Setting The Clock; Operating The Alarm; Adjusting The Display Backlight - Timex T228B User Manual

1. Press and hold the
Button. Be sure to set the correct AM/PM time, shown by the display's PM Indicator.
2. After setting the time, release the
Setting the Alarm
1. To set the wake time, press and hold the
Button and the
display's PM Indicator. Release the
2. To select the wake sound and activate the alarm, slide the
position. (See the Listening to the Radio section for instructions on setting the radio station and volume.)
The Alarm Indicator on the display will light.
NOTE: The buzzer alarm is a "Gentle Wake" alarm, meaning that the volume will rise as time passes.
Turning off the Alarm
1. When the alarm sounds, press the
same time on the following day. To turn the alarm off completely, slide the
"Off" position, so that the Alarm Indicator no longer appears on the display.
2. To activate the snooze feature, press the
minutes before sounding again. This can be repeated several times during the two-hour cycle.
3. If it is not turned off, the alarm will sound for an hour before stopping. As long as the Alarm Indicator
appears on the display, the alarm will sound at the set time.
This alarm clock radio features an adjustable display brightness, with dim and bright settings. To select a
•
setting, slide the

Setting the Clock

Time Set Button while pressing the
Time Set Button.

Operating the Alarm

Minute Set Button. Be sure to set the correct AM/PM wake time, shown by the
Alarm Set/Reset Button to turn the alarm off and reset it for the

Adjusting the Display Backlight

Dimmer Switch to the "Hi" or "Lo" position.
Alarm Set/Reset Button while pressing the
Alarm Set/Reset Button.
Function Switch to the "Radio" or "Buzzer"
Snooze/Sleep Off Button. The alarm will shut off for nine
5
Hour Set Button and the
Function Switch to the
Minute Set
Hour Set