Norton clipper TR 200 E Operating Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

TR 200 E

OPERATING INSTRUCTIONS

Table of Contents

Need help?

Do you have a question about the clipper TR 200 E and is the answer not in the manual?

Questions and answers

Summary of Contents for Norton clipper TR 200 E

Page 1 TR 200 E OPERATING INSTRUCTIONS...
Page 3 Déclaration de conformité The undersigned manufacturer: SAINT - GOBAIN ABRASIVES S.A. 190, BD J.F. KENNEDY L- 4930 BASCHARAGE Declares that this product: TR 200 E 70184625285 Tile saw: Code: 70184630394 is in conformity with the following Directives:  European Machinery Directive 2006/42/EC ...
Page 5: Table Of Contents
TR 200 E OPERATING INSTRUCTIONS Basic Safety Instructions Symbols 1.2 Machine plate Safety instructions for particular operating phases Machine description Short description Purpose of use Layout Technical Data Assembly and commissioning Assembly on the folding frame Cutting head Tool assembly Guide-a-cut assembly Electrical connections Starting the machine...
Page 6: Basic Safety Instructions
1 Basic Safety Instructions The TR200E is exclusively designed for the cutting of tiles mainly on construction sites. Uses other than the manufacturer's instructions shall be considered as contravening the regulations. The manufacturer shall not be held responsible for any resulting damage. Any risk shall be borne entirely by the user.
Page 7: Machine Plate
 Always cut with the blade guard in position.  Only fit NORTON diamond blades with continuous rim to the machine! The use of other tools can damage the machine!  Read the blades’ specifications carefully to choose the correct tool for your application.
Page 8: Machine Description
2 Machine description Any modification, which could lead to a change in the original characteristics of the machine, may be done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity with the safety regulations. 2.1 Short description The TR200E Tile saw is designed for durability and high performance for onsite wet and dry cutting operations of a wide range of tiles.
Page 9: Technical Data
Water cooling (4) The coolant system comprises:  A submersible mechanical water pump.  Plastic suction pipe delivering the water from the water pan to the cutting head.  A removable large capacity plastic water pan located under the cutting table to reduce water loss.
Page 10: Assembly And Commissioning
3.3 Tool assembly Only NORTON continuous rim blades with a maximum diameter of 200 mm can be used with the TR200E. All tools used must be selected with regard to their maximum permitted cutting speed for the machine’s maximum permitted rotation speed.
Page 11: Guide-A-Cut Assembly
3.4 Guide-a-cut assembly  Secure the materials stop on the table.  Insert the guide-a-cut in the materials stop on the table  Set the guide in the desired position before tightening the screws 3.5 Electrical connections Check that,  the voltage/phase supply corresponds to the information indicated on the motor plate.
Page 12: Transport And Storing
4 Transport and storing 4.1 Securing for transport Before transporting the machine, always remove the blade and empty the water pan. Secure the cutting head on a column by using the knob. 4.2 Long period of inactivity If the machine is not going to be used for a long period, please take the following measures: ...
Page 13: Operating The Machine
5 Operating the machine 5.1 Site of work 5.1.1 Siting the machine  Remove from the site anything, which might hinder the working procedure!  Make sure the site is sufficiently well lit!  Observe manufacturer's conditions for connecting to power supplies! ...
Page 14: Maintenance And Servicing
6 Maintenance and servicing To ensure a long-term quality from the cutting with the TR200E, please follow the maintenance plan below: Whole machine Visual control (general aspect, watertightness) Clean Flange and blade fixing devices Clean Motor cooling fans Clean Water pan Clean Motor housing Clean...
Page 15: Faults: Causes And Cures
7 Faults: causes and cures Fault-finding procedures Should any fault occur during the use of the machine, turn it off, and isolate it from the electrical supply. Any works dealing with the electrical system or supply of the machine can only be carried out by a qualified electrician.
Page 16: Circuit Diagram
Spare parts for the motor can be ordered with the manufacturer of the motor or with their dealer, which is often quicker and cheaper. This machine has been manufactured by Saint-Gobain Abrasives S.A. 190, Bd J.F. Kennedy L- 4930 BASCHARAGE Grand-duché de Luxembourg. Tel. : 00352- 50 401-1 Fax : 00352- 50 16 33 http://www.construction.norton.eu e-mail: sales.nlx@saint-gobain.com...
Page 17 Tel : 0845 602 6222 e-mail: sales.nlx@saint-gobain.com Free fax : 0800 622 385 e-mail : nortondiamonduk@saint-gobain.com Czech Republic Austria Norton Diamantove Nastroje Sro Vinohrdadska 184 Saint-Gobain Abrasives GmbH CS-13000 PRAHA 3 Telsenberggasse, 37 Tel: 0042 0267 13 20 21 A-5020 SALZBURG...
Page 20 SAINT-GOBAIN ABRASIVES 190, Bd. J. F. Kennedy L-4930 BASCHARAGE LUXEMBOURG Tel.: ++352 50401-1 Fax: ++352 501633 e-mail: sales.nlx@saint-gobain.com www.construction.norton.eu 08.12.2008...