Subscribe to Our Youtube Channel
Related Manuals for Siemens SR65EX09ME
Summary of Contents for Siemens SR65EX09ME
- Page 1 SR65EX09ME Dishwasher EN Information for Use Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
en Table of contents You can find additional information and explanations online. Scan the QR code on the title page. Table of contents Table of contents 1 Safety .......... 3 8.4 Folding prongs ...... 2 1 1.1 General information... -
Page 3: Safety
Safety en 14.4 Setting timer programming ... 3 2 18 Troubleshooting ...... 4 2 14.5 Starting the programme .. 3 2 18.1 Clean wastewater pump .. 4 8 14.6 Interrupting programme .. 3 3 19 Transportation, storage and 14.7 Terminate programme... -
Page 4: Restriction On User Group
en Safety ¡ in closed rooms in the home and with similar applications, e.g.: in canteens in shops, offices and other work environments; in agricultural businesses; use by customers in hotels, motels and other typical home environments; in bed and breakfasts. ¡... - Page 5 Safety en isolating switch must be integrated into the permanent electrical installation according to the installation regulations. When installing the appliance, check that the power cable is not trapped or damaged. Cutting through the supply hose or immersing the Aqua-Stop valve in water is dangerous. Never immerse the plastic housing in water.
-
Page 6: Safe Use
en Safety 1.5 Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause seri- ous harm to health. Follow the safety instructions and directions for use on the packagings of detergent and rinse aid products. -
Page 7: Damaged Appliance
Safety en Never expose the appliance to intense heat or humidity. Do not use steam- or high-pressure cleaners to clean the appli- ance. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance parts or heat sources. - Page 8 en Safety Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts. Children may become trapped in the appliance and suffocate. Use the childproof lock if fitted. Never let children play with or operate the appliance.
-
Page 9: Preventing Material Damage
Preventing material damage en Modified or damaged water hoses 2 Preventing material may result in material damage and Preventing material damage damage damage to the appliance. Never kink, crush, modify or cut 2.1 Safe installation through water hoses. Only use the water hoses supplied ATTENTION with the appliance or genuine Improper installation of the appliance... -
Page 10: Environmental Protection And Saving Energy
en Environmental protection and saving energy So as not to scratch the finish on The sensor has different sensitivity the appliance, do not use sponges settings that can be changed in the with a rough surface or abrasive basic settings. "Changing basic settings", cleaning agents. -
Page 11: Installation And Connection
Installation and connection en If automatic door opening is deactiv- Quick reference guide ated, energy consumption increases 4.2 Installing and connecting and the drying phase is usually the appliance shortened. "Overview of the basic settings", You can position your built-under or Page 33 integrable appliance in a fitted kit- If this additional function has been chen between wooden and plastic... -
Page 12: Drinking Water Connection
en Installation and connection Also check that there is no cover 4.5 Electrical connection in the drainage system preventing Connecting the appliance to the the wastewater from being dis- electricity supply charged. Notes 4.4 Drinking water connection Follow the Safety instructions Page 4 . Connect your appliance to a drinking ... -
Page 13: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. Rating plate with E number and FD number Page 50 . Rating plate The data you need for Customer Service Page 50 . -
Page 14: Controls
en Familiarising yourself with your appliance Page 40 Filter system Filter system Add the special salt to the dispenser for Dispenser for special salt special salt. "Water softening system", Page 23 During the wash cycle tablets automatically fall out of the detergent dispenser into the Tablet collecting tray tablet collecting tray where they can fully dissolve. - Page 15 Familiarising yourself with your appliance en With some buttons you can perform different functions. 3 4 5 6 Page 32 Switching on the appliance Page 33 ON/OFF button and reset Switching off the appliance button Terminating the programme Page 33 Programme buttons Programmes Page 16 ...
-
Page 16: Programmes
en Programmes The display shows information about the remaining running time or the basic settings. You can change the basic set- Display tings via the display and the setting buttons. "Changing basic settings", Page 37 If you press for approx. 3 seconds, you can open the basic set- button tings. - Page 17 Programmes en The running time may vary depending on the programme selected. The running time depends on the water temperature, the quantity of tableware, the level of Page 18 selected. The running time and soiling and the Additional function energy consumption will increase if the rinse aid system is switched off or if rinse aid needs to be added.
