Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TechniSat HD-S 223
Summary of Contents for TechniSat HD-S 223
- Page 1 Operating instructions HD-S 223 DVR...
- Page 2 It will help you to use the HD-S 223 DVR safely and as intended. It is intended for any person who installs, connects, operates, cleans or disposes of the receiver. Keep the operating instructions in a safe place for future reference.
-
Page 3: Table Of Contents
Important note on data backup..................10 Disposal instructions......................11 Legal matters........................13 Service notes........................14 Preparing the HD-S 223 DVR for operation..............15 Connection to DVB-S satellite system................15 Connection to a television set..................15 Connection of external USB storage medium ..............16 Connection to a hi-fi/Dolby Digital system...............16 Remote control / Change of series................16... - Page 4 Multimedia ........................40 10.1 Film ..........................40 10.2 Photo ..........................41 10.3 Music..........................41 10.4 Admission management ....................42 10.5 File manager ........................42 Timer ..........................43 Service..........................44 12.1 Switching on and off ......................45 12.2 Programme selection.......................45 12.3 Info box ...........................47 12.4 Volume control.........................48 12.5 TV/radio switching ......................48 12.6 Dolby Digital (AC3 operation)..................49 12.7...
-
Page 5: Device Illustration
Device illustration Front view Display Back Scart connection HDMI connection USB interface LNB input Optical digital audio output (side) -
Page 6: Remote Control
Remote control 0 / Recording Not documented WWW / Internet Zoom Not documented HDMI resolution Still image... -
Page 7: Read Biue First
Before connecting and operating the device, first check that the scope of delivery is complete and familiarise yourself with the safety instructions. The scope of delivery includes 1 TechniSat HD-S 223 DVR receiver, 1 Operating instructions 1 remote control, batteries (2 pcs. 1.5V AAA microcells) -
Page 8: Intended Use
For your protection, you must read the safety precautions carefully, before using your new appliance. The manufacturer accepts no liability for damage caused by improper handling and non-compliance with safety precautions. Leakage currents may occur in electrical appliances due to their function. These are permissible and harmless, even if they can be perceived as a slight "tingling"... - Page 9 Do not place any burning objects, e.g. lighted candles, on the appliance. Do not expose the appliance to dripping or splashing water and do not place any objects filled with liquid, e.g. vases, on it. If water gets into the appliance, unplug it immediately and contact the service centre.
-
Page 10: Breaks In Operation
We recommend that you remove all storage media or data carriers before returning the device to your specialist dealer for maintenance. The restoration of data is not part of the maintenance and repair work. TechniSat accepts no liability for the loss or damage of data during the repair. -
Page 11: Disposal Instructions
Disposal instructions The packaging of your appliance consists exclusively of recyclable materials. BiGe will sort them accordingly and return them to the "Dual System". At the end of its service life, this product must not exceed the It must not be disposed of as normal household waste, but must be handed in at a collection point for the recycling of electrical and electronic equipment. - Page 12 Disposal of the appliance: Old appliances are not worthless waste. Valuable raw materials can be recovered through environmentally friendly disposal. Please enquire at your local authority about the options for disposing of the appliance in an environmentally friendly and appropriate manner. Before disposing of the appliance, any batteries should be removed.
