Heavy lifting – WARNING Device overview SD-025 Mk.II Specifications 2. Connecting 7. Examples operation Turning the SD-025 Mk.II on and off Changing offset volume for inputs Connecting the SD-025 Mk.II Changing display brightness The rear panel Changing initial volume step...
FROM THE CREATOR Foreword First of all, thank you for choosing the Vitus Audio SD-025 Mk.II Generally we’re after super neutral, super detailed and super dynamic Signature DA Converter, we are sure you will enjoy it for many reproduction without “loosing” the nerve in the music which often is a drawback of many high end amplifiers.
This is your SD-025 Mk.II owner’s manual. The following pages Building on our dedication to neutral music reproduction, our Signature will,as clearly as possible, describe how to get your SD-025 Mk.II Series is a downscaled option to our Masterpiece Series. Every detail operating quickly and easily.
What’s in the box, and how SD-025 Mk. II device overview to correctly unpack it The body of the SD-025 Mk.II is constructed of Aluminium Material: Aluminium Gently cut open the tape on the top of the box, making sure not...
1. GETTING STARTED 2. CONNECTING Turning the SD-025 Mk.II on and off Always turn on the products beginning from the source: Source pre-amplifier power amplifier Always turn off your products in reverse order: Power amplifier pre-amplifier Source Not following this procedure, may cause damage to any of your products/speakers.
2. CONNECTING 2. CONNECTING Connecting the SD-025 Mk.II The rear panel Place the SD-025 Mk.II on its shelf. Connect all the sources to the WIFI Dongle Toslink IN Ethernet Service Port inputs of the SD-025 Mk.II. Connect the output of the...
1. NORMAL This is the mode you use when listening to music. 2. MENU In this mode you can alter the settings of the SD-025 Mk.II. 3. STANDBY In this mode the controls of the SD-025 Mk.II are deactivated. 14 | SD-025 Mk.II Owner’s manual...
Go to the next character in the display 3. STANDBY 3. s 3. s 3. s Switches in and out of “Standby Mode” Scroll backward in the menu Turns volume down Change selected character 16 | SD-025 Mk.II Owner’s manual SD-025 Mk.II Owner’s manual | 17...
The elements in the menu The elements in the menu You can modify the settings of your SD-025 Mk.II by entering the menu and selecting the options you require. Refer to the menu structure diagram on page 21 for specific information.
USE AT OWN CAUTION Use this setting with extra care. One accidental click could turn the volume up to 0 dB. Not available on streamer input **** 20 | SD-025 Mk.II Owner’s manual SD-025 Mk.II Owner’s manual | 21...
Mains fuse Fuse type: Vitus Audio products are designed to run for many years without Any unit may be set for operation in 100V, 115V or 230V/240V AC. The mains fuse is accessible from the outside of the amplifier. You Physical size - 20 x 5mm the need for regular maintenance.
REMOVE THE POWER CABLE Take a small flat bladed screwdriver and place it under Open the fuse carrier. Push the fuse carrier back into the back of the SD-025 Mk.II. The fuse carrier is in place when you hear “CLICK”. the fuse carrier.
3. Insert the USB-Drive into the service port, located on the rearplate. or when adding extra features to the product. 4. Turn ON the power to the SD-025 Mk.II by switching the power button to I on the rearplate. You can contact your local Vitus Audio dealer if you are uncertain 5.
XLR Analog RCA Analog Audio or an authorised Vitus Audio repair center by the customer damage to chassis parts. (See 6) at his or her sole expense. Vitus Audio will pay return freight of Available 1 (L+R) 1 (L+R) 2. CONDITIONS its choice.
STANDBY EXAMPLE 1 Changing offset volume for inputs A specific volume offset on the SD-025 Mk.II can be set on each individual input, to accomodate for different output levels of different sources. YOU PRESS YOU SEE This can be used to reduce the difference in output level, when switching between inputs.
Changing initial volume step The display on SD-025 Mk.II can be set to different brightness levels You can set the volume step that the SD-025 Mk.II will initialise on, according to your preference. every time it is taken out of standby mode.
Disabling inputs Example copy to be confirmed by client Each individual input on the SD-025 Mk.II can be disabled in the The input display text of the SD-025 Mk.II can be set on each menu. individual input. This will remove the input from being shown when changing inputs...
Setting fixed volume for inputs Configuring auto standby Each individual input on the SD-025 Mk.II can be set to a fixed vol- The SD-025 Mk.II can be configured to automatically go into standby ume in the menu. The input is then locked to the set volume step and...
RES:YES. Then press select and the SCD-025 will reset itself and go into standby. The product has now been reset to factory settings and put into standby mode. 38 | SD-025 Mk.II Owner’s manual SD-025 Mk.II Owner’s manual | 39...
Page 21
HANDCRAFTED IN DENMARK AVA Group A/S (Vitus Audio) Hammershusvej 3L DK-7400 Herning Denmark Phone: +45 9626 8046 e-mail: sales@avagroup.nu Web: vitusaudio.com...
Need help?
Do you have a question about the SD-025 Mk.II and is the answer not in the manual?
Questions and answers