-
Page 18: Information For Test Institutes
en Additional functions Programme Programme sequence "Favourite ", Page 18 Favourite Note: The relatively long running time The pre-rinse program is saved to in the Eco 50 ° programme is due to this button at the factory. Pre-rinse is longer soaking and drying times. This suitable for all types of tableware. -
Page 19: Features
Features en Symbol Additional func- tion HygienePlus To ensure a higher hygiene status for the ap- pliance and tableware, the temperature is raised and maintained for an extra-long period. Especially suitable for cleaning chopping boards or baby bottles. Continuous use of this function increases the hygiene status. -
Page 20: Top Basket
en Features 8.1 Top basket Raise or lower the basket evenly to the right level. Arrange cups, glasses and small items of tableware in the top basket. Check that the basket is level on both sides. Release the levers. You can adjust the height of the top The basket clicks into position. -
Page 21: Bottom Basket
Features en 8.3 Bottom basket 8.4 Folding prongs Arrange pans and plates in the bot- Use the folding prongs to position tom basket. tableware securely, e.g. plates. Large plates up to a diameter of You can fold the prongs down to po- 31 cm can be arranged in the bottom sition pans, bowls and glasses basket as shown. -
Page 22: Cutlery Drawer
en Features Using the bottle holder To fold down a side shelf, push the lever forwards and fold down the Fold down the holder and insert side shelf the bottle To fold down the folding spines, 8.6 Cutlery drawer push the lever forwards and fold down the folding spines Arrange cutlery in the cutlery drawer. -
Page 23: Before Using For The First Time
Before using for the first time en Appliance height 81.5 cm with cutlery drawer Level Top basket Bottom basket 1 max. ø 16 cm 30 cm/31 cm Page 21 2 max. ø 18.5 cm 27.5 cm 3 max. ø 21 cm 25 cm Start the Programme with the 9 Before using for the highest cleaning temperature... -
Page 24: Overview Of Water Hardness
en Water softening system Water hardness Hardness range mmol/l Setting value °E 11 - 12 Medium 1.5 - 1.8 H:02 13 - 15 Medium 1.9 - 2.1 H:03 16 - 20 Medium 2.2 - 2.9 H:04 21 - 26 Hard 3.0 - 3.7 H:05 27 - 38 Hard... -
Page 25: Switching Off The Water
Water softening system en Add the special salt to the dis- The water hardness is 0 - 8 °E. penser. You do not need to use special salt. Press . To open the basic settings, press for 3 seconds. The display shows H:xx. The display shows Press repeatedly until the dis-... -
Page 26: Rinse Aid System
en Rinse aid system consumption values during regenera- Add rinse aid up to the max mark. tion of the water softening system. Regeneration of the water softening system after x washing programmes Additional running time in minutes Additional water consump- tion in litres Additional power consump- 0.05 tion in kWh... -
Page 27: Switching The Rinse Aid Sys
Detergent en To save the settings, press 12 Detergent for 3 seconds. Detergent The amount of rinse aid to be dis- 12.1 Suitable detergents pensed has been set. Only use detergents that are suitable 11.3 Switching the rinse aid for dishwashers. Both separate and combined detergents are suitable. -
Page 28: Unsuitable Detergents
en Detergent is non-critical if you remember the fol- automatically to ensure the best pos- lowing: sible washing and drying result. Only choose a programme without 12.2 Unsuitable detergents PreRinse. Do not select timer programming Do not use detergent which could for starting the programme. cause damage to the appliance or present a risk to health. -
Page 29: Adding Detergent
Tableware en ing programmes will run properly Close the lid of the detergent dis- with combined detergents. penser. The function of rinse aid is limited with combined detergents. You will generally get better results using a separate rinse aid. Use tablets with a special drying performance. -
Page 30: Arrange Tableware
en Tableware Cause Recommendation The following tableware is not dish- Only put tableware in the dishwasher if washer-safe: it is marked as dishwasher-safe by the Items of cutlery and tableware manufacturer. made from wood Decorated glassware, antique and hand-crafted tableware Plastic parts not resistant to heat Tableware made from copper or tin Tableware soiled with ash, wax, lub- ricating grease or paint... -
Page 31: Removing Tableware
Tableware en To save energy and water, load Do not block the spray arms - – the machine with the number of make sure that they can turn place settings specified (standard freely. load with tableware and cutlery). Do not place small parts in the –... -
Page 32: Basic Operation
en Basic operation Press the button for the relevant 14 Basic operation additional function. Basic operation "Additional functions", Page 18 14.1 Switching on the appli- The additional function is set and ance the additional function button Press . flashes. The Eco 50° programme is set by 14.4 Setting timer program- default. -
Page 33: Interrupting Programme
Basic settings en You can only change a pro- 14.7 Terminate programme gramme when running if you can- To end a programme early or to cel it. switch from a programme that has "Terminate programme", already started, you will need to can- Page 33 cel it first. - Page 34 en Basic settings Basic setting Display text Selection Description Sensor setting SE:00 1 SE:00 - SE:02 Set the water sensor for identifying soiling. "Sensors", Page 10 1 Extra Dry d:00 d:00 - d:01 The temperature is increased during the final rinse, which improves the drying result.
- Page 35 Basic settings en Basic setting Display text Selection Description TimeLight S:01 1 S:00 - S:01 Switch TimeLight on or off. While the programme is run- ning, status information is projected onto the floor below the appliance door relating to timer programming, the pro- gramme or the time remain- ing.
- Page 36 en Basic settings Basic setting Display text Selection Description If the function has been activ- ated, the running time may in- crease. The following settings are possible: With the setting "o:00" automatic door opening is deactivated in all pro- grammes. With the setting "o:01" automatic door opening is activated in all pro- grammes.