-
Page 13: Legal Matters
The names of the companies, institutions or brands mentioned are trademarks or registered trademarks of their respective owners. TechniSat is not liable for product damage due to external influences, wear and tear or improper handling, unauthorised repairs, modifications or accidents. -
Page 14: Service Notes
Mon. - Fri. 8:00 - 17:00 under Tel.: 03925/9220 1800. Repair orders can also be submitted directly online at www.technisat.de/reparatur, can be analysed. If you need to return the device, please use only the following address: TechniSat Teledigital GmbH Service Centre Nordstr. -
Page 15: Preparing The Hd-S 223 Dvr For Operation
Preparing the HD-S 223 DVR for operation Connection to DVB-S satellite system Connect the LNB input of the HD-S 223 DVR to the DVB-S satellite system using a suitable Satellite cable (F connector) with the LNB of your outdoor unit. -
Page 16: Connection Of External Usb Storage Medium
Connection of external USB storage medium Connect an external USB storage medium, e.g. an external hard disc, to the USB interface on the back of the receiver using the USB cable of the storage medium. Depending on the device type, the external USB mass storage device must also be supplied with power via a separate power supply unit. -
Page 17: Grid Connection
Mains connection The HD-S 223 DVR may only be connected to the mains when the device is completely connected to the associated components. This prevents damage to the device or other components. > After you have made all the connections as described above, connect the mains plug of the HD-S 223 DVR to a 230V~/50Hz mains socket. -
Page 18: Operating Language
Operating language > When starting the installation wizard, the selection window for the operating language appears first. > Use the up/down arrow buttons to select the desired operating language. > Confirm with OK to accept the selection and go to the country selection. Country selection >... -
Page 19: Av Output
AV output > In this point, select the signal path via which the receiver is connected to the TV. > Confirm with the OK button to accept the selection and move on to the next setting. Antenna setting Here you can adapt the receiver to your satellite antenna system. The receiver is preset at the factory with the parameters for receiving Astra 19.2 on a standard satellite reception system. -
Page 20: Menu Structure And Operation
Menu structure and operation All settings can made via the menu in the device. > Press the MENU button on the remote control to access the main menu. > Use the up/down/left/right arrow keys to select the settings you want to edit. >... -
Page 21: Channel Search
> Language You can change the operating language of the device under this item. Channel search Now that you have connected your digital receiver and put it into operation, you can optimise the digital receiver for your application if necessary. Automatic search You can perform a complete search within one or more satellite positions. -
Page 22: Satellite Search
Satellite search If you have a satellite system for receiving several satellite positions, this search is recommended. > Select Channel search and confirm with OK. > Select the Satellite line. > In the Satellite line, use the right/left arrow buttons to select the satellite position on which you want to perform a search. - Page 23 > Switch to the Frequency field and press the OK button. > Now select a transponder on which you would like to perform a search. Press > Switch to the Polarisation field and press the OK button. > Now select the polarisation on which you want to perform a search. Press >...
-
Page 24: Edit Programmes
Edit programmes The Edit channels menu item allows you to conveniently edit the available TV and radio channels. Here you can change the order of the stored TV and radio channels according to your wishes and create new favourite lists >... - Page 25 > Press the red function button. > If you want to delete the programme, confirm the following prompt with Yes and the OK button. 8.1.2 Locking programmes The device offers the option of providing programmes with a PIN query. This is useful if you want to protect children from adult content, for example.
-
Page 26: Edit Favourites Lists
> Use the up/down arrow keys to select a new position and then move the programme using the yellow [move] function key. 8.1.4 Skip programmes You can skip one or more programmes in order not to select them during operation using the up/down arrow buttons. -
Page 27: Switch-On Programme
> Use the blue function button to select a favourites list in which you would like to save programmes. > Now use the OK button to select programmes to be displayed in this list. > Press the BACK button to save the settings. Switch-on programme You can use the Switch-on programme function to define a programme with which the receiver is started via the standby button when it is switched on. -
Page 28: Delete All Programmes
> Switch on the function via the Switch-on programme line. > In the Start programme mode line, select whether the receiver should start with a programme from the TV list or with a programme from the radio list. > In the Switch-on programme line, select the programme with which the receiver should switch on. -
Page 29: Settings
Settings In the Settings submenu, you can set various settings such as the system clock time, antenna configuration or audio/video output signals as well as the menu language Date/Time Here you can set the time and date of the device. The device receives the current time and date automatically if an aerial signal is present. -
Page 30: Customised Settings
9.1.3 Summer time/winter time In the Summer time line, switch summer time on or off according to the current time. Customised settings 9.2.1 Language settings > Press the Menu button. > Switch to the Settings menu item and confirm with OK. >... - Page 31 programmes can be blocked. Enter the youth protection level under the menu item Youth protection. These numbers indicate the age. If, for example, a programme is not suitable for viewers under the age of 16, the PIN must be entered in order to watch the programme. Please note that this function is only available in some countries and depends on the data provided by the broadcaster.
