Page 3
VERS. 2023.06.13 ISC_MAN_EN Declaration of conformity The undersigned manufacturer: SAINT - GOBAIN ABRASIVES S.A. 190, BD J.F. KENNEDY L- 4930 BASCHARAGE Declares that this product: ISC 3.75.3 400V 70184613986 Masonry Saws: Code: is in conformity with the following Directives: "MACHINES" 2006/42/CE ...
Page 4
VERS. 2023.06.13 ISC_MAN_EN Declaration of conformity The undersigned manufacturer: SAINT - GOBAIN ABRASIVES S.A. 190, BD J.F. KENNEDY L- 4930 BASCHARAGE Declares that this product: ISC 3.75.3 400V 70184613986 Masonry Saw: Code: is in conformity with the following standard: Supply of Machinery (Safety) Regulations 2008 ...
VERS. 2023.06.13 ISC_MAN_EN 1 BASIC SAFETY INSTRUCTIONS The ISC is exclusively designed for the cutting of construction products mainly on construction sites. Uses other than the manufacturer's instructions shall be considered as contravening the regulations. The manufacturer shall not be held responsible for any resulting damage. Any risk shall be borne entirely by the user.
Always cut with the blade guard in position. Only fit NORTON diamond blades to the machine! The use of other tools can damage the machine! Read the blades’ specifications carefully to choose the correct tool for your application.
Page 8
VERS. 2023.06.13 ISC_MAN_EN Electrical powered machine Always turn off the machine and separate it from the main source of electricity before any work on the machine is done. You can lock the ON-OFF-switch using a padlock. Make all electrical connections securely to eliminate contact of live wires with spray water or dampness ...
As with all other NORTON products, the operator will immediately appreciate the attention given to detail and quality of materials used in construction. The machine and its component parts are assembled to high standards assuring long life and minimum maintenance.
Page 10
VERS. 2023.06.13 ISC_MAN_EN Frame (1) Jig-welded, reinforced and all-steel construction ensures perfect rigidity. The frame includes a large capacity water tray (3) with drain plug. Frame has four built-in lift brackets (2) for easy transportation. Cutting head (4) Jig-welded steel console equipped with pivot bar fixed to frame upright and housed in heavy-duty bearings.
VERS. 2023.06.13 ISC_MAN_EN 2.4 Technical Data Electric motor 5,5 kW, 400V, 3-Phase 50Hz 1438 min Electric motor protection IP54 Star-triangle switch with thermal overload Switch protection, no volt release and emergency stop Max. blade diameter 500 mm Bore 25,4 mm Cutting length mm 750 mm Cutting depth mm...
VERS. 2023.06.13 ISC_MAN_EN 2.5 Statement regarding the vibration emission Declared value of vibration emission following EN 12096. Machine Measured value of vibration Uncertainty K Tool used Model / code emission at m/s Model / code ISC 3.75.3 Clipper ZDH 500 <2.5 400V Diamond blade...
VERS. 2023.06.13 ISC_MAN_EN 2.6 Statement regarding noise emission Declared value of noise emission following EN ISO 11201 and NF EN ISO 3744. Machine Sound Uncertainty K Sound power Uncertainty K Model / code Pressure level (Sound level (Sound power level Pressure level EN ISO 11201 NF EN ISO 3744...
Before using the machine for the first time, please remove this plate. 3.1 Tool assembly Only NORTON blades with a maximum diameter of 500 mm can be used with the ISC. All tools used must be selected with regard to their maximum permitted cutting speed for the machine’s maximum permitted rotation speed.
VERS. 2023.06.13 ISC_MAN_EN 3.3 Water cooling system and conveyor cart Your machine is supplied without conveyor cart. In order to use your machine, you must order either a flat table (code 00310004704), or a tilting cart (code 00310004702). As many refractory materials are sensitive to water, your machine is also supplied without water pump. You can order a complete water supply system (00310004732).
Page 16
VERS. 2023.06.13 ISC_MAN_EN Put material on conveyor cart and place it securely against the material stop (and possibly the guide-a-cut). Pull the conveyor cart slowly and without undue pressure towards the rotating blade and cut the material. NOTE: While recommended, it is not absolutely necessary to lock the cutting head into a given depth position when jam cutting.
VERS. 2023.06.13 ISC_MAN_EN 5 TRANSPORT AND STORING Take the following measures in order to transport the ISC securely. 5.1 Securing for transport Before transporting or lifting the machine, always remove the blade and the conveyor cart and empty the water pan. 5.2 Transport procedure Only use the lift brackets to lift the machine or to transport it using a fork-lift truck, as other parts of the machine are not designed for this purpose.
VERS. 2023.06.13 ISC_MAN_EN 6 MAINTENANCE AND SERVICING To ensure a long-term quality from the cutting with the ISC, please follow the maintenance plan below: Whole machine Visual control (general aspect, watertightness) Clean Flange and blade fixing devices Clean Motor cooling fans Clean Belts tension Check tension and adjust...
VERS. 2023.06.13 ISC_MAN_EN 7 FAULTS: CAUSES AND CURES Fault-finding procedures Should any fault occur during the use of the machine, turn it off, and isolate it from the electrical supply. Any works dealing with the electrical system or supply of the machine can only be carried out by a qualified electrician.
Spare parts for the motor can be ordered with the manufacturer of the motor or with their dealer, which is often quicker and cheaper. This machine has been manufactured by: Saint-Gobain Abrasives S.A. 190, Bd. J. F. Kennedy L- 4930 BASCHARAGE Grand-duché de Luxembourg. Tel.: 00352-50 401-1 Fax: 00352- 50 16 33 http://www.construction.norton.eu e-mail: sales.nlx@saint-gobain.com...
VERS. 2023.06.13 ISC_MAN_EN 7.2 Spare parts In order to consult the spare parts lists, we invite you to visit the after-sales website of Norton Clipper by using the following address: https://spareparts.nortonabrasives.com For a quick access, you can also use the QR Code shown below using your mobile phone: This electronic catalogue provides exploded views and spare parts lists for different machines designed by Norton Clipper so you can find references you need.
Need help?
Do you have a question about the clipper ISC 3.75.3 and is the answer not in the manual?
Questions and answers