaning MixLoad 69min already at 30°C. Low energy cycle for cottons. Decreases temperature and ex‐...
Page 21
ENGLISH Programme Programme description Do not use fabric softener and make sure that Outdoor there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or in‐ ner insulation.
Page 22
Programme temperature, maximum spin speed and maximum load Programme Default tempera‐ Reference spin Maximum load ture speed Temperature Spin speed range range 30 °C 1400 rpm 5.0 kg 60 °C - 30 °C 1400 rpm - 400 rpm MixLoad 69min 1400 rpm 9.0 kg...
Page 23
• Items that are not suitable for tumble drying. The fragrance dose bottles • Items with label "Dry clean only". are available on AEG web shop or by authorised After the steam treatment dealer. the laundry can be humid.
Page 26
CAUTION! Washing heavily oiled, - Always follow the instructions that greasy stains could cause you find on the packaging of the detergent damage rubber parts of the products, but we recommend that you do washing machine. not exceed the maximum indicated level ).
ENGLISH declared load for the set programme (only for a few seconds), the default temperature, the default spin speed and the washing phase indicators (when available). 2. To change the temperature and/or the spin speed, touch the related buttons. 3. If desired, set one or more options by touching the related buttons.
To change or cancel this In case of in case of option: drum overload, the maximum declared load 1. Switch the appliance off by means of indicator comes on again the On/Off button. with the indicator 2. Switch the appliance on again.
ENGLISH When the phase ends the relevant If the ProSense phase is indicator stops flashing and is steady on. already carried out and the The next phase indicator starts flashing. water filling is already started, the new programme starts without repeating the E.g.
In the display all washing phase 2. Touch the Start / Pause button: indicators become steady and the time • If you have set , the appliance area shows . drains the water and spins. • If you have set...
ENGLISH 12. HINTS AND TIPS WARNING! Refer to Safety chapters. 12.1 The laundry load • Divide the laundry into: white, coloured, synthetics, delicates and wool. • Follow the washing instructions on the • Empty pockets and unfold the items. laundry care labels. •...
• Use only detergents and other • inadequate rinsing, treatments specially made for • a greater impact for the environment. washing machines. First, follow these 12.4 Ecological hints generic rules: – powder detergents (also tablets To save water, energy and to help...
ENGLISH 13.4 Descaling Maintenance wash Once a month If the water hardness in your Clean door seal Every two months area is high or moderate, we recommend that you use a Clean drum Every two months water descaling product for washing machines.
4. Add a manually small quantity of powder detergent or a specific product into the empty drum, in order to rinse out any left residues. Occasionally, at the end of a cycle the display may show the icon : this is a recommendation to perform the “drum cleaning”.
Page 35
ENGLISH 4. Wash the detergent dispenser and 7. Make sure that all detergent residue any insert under running water. is removed from the conveyor. Use only soft damp clothes. 8. Put bottom cover back to its position by aligning its holes on drawer hooks as indicated in the picture.
• The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows the alarm code CLICK WARNING! • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot.
ENGLISH 11. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages. 5. When the bowl is full of water, turn the filter back and empty the container.
1. Remove the inlet hose from the tap and clean the filter. 45° 20° 13.11 Emergency drain If the appliance cannot drain the water, carry out the same procedure, described 2.
ENGLISH 14. TROUBLESHOOTING WARNING! Refer to Safety chapters. 14.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the Start / Pause button may flash continuously:...
Page 40
• Make sure that the sink spigot is not clogged. • Make sure that the drain hose has no kinks or bends. The appliance does • Make sure that the drain filter is not clogged. Clean the filter, if not drain the water.
Page 41
ENGLISH Problem Possible solution • Set the spin programme. The spin phase does • Make sure that the drain filter is not clogged. Clean the filter, if not operate or the necessary. Refer to "Care and cleaning". washing cycle lasts •...
Problem Possible solution • Make sure you have used the detergent dispenser according the indications given in this user manual. After the washing cy‐ • Make sure to use fresh tablets or single-dose detergents. cle, there are some Store them in their box and close it after use, according to the detergent residues in manufacturer's recommendations.
ENGLISH 15. CONSUMPTION VALUES 15.1 Introduction See the web link www.theenergylabel.eu for detailed information about Energy Label. The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database.
Page 44
Eco 40-60 pro‐ Litres hh:mm °C gramme Quarter load 0.185 38.0 02:30 54.00 23.0 1351 1) Maximum spin speed. Power consumption in different modes Off (W) Stand-by (W) Delay start (W) 0.50 0.50 4.00 Time to Off/Standby mode is 15 minutes maximum.
ENGLISH 16. QUICK GUIDE 16.1 Daily use • Connect the mains plug to the mains • Pour the detergent and other socket. treatments in the proper compartment • Open the water tap. of the detergent dispenser. If you use tablets, please activate the Pods® •...
Programmes Load Product description Low energy cycle for cottons. Decreases tem‐ 9.0 kg perature and extends time to reach good Eco 40-60 washing results. White and coloured cotton fabrics. Ideal for 9.0 kg normal and heavy soil. Cottons 4.0 kg Synthetic items or mixed fabric items.
Need help?
Do you have a question about the LFR73944VE and is the answer not in the manual?
Questions and answers