General Maintenance - Giant SUSPENSION Quick Start Manual

GENERAL MAINTENANCE

1) Inspect all suspension bolts and tighten if necessary to required torque settings. If unsure,
take your bicycle to your Authorized Giant Retailer immediately for inspection.
2) Do not use high-pressure water sources to wash or rinse your bicycle. Doing so can displace
any lubricants that are present, as well as possibly forcing water and/or contaminants into the
bearing that can harm the pivot and bearing, reduce performance, and cause premature wear.
Use only water at low pressure, or fill a bucket with water and use a soft nylon bristle brush
and mild dish soap to clean the frame and components.
9