MT606FG MANUAL EPIRB ACTIVATION MT606G EPIRB ACTIVATION EPIRB
A CTIVATION
EPIRB Activation “Placard” – Page 2 It is intended That Shez will recreate this monotone image with similar “close-up” images of the MT605G supplied to her. Samples shown to the right.
REGISTRATION AND TRANSFER OF OWNERSHIP ......7 Congratulations on purchasing your new Accusat™ EPIRB. EPIRB Purchase or Transfer Advice ..........7 The Accusat™ MT606G and MT606FG are the most advanced 406 MHz, Transferring Ownership ..............7 AIS equipped digital satellite beacons available today. GME have developed Australian Users ................
The MT606G is the basic fully-functional EPIRB. The MT606FG model upon completion of the sale and mail, fax or email the registration form to comprises an MT606G in a housing with an automatic release mechanism the relevant national authority. which opens and releases the EPIRB clear when submerged to water from 1 m to 4m depth.
A beacon that shows signs of damage or degradation, may not be fit for • The yellow collar on the MT606G bracket and the internal mechanism of use in an emergency. Contact GME or your local distributor for further the MT606FG auto-release housing contain special features which inhibit advice.
50.3 mm INSTALLING THE MT606G RELEASE AND STOWAGE 1. Remove the EPIRB from the bracket. TO REMOVE THE MT606G EPIRB 2. Hold the mounting bracket in place and mark the location of the NOTE: DO NOT remove the beacon from the housing if it is wet, it may mounting holes.
Stock: Clear Polycarbonate Sheet Uv Stabilised 0.4mm Thick with Stock: Clear Polycarbonate Sheet Uv Stabilised 0.4mm Thick with A Matt Textured Surface On Face Side. JIRA REFERENCE Matt Textured Surface On Face Side. ECO # Print: Screen Print 2 Colours on the Non Face Side Per Artwork. Print: Screen Print 2 Colours on the Non Face Side Per Artwork.
7. At this point, when the EPIRB has been deployed and has facilitated a satisfactory operation should still be achieved rescue, it must not be used further. Contact GME or your local distributor when operating the EPIRB out of water: for assistance.
5. A beacon that shows signs of damage or degradation, may not be fit for GENERAL SELF TEST use in an emergency. Contact GME for further advice. Note: The ‘General’ Self Test function does not test GNSS acquisition. The 6.
If the EPIRB repeatedly fails the testing process (long red includes the operation of the special GNSS antenna. This test consumes LED and low beep at the end) you should contact the GME much more power than a general self-test, So before you begin, choose service department for advice.
Short green LED EPIRB is undergoing a GNSS flash after you self-test If returning your EPIRB to your dealer or GME branch office for repair or press and hold the scheduled battery replacement, you should inform the transportation TEST button for 4 company beforehand that your EPIRB contains lithium batteries.
UHF(406) and VHF(AIS) test messages containing GNSS co-ordinates. OPERATION Can be activated manually or by contact with water: MT606G is activated by water when manually released from the bracket Activation: MT606FG is activated by water when manually released or automatically freed from the housing...
Operating -20°C to +55°C Temperature: USEFUL LIFE Storage -30°C to +70°C MT606G MT606FG Not exceed 10 Years from date of manufacture. Temperature: Battery Service Not more than 2 battery replacements. Must not Weight: 695 g (including bracket) extend use of beacon beyond 10 years.
If we are satisfied that the complaint is justified, (We, us, our or GME). Our contact details are set out in clause 2.7. This and as our sole liability to you under this warranty (to the extent warranty statement only applies to products purchased in Australia.
Page 15
GME Pty Ltd 17 Gibbon Road, Winston Hills NSW 2153, Australia Part Number: 311156 Drawing Number: 52534-3...
Need help?
Do you have a question about the MT606G and is the answer not in the manual?
Questions and answers