-
Page 37: Changing Basic Settings
Home Connect en Basic setting Display text Selection Description This basic setting is not avail- able until after you have con- nected the device with the Home Connect app. "Home Connect ", Page 37 Factory setting Start with Restore changed settings to Y:ES the factory settings. Confirm with The settings for initial start-up must be configured. -
Page 38: Remote Start
en Home Connect Scan the following QR code. Tip: To deactivate the function, press 1 16.3 Smart Start Smart Start automatically determines the optimal time for the programme to start. You can use the Home Connect app to activate or deactivate the function. You can install the Home Connect app and connect your appliance Activating Smart Start via the QR code. -
Page 39: Cleaning And Servicing
Tip: You can get our tested and approved Dishwasher Care and Machine Cleaner for Dishwashers online at https://www.siemens-home.bsh-group.com/ store or from customer service. Machine Care is a programme which removes various deposits in one washing... -
Page 40: Filter System
en Cleaning and servicing Phase Removal of Detergent Placement Grease and limes- Liquid machine care Appliance interior, e.g. cale product or machine bottle hung in the cut- descaler in powder lery basket or powder form. in the interior. Food remnants and Machine cleaner Detergent dispenser deposits... - Page 41 Cleaning and servicing en Press the locking catches Micro filter gether and lift the coarse filter out Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may block the filters. After each wash check the filters for residue. Turn the coarse filter anticlockwise and remove the filter system Check that no foreign objects Clean the filter elements under run-...
-
Page 42: Cleaning Spray Arms
This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code on the title page and on our website siemens- home.bsh-group.com. WARNING Risk of electric shock! Improper repairs are dangerous. - Page 43 Troubleshooting en Fault Cause and troubleshooting Display "Check water A technical fault is present. supply" flashes Press . Unplug the appliance or switch off the fuse. Wait at least 2 minutes. Insert the mains plug of the appliance in a socket or switch on the fuse.
- Page 44 en Troubleshooting Fault Cause and troubleshooting E:32-00 will light up The filters in the water connection of the supply or alternately or indicator AquaStop hose are blocked. for water supply lights Switch off the appliance. Pull out the mains plug. Turn off the water tap. Unscrew the water connection.
- Page 45 Troubleshooting en Fault Cause and troubleshooting E:61-03 will light up alternately. Water is not drained. Not an appliance fault. Wastewater pump is blocked or the cover of the wastewater pump is loose. Clean the wastewater pump. "Clean wastewater pump", Page 48 Secure the cover of the wastewater pump so it clicks into position.
- Page 46 en Troubleshooting Fault Cause and troubleshooting All LEDs lit up or Electronics have detected a fault. flashing. Press the main switch button for approx. 4 seconds. "Controls", Page 14 The appliance is reset and restarted. If the problem occurs again: Switch off the appliance. Pull out the mains plug or switch off the fuse in the fuse box.
- Page 47 Troubleshooting en Fault Cause and troubleshooting Remnants of food on Washing programme selected too weak. tableware. Select a more intensive washing programme. "Programmes", Page 16 Adjust the sensitivity of the sensors. "Sensors", Page 10 Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed.
-
Page 48: Clean Wastewater Pump
en Troubleshooting Fault Cause and troubleshooting Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades are often more severely affected. Use rust-resistant tableware. Cutlery may also rust if washed together with rusting items. Do not wash rusting items. Salt content in washing water is too high. Remove any spilled special salt from the tub. -
Page 49: Transportation, Storage And Disposal
Transportation, storage and disposal en Insert the pump cover and press 19.3 Transporting the appli- down ance To avoid damage to the appliance, empty it before transporting. Note: Always transport the appliance upright to prevent residual water get- ting into the machine's controls and damaging the appliance. -
Page 50: Customer Service
en Customer Service Unplug the appliance from the Nr.), the production number (FD) and mains. the consecutive numbering (Z-Nr.) of Cut through the power cord. your appliance. Dispose of the appliance in an en- You can find the contact details for vironmentally friendly manner. -
Page 51: Technical Specifications
Technical specifications en to our instructions; this also in- If your appliance is fitted with cludes correctly fitting the Aqua- Aqua-Stop, you can in principle Stop extension (genuine access- leave your appliance unattended ory). Our guarantee does not cover during operation and the tap defective supply lines or fittings up turned on afterwards. -
Page 52: Statement Of Compliance For Great Britain
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provi- sions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at siemens- home.bsh-group.com among the additional documents on the product page for your appliance. - Page 53 Declaration of Conformity en group is seen on the title page. The The manufacturer, BSH Hausgeräte full model identifier is made up of the GmbH deems that it has complied characters before the slash in the with product number (E no.) which can be provision 5.1-1 of ETSI EN 303 found on the rating plate.
- Page 56 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...
Need help?
Do you have a question about the SR65EX09ME and is the answer not in the manual?
Questions and answers