Setting The Clock Time And Calendar - Timex T300 Manual

Setting the Clock Time and Calendar
Important
- While setting the Time or Calendar, if you do not press the ©
Hr./Mon
or ©
Min/Date Buttons
within
approximately 10 seconds, the display will stop flashing. If this happens you must press the ©
Time/
Cal. Button
Once to enter the clock setting mode and Twice to enter the calendar setting mode.
1. Press the ©
Time/Cal. Button Once.
The clock digits begin to flash.
2. Press the ©
Hr./Mon. Button
to set the correct hour. Make sure you set the correct AM or PM. The
PM
Indicator
is located on the left side of the display.
3. Press the ©
Min./Date Button
to set the correct time.
4.
Press the ©
Time/Cal. Button.
The date will begin to flash.
5. Press the ©
Hr./Mon. Button
to set the correct month.
6
. Press the ©
Min./Date Button
to set the correct date.
7. After the correct time and date are displayed, press the ©
Time/Cal. Button
Once to exit the setting mode.
10