-
Page 32: Audio-Video Settings
> Press the OK button to save. 9.2.4 Standby clock Here you can switch the standby clock, which is shown on the display in standby mode, on or off. When the standby clock is switched on, the power consumption in standby mode also increases. -
Page 33: Antenna Settings
To optimise the resolution your TV set, select the format according to your TV set. Please also refer to the instructions and technical data provided by the manufacturer of your TV set. If you have selected one of the resolutions 480p/i or 576p/i, you can now adjust the picture format under AV output. - Page 34 The receiver is preset at the factory with the parameters for the most common satellite systems and satellite positions. You should therefore only change the settings if you satellite positions that are not yet preset in the device. Please also ask your specialist dealer or installation company about this.
- Page 35 9.4.1 Satellite In this section, set the satellite positions that you can receive with your satellite system. > Select the Satellite item using the up/down arrow buttons. > Press the OK button. A list opens with the available satellites, which you can then select using the up/down arrow buttons.
- Page 36 9.4.8 DiSEqC In these fields, use the up/down arrow buttons to set the satellite position that is controlled via DiSEqC. This setting depends on the satellite reception system and the associated modules. 9.4.9 Sat-CR configuration To activate the SCR configuration, the Unicable 1 (EN50494) or Unicable 2 (EN50607) LNB must first be selected under LNB type.
-
Page 37: Sokware Update
SoŁware via USB You can use the USB interface to update the operating software of your receiver, which, if necessary, can be downloaded from the download area of your receiver on the TechniSat website www.technisat.de. The software provided on the website must be unpacked. Then transfer the unpacked file to a suitable storage medium and connect it to the receiver via USB. - Page 38 9.5.2 SoŁware update via satellite The receiver can load new software via satellite if this is available. To load the software, the satellite and frequency must be specified. > Select SoŁwareupdate via Satellt and confirm with OK. The following parameters are preset and do not usually need to be changed: Satellite Astra Frequency...
-
Page 39: Factory Settings
> Press the blue Database backup function button. 4 files are now backed up on the USB storage medium, which can also be selected again directly to restore them: userdb XXXX.bin -> Contains the current satellite programme list. dbsystemset XXXX.bin -> Contains all current settings. systemset XXXX.bin ->... -
Page 40: Multimedia
You can use the USB interface to update the operating software of your receiver, which may be available for download at www.technisat.de. You can then transfer this to an appropriate storage medium and connect it to the receiver via USB. -
Page 41: Photo
> Select Use the arrow buttons to select the "Film" menu item. > Confirm with OK. > Then select the path for the file you want to play and press the OK button. 10.1.1 Playback control You can control film playback using the play/pause, stop, fast forward and rewind buttons. and rewind control. -
Page 42: Admission Management
10.4 Recording management You can delete, rename or delete all DVR recordings in the recording management. > Press the Menu button. > Switch to the Multimedia menu item and confirm with OK. > Use the arrow buttons to select the "Recording management" menu item. >... -
Page 43: Timer
You will be asked whether you really want to format the data carrier. > To format, use the left/right arrow buttons to select> OK. If you do not want to format the data carrier, press the BACK button. T imer Similar to a video or DVD recorder, you can use the receiver to programme recordings in order to record programmes when you are not at home, for example. -
Page 44: Service
Date Enter the date on which the recording should start here. Programme name Set the programme you want to record here. To do this, press the OK button in the Programme name line and select the programme to be recorded in the newly opened window. Confirm with OK. Start time Highlight the Start time line, press OK and enter the time here using the numeric buttons on the remote control at which you want to start the... -
Page 45: Switching On And Off
the receiver is booted up and starts with the last programme set. > Press this button again to switch the appliance off again. Depending on the setting, the time is also shown on the display in standby mode (see chapter 9.2.4). 12.2 Programme selection 12.2.1... - Page 46 The device can only display the programmes if the satellite system is designed to receive the respective satellite positions. The standard satellite position for receiving most German- language programmes is Astra 19.2 degrees East. If you can also receive other satellite positions with your reception system, a search must be carried out as described in chapter 7.2.
