Stryker Vocera V5000 Smartbadge Quick Reference Manual

Note: Always keep the top of the
Smartbadge oriented toward your
mouth and do not block any of the four
directional microphones with your fingers.
Microphone
array
Speaker
Holding the Smartbadge
covers the speaker and
microphone array
Connecting a headset
If you clip the Smartbadge to any part of
your clothing that is more than 6 to 12
inches (15 to 30 centimeters) inches from
your mouth, you must wear an earphone or
microphone-style headset (sold separately).
You could also wear a headset when you
want more privacy or are working in a
noisy environment.
Vocera, part of Stryker
3030 Orchard Parkway
San Jose CA, 95134
t: +1 408 882 5100
f: +1 408 882 5101
toll free: +1 888 9VOCERA
info@vocera.com
vocera.com
Plug the headset into the headset jack at the
bottom of the Smartbadge. When you attach
a headset, the Smartbadge automatically
switches to using the microphone and speaker
of the headset.
Plug headset into the
headset jack
FCC notification
When wearing the Vocera V5000 Smartbadge,
always use a Vocera-supplied or approved
holster lanyard or grip clip to ensure compliance
with FCC RF exposure guidelines.
Stryker Corporation or its divisions or other corporate affiliated
entities own, use or have applied for the following trademarks or
service marks: Stryker, Vocera. All other trademarks are trademarks of
their respective owners or holders. The absence of , a product or
service name or logo from this list does not constitute a waiver of
Stryker's trademark or other intellectual property rights concerning
that name or logo. Copyright © 2022 Stryker.
AC_SB_Accessories_QuickReferenceGuide_10_26_22.
Part No. 930-01885 Rev. C.
Vocera V5000
®
Smartbadge series
accessories
quick reference
guide