LiFePO4 Battery 1.Overview 1.1 Scope This user manual provides information, instructions and maintenance guidelines for the low-voltage household energy storage battery series. The Residential energy storage series is a lithium battery system developed to be compatible with various inverter brands on the market. 1.2 Intended Audience This manual is intended for professional technical personnel involved in the installa- tion,operation, and maintenance of lithium batteries, as well as end-users seeking...
3.Warning Symbols To ensure user safety during product use, relevant labeling information with appropriate symbols is provided in this manual. The following lists symbols that may be used in this manual, so please read carefully. Description Icon Signies a low-level potential hazard. Failure to avoid may result in minor or moderate injury to personnel.
4.5 Power-On Measurement Danger After the energy storage battery is installed, there is a high voltage present, and acci- dental contact with the positive and negative terminals may result in electric shock injuries. Therefore, when conducting power-on measurements, attention should be paid to the following: 1.Take necessary insulation protection measures (such as wearing insulated gloves).
5.Overviewof Main Components 5.1 Product Conguration List Image Name Battery The product conguration list is subject to change without prior notice. 6.Product Details 6.1 Product Parameter The technical parameters of LiFePO4 Battery Energy Storage System are shown in Table 1 below: ltems 12.8V 100Ah 12.8V 300Ah...
7.Product Installation 7.1 Preparations 1.There is a standard site for installing battery modules. 2.Check whether the battery module is installed rmly and correctly. 3.Considering the load capacity, carefully set the total installation capacity of the installation site. *Installation Suggestions: When placing battery modules on the shelf it is recommended to use an elevator for safety.
7.3 Visual Inspection ltems Verication Method Correct Position of All Screw Power Port Visual checking Label (position, direction, serial) No physical damage 8.Usage 8.1 Charging Instructions 1.When charging the battery string, conrm the positive and negative polarities. Do not connect the positive and negative polarities to the opposite side. 2.Set the battery charging current on the rectier to prevent overload protection of the rectier due to high battery charging current.
9.Matters needing attention 1.The battery pack must be maintained by professional personnel, non-professional personnel are strictly prohibited to dismantle, To avoid danger, do not wear or damage the battery string cable during operation or maintenance. 2.Before using the battery module, ensure that the positive and negative terminals are correctly connected and reliably connected.
Need help?
Do you have a question about the POW-100AH-12.8V-T and is the answer not in the manual?
Questions and answers