Advertisement
Quick Links
Version 04/2025
Latest version available at:
www.finsterwalder-charly.de
Instruction Manual
Paralock 3
with upgrade
HKar130
Lever bearing
Spring cover
Release lever
Line guards
Release knob
Harness strap chamber
Operating limits: Breaking load = 2,800 daN | WLL = 120 daN | Replacement interval from commissioning = 8 years mono, 5 years tandem
This instruction manual refers to the Paralock retrofitted with line guards.
Operation of the Paralock 3 without the upgrade is no longer permitted.
When using the Paralock on a paraglider with a speed system, it is strongly recommended to install a system that automatically disconnects
the speed system when the Paralock is released. Suitable separation systems are available from the FINSTERWALDER & CHARLY webshop.
Lock
Locking joint axle
Blue Disc
(available as accessory)
Securing pin
Knob bolt
Ramp for
knob bolt
*1 daN corresponds to ~1 kg
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Finsterwalder Paralock 3
Summary of Contents for Finsterwalder Paralock 3
- Page 1 When using the Paralock on a paraglider with a speed system, it is strongly recommended to install a system that automatically disconnects the speed system when the Paralock is released. Suitable separation systems are available from the FINSTERWALDER & CHARLY webshop.
- Page 2 3. If the securing pin has been completely removed, ensure that the side with the two grooves is care and maintenance. The Paralock 3 is not approved for commercial tandem use until further inserted first. If necessary, the optional Blue Disc can be screwed on in the blocked position close notice.
- Page 3 4. The knob bolt can now be removed from the swivel lever. 5. To reinstall, put the release button back on and push the knob bolt in flush with the release Finsterwalder GmbH button. 6. Screw in the Phillips head screw carefully to avoid damaging the thread in the plastic.
Need help?
Do you have a question about the Paralock 3 and is the answer not in the manual?
Questions and answers