Download Print this page

Giant CLIP AND GO - FOLDING GUIDE 2009 Manual page 2

Advertisement

CLIP AND GO GUIDE
Thanks for purchasing the CLIP folding bicycle! This guide will help you properly fold and unfold your
CLIP. Please read it thoroughly!!
NOTE: bEfORE RidiNG yOUR clip fOldiNG bicyclE fOR ThE fiRST TiME, MAKE SURE
TO fAMiliARiZE yOURSElf wiTh ThE lOcATiON ANd OpERATiON Of All ThE qUicK
RElEASE lEvERS ON yOUR clip.
seat post quick release
kickstand quick release
1. before each ride, check to make sure all latches and quick release levers are properly
secured. Make sure that the seat post and kickstand quick release levers are securely
fastened and that the seat post and kickstand do not slip.
2. do not over-tighten the quick release levers. Always hand-tighten until clamping is
snug. Never use a tool or wrench to tighten the quick release levers.
3. Never ride the folding bicycle if the frame or quick release levers are damaged!!
FOLDING INSTRUCTIONS
STEP 1
In order to allow the CLIP to properly stand on a level surface after folding, open the seat post quick
release (FIG. 1) and kickstand quick release (FIG. 2) and then push the saddle down almost to the
bottom (FIG 3). The kickstand will extend and lock (FIG. 4). Then close both quick releases.
FIG. 1
FIG. 2
1. do not sit on the clip saddle when its kickstand is extended and locked in the parked
position!
2. Make sure that the kickstand is completely folded up and retracted into the frame so that
there is at least 7½ inches (20 cm) of clearance from the ground when riding the clip.
handlebar stem quick release
frame quick release
caution
FIG. 3
FIG. 4
CAUTION
FOLDING INSTRUCTIONS (continued)
STEP 2
Steady the bike frame and unlock the frame quick release on the top tube (FIG. 5). Next, unlock the
quick release on the down tube by pushing back on the spring-loaded safety lock and opening the
quick release (FIG. 6).
FIG. 5
FIG. 6
STEP 3
Fold the frame (FIG. 7).
FIG. 7
NOTE: MAKE SURE ThE clip ON ThE fRONT whEEl lOcKS SEcUREly iNTO ThE plASTic
hOldER ON ThE REAR whEEl (fiG. 8 ANd 9).
FIG. 8
FIG. 9
STEP 4
Turn the knob of the handlebar stem quick release counter-clockwise (FIG. 10). After the handlebar
stem releases, it can be folded downward (FIG. 11).
FIG. 10
FIG. 11

Advertisement

loading

Related Products for Giant CLIP AND GO - FOLDING GUIDE 2009

This manual is also suitable for:

Clip and goClip