Advertisement
Quick Links
PROGRAMMABLE UNIVERSAL
COMMERCIAL VEHICLE TPMS
SENSOR
MX-Sensor CVS-A01
With Metal Band for Rim Size of: 14''-24.5''
PATENT
This product is protected by patents in the U.S. and elsewhere. For
more information, please visit https://autel.us/virtual-patents/.
CAUTION
Autel MX-Sensor CVS-A01 arrives blank and must be programmed
•
with an Autel CV TPMS tool. We recommend you program the CV
sensor prior to installation.
•
Do not race a vehicle on which the MX-Sensor CVS-A01 with a
metal band is installed, and always keep the drive speed under 240
km/h (150 mph).
SAFETY INSTRUCTIONS
Before installing the CV sensor, read the installation and safety
instructions carefully. For reasons of safety and for optimal
operation, we recommend that any maintenance and repair work be
carried out by trained experts only, in accordance with the
guidelines of the vehicle manufacturer. The metal bands are meant
to provide safety and are intended for professional installation only.
Failure to heed these warnings may result in the failure of the CV
TPMS sensor. AUTEL does not assume any liability in case of faulty
or incorrect installation of the product.
CAUTION
• The CV TPMS sensor assemblies are replacement or maintenance
parts for vehicles with factory-installed TPMS.
• Make sure to program the sensors using AUTEL TPMS program-
ming tools for the specific vehicle make, model, and year before
installation.
• Do not install programmed CV TPMS sensors in damaged wheels.
• In order to guarantee optimal functionality, the sensors can only be
installed with original bands and accessories provided by AUTEL.
• Upon completing the installation, test the vehicle's TPMS following
the procedures described in the original manufacturer's user guide
to confirm proper installation.
We b : w ww.au t el . com
www .m axi t p m s. com
CUSTOMER & TECH SUPPORT
Technical Specifications
WARRANTY
AUTEL guarantees that the sensor is free from material and
manufacturing defects for twenty-four (24) months or for 62,100
miles (100,000 km), whichever comes first. AUTEL will, at its
discretion, replace any merchandise during the warranty period.
The warranty shall be void if any of the following occurs:
1. Improper installation of products
2. Improper usage
3. Induction of defect by other products
4. Mishandling of products
5. Incorrect application
6. Damage due to collision or tire failure
7. Damage due to racing or competition
8. Exceeding specific limits of the product
1-855-288-3587 (US)
+49(0)89 540299608 (EU)
+86 (0755) 8614-7779 (CN)
sales@autel.com | supporttpms@auteltech.com
www.autel.com | www.maxitpms.com
Sensor Body
Guide Blade Bracket
Mounting Bracket
Weight (sensor body only)
Dimensions
Max. pressure range (relative)
CAUTION:
• When mounting the sensor onto the wheel rim, make sure the
arrow on the sensor surface points to the valve.
• If the initial purchase included a fabric band and you wish to
switch to a metal band, please adhere to the following installation
steps.
• Each time a tire is serviced or dismounted, or if the sensor is
removed or replaced, it is suggested to replace the band,
mounting brackets, and guide blade bracket.
• Both fabric bands and metal bands can be purchased
separately.
26.3 g
59.5 x 29.4 x 22.8 mm
1400 kPa
Advertisement
Related Manuals for Autel CVS-A01
Summary of Contents for Autel CVS-A01
- Page 1 Autel CV TPMS tool. We recommend you program the CV sensor prior to installation. • Do not race a vehicle on which the MX-Sensor CVS-A01 with a metal band is installed, and always keep the drive speed under 240 km/h (150 mph).
- Page 2 When using a tire machine, refer to the instructions from both the manufac- turer and Autel to dismount the tire from the rim. 2.2 When using a horizontal tire machine to dismount the light commercial 2.1 When using a vertical tire machine to dismount the commercial...
- Page 3 CAUTION: When using a tire machine to mount the tire onto If it is an Autel MX-sensor with a metal band, use a TX30 torque the rim, refer to the instructions from both the manufacturer wrench to loosen the screw on the metal band. Then, remove the and Autel.
-
Page 4: Battery Warning
Notice: Dual wheels must be installed on the vehicle with the valves directly opposite each other or as close to 180º apart as possible to accurately program or activate the inside and outside sensors and prevent interference between the two sensors (Fig.13). -
Page 5: Warranty
Autel MX-Sensor CVS-A01 arrives blank and must be programmed with an Autel CV TPMS tool. We recommend you program the CV Technical Specifications sensor prior to installation. Do not race a vehicle on which the MX-Sensor CVS-A01 with a • Weight (sensor body only) 26.3 g... - Page 6 If it is an Autel MX-sensor with a fabric band, unthread the Velcro, remove the band, and extract the sensor from the band pocket. Step 3: Adjust the bead loosener disk to position it behind the tire bead (Fig.4).
- Page 7 CAUTION: When using a tire machine to mount the tire onto the rim, refer to the instructions from both the manufacturer and Autel. 5.1 When using a vertical tire machine to mount the commercial tire Step 1: Place the rim onto a vertical tire machine with the rim flange clamp at the 12 o'clock position, the sensor at the 2 o'clock position, and the mounting hook at the 8 o'clock position (Fig.11).
- Page 8 Notice: Dual wheels must be installed on the vehicle with the valves directly opposite each other or as close to 180º apart as possible to accurately program or activate the inside and outside sensors and prevent interference between the two sensors (Fig.13).
Need help?
Do you have a question about the CVS-A01 and is the answer not in the manual?
Questions and answers