Advertisement
Quick Links
Version 11/2024
Latest version available at:
www.finsterwalder-charly.de
Instruction Manual
Paralock 3
Paragliding Carabiner
HKar130
Lever bearing
Spring cover
Release lever
Release knob
Harness strap chamber
Breaking load: 2,800 daN (1 daN corresponds to approx. 1 kg)
Replacement interval from commissioning: 8 years mono, 5 years tandem
When using the Paralock on a paraglider with a speed system, it is strongly recommended to install a system that automatically disconnects
the speed system when the Paralock is released. Suitable separation systems are available from the FINSTERWALDER & CHARLY webshop.
Locking joint axle
Lock
Securing pin
Operating limitations
Working load limit: 120 daN
Knob bolt
Ramp for
knob bolt
Advertisement
Related Manuals for Finsterwalder CHARLY Paralock 3
Summary of Contents for Finsterwalder CHARLY Paralock 3
- Page 1 When using the Paralock on a paraglider with a speed system, it is strongly recommended to install a system that automatically disconnects the speed system when the Paralock is released. Suitable separation systems are available from the FINSTERWALDER & CHARLY webshop.
- Page 2 Such wear will not occur if the Paralock is activated after an is additionally blocked with the securing pin. Instruction manual | FINSTERWALDER Paralock 3 Paragliding Carabiner | Version 11/2024 Instruction manual | FINSTERWALDER Paralock 3 Paragliding Carabiner | Version 11/2024...
- Page 3 2. Carefully unlock the release lever and turn it out. 3. Hold the knob and eject it by turning the release button. Caution: Carefully tighten the Phillips screw during assembly to avoid damaging the thread in Finsterwalder GmbH the plastic. Charly Produkte Fig. 4 Dismounting the lock Push out the locking joint axle, taking care not to lose the ball inside the joint.
Need help?
Do you have a question about the CHARLY Paralock 3 and is the answer not in the manual?
Questions and answers