-
Page 47: Info Box
> Confirm with OK. The favourites list you have created is now displayed. 12.3 Info box After each programme change, an info box appears briefly with the programme characteristics such as programme position, programme name and programme title. In addition, further programme characteristics are displayed, such as teletext, as well as a display showing whether EPG data is available. -
Page 48: Volume Control
> To longer information texts, navigate in the text window through the Arrow keys up/down. > Press the BACK button to return to normal operation. 12.4 Volume control You have the option of controlling the volume of your receiver. This makes it easier to use the receiver, as you have all the important functions on one remote control and rarely have to use the remote control of your TV set. -
Page 49: Dolby Digital (Ac3 Operation)
This also takes you directly to the multimedia area Film, Photo, Music and DVR. See chapter 10 for more details. 12.6 Dolby Digital (AC3 operation) The receiver can receive digital sound. If a programme is broadcast with digital sound (AC3), this sound can be activated. -
Page 50: Teletext
> Select the desired programme and confirm with OK. 12.8 Teletext If broadcast, you can use the integrated teletext decoder to display the teletext information of the individual programmes. > Switch on the programme from which you want to view teletext information. >... -
Page 51: Subtitle
12.9 Subtitle Some programme providers broadcast subtitles for various programmes. To switch on the subtitle display function, proceed as follows: > Press the OPT button. Use the up/down arrow buttons to switch to the "Subtitles" field and press OK. > In the bottom line, you can change the language using the up/down arrow buttons. -
Page 52: Direct Recording
13.1 Direct recording You can record a programme directly during operation. > Press the Record button while a programme is running. A recording control window is displayed. Here you can see which programme is being recorded. The device also shows you the amount of free space on the USB data carrier. You can close the window by pressing the EXIT button. -
Page 53: Timeshik
13.2 TimeshiŁ The receiver has a so-called timeshift function in USB recording mode. This function utilises the possibility of simultaneous playback and recording. This makes time-shifted television possible (timeshift). This is useful if you want to pause a current programme in order to continue watching it at a later point in time from the paused position. -
Page 54: Electronic Programme Guide Epg
> To continue watching the programme at the paused point, press the Play/Pause button again. > You can now continue the programme from the point at you started the timeshift. The programme will continue to be recorded in the background. While the timeshift is active, you can fast-forward or rewind the recording within the timeshift time. - Page 55 > You can view the EPG data for the individual programmes for the next 7 days. To change the date from which you want to read programme information, use the blue function button to select the next day or the yellow function button to select the previous day. >...
-
Page 56: Sleep Timer
A red symbol appears next to the programme name. If you want to change a timer programmed in this way at a later date, you must do this manually via the timer menu (see chapter 11). 13.4 Sleep timer The receiver has a sleep timer. A time can be set after which the device switches off automatically. >... - Page 57 13.6.1 Save programme list to USB You can save a programme list to a USB data carrier under this menu item. To do this, proceed as follows: > a USB data carrier to the device. Please also note the information on USB data carriers. >...
-
Page 58: Technical Data
Technical data DVB-S/S2 tuner Input frequency range: 950 ..2150 MHz Input level range: - 65 dBm ... - 25 dBm DVB-S2 tuner input: F - socket Input/output impedance: 75 Ohm Output for 1. ZF: 950 ..2150 MHz (loop through) Demodulation: QPSK S2 Symbol rate: 2 ..45 Mbaud/s... -
Page 59: Troubleshooting Aids
Troubleshooting aids Error Possible cause Remedy No picture, no sound, No mains voltage Check mains cable and plug display/LED does not light up No reception for programmes Check antenna Antenna misaligned or that were previously OK defective Carry out a search Programme is transmitted another transponder Programme is no longer... - Page 60 No picture, no sound, Short circuit in the LNB supply Switch off device, eliminate display/LED lights up line short circuit, put device back into operation Defective or missing cable Check all cable connections connection Defective LNB Replace LNB Wrong outdoor unit set on the Correct setting receiver Antenna incorrectly aligned...
Need help?
Do you have a question about the HD-S 223 and is the answer not in the manual?
Questions and answers