Related Manuals for Siemens SR63EX25ME
Summary of Contents for Siemens SR63EX25ME
- Page 1 SR63EX25ME Dishwasher EN Information for Use Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
en Table of contents You can find additional information and explanations online. Scan the QR code on the title page. Table of contents Table of contents 1 Safety .......... 3 8.5 Cutlery drawer ...... 2 1 1.1 General information... -
Page 3: Safety
Safety en 14.6 Interrupting programme .. 3 1 18.1 Clean wastewater pump .. 4 6 14.7 Terminate programme ... 3 1 19 Transportation, storage and 14.8 Switching off appliance .. 3 1 disposal... -
Page 4: Restriction On User Group
en Safety ¡ in closed rooms in the home and with similar applications, e.g.: in canteens in shops, offices and other work environments; in agricultural businesses; use by customers in hotels, motels and other typical home environments; in bed and breakfasts. ¡... - Page 5 Safety en isolating switch must be integrated into the permanent electrical installation according to the installation regulations. When installing the appliance, check that the power cable is not trapped or damaged. Cutting through the supply hose or immersing the Aqua-Stop valve in water is dangerous. Never immerse the plastic housing in water.
-
Page 6: Safe Use
en Safety 1.5 Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause seri- ous harm to health. Follow the safety instructions and directions for use on the packagings of detergent and rinse aid products. -
Page 7: Damaged Appliance
Safety en Never expose the appliance to intense heat or humidity. Do not use steam- or high-pressure cleaners to clean the appli- ance. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance parts or heat sources. - Page 8 en Safety Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts. Children may become trapped in the appliance and suffocate. Use the childproof lock if fitted. Never let children play with or operate the appliance.
-
Page 9: Preventing Material Damage
Preventing material damage en Modified or damaged water hoses 2 Preventing material may result in material damage and Preventing material damage damage damage to the appliance. Never kink, crush, modify or cut 2.1 Safe installation through water hoses. Only use the water hoses supplied ATTENTION with the appliance or genuine Improper installation of the appliance... -
Page 10: Environmental Protection And Saving Energy
en Environmental protection and saving energy So as not to scratch the finish on If automatic door opening is deactiv- the appliance, do not use sponges ated, energy consumption increases with a rough surface or abrasive and the drying phase is usually cleaning agents. -
Page 11: Installing And Connecting The Appliance
Installation and connection en Quick reference guide the wastewater from being dis- charged. 4.2 Installing and connecting 4.4 Drinking water connection the appliance Connect your appliance to a drinking You can position your built-under or water connection. integrable appliance in a fitted kit- chen between wooden and plastic Installing the drinking water con- walls. -
Page 12: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. Rating plate with E number and FD number Page 48 . Rating plate The data you need for Customer Service Page 48 . -
Page 13: Controls
Familiarising yourself with your appliance en Page 38 Filter system Filter system Add the special salt to the dispenser for Dispenser for special salt special salt. "Water softening system", Page 22 During the wash cycle tablets automatically fall out of the detergent dispenser into the Tablet collecting tray tablet collecting tray where they can fully dissolve. - Page 14 en Familiarising yourself with your appliance With some buttons you can perform different functions. 3 4 5 6 Page 30 Switching on the appliance Page 31 ON/OFF button and reset Switching off the appliance button Terminating the programme Page 31 Programme buttons Programmes Page 15 ...
-
Page 15: Programmes
Programmes en Door handle 1 Open the appliance door. The display shows information about the remaining running time or the basic settings. You can change the basic set- Display tings via the display and the setting buttons. "Changing basic settings", Page 34 1 Symbols on the display Symbol... - Page 16 en Programmes 20 °E. Different influencing factors such as water temperature or pipe pressure may result in deviations. Programme Programme sequence Tableware: Intensive: Pots and pans, non-fragile Pre-Rinse Intensive 70° tableware and cutlery Cleaning 70 °C Level of soiling: Intermediate rinse Stubborn, burned or dried-on Final rinse 69 °C food remnants containing starch and protein...
-
Page 17: Information For Test Institutes
Additional functions en 6.1 Information for test insti- The tableware undergoes intermedi- ate cleaning via cold rinsing. tutes Tip: You can use the Home Connect Test institutes are provided with in- app to download additional pro- formation for comparability tests, e.g. grammes and save them to the according to EN60436. -
Page 18: Features
en Features Symbol Additional func- tion HygienePlus To ensure a higher hygiene status for the ap- pliance and tableware, the temperature is raised and maintained for an extra-long period. Especially suitable for cleaning chopping boards or baby bottles. Continuous use of this function increases the hygiene status. -
Page 19: Top Basket
Features en 8.1 Top basket Raise or lower the basket evenly to the right level. Arrange cups, glasses and small items of tableware in the top basket. Check that the basket is level on both sides. Release the levers. You can adjust the height of the top The basket clicks into position. -
Page 20: Bottom Basket
en Features 8.3 Bottom basket 8.4 Folding prongs Arrange pans and plates in the bot- Use the folding prongs to position tom basket. tableware securely, e.g. plates. Large plates up to a diameter of You can fold the prongs down to po- 31 cm can be arranged in the bottom sition pans, bowls and glasses basket as shown. -
Page 21: Cutlery Drawer
Before using for the first time en 8.5 Cutlery drawer Reorganising cutlery drawer You can fold down the folding spines Arrange cutlery in the cutlery drawer. to make more space for wider items of cutlery. To fold down the folding spines, push the lever forwards and fold down the folding spines Arrange cutlery with the points and sharp edges downwards. -
Page 22: Water Softening System
en Water softening system you operate the appliance without tank, and parts of the appliance may tableware before using it for the become blocked. first time. To ensure good dishwashing results, you can treat the water with special Tip: You can change these settings salt and the water softening system. -
Page 23: Special Salt
Water softening system en Press repeatedly until the right Do not use table salt. water hardness has been set. Add the special salt to the dis- The value H04 is set at the factory. penser. To save the settings, press for 3 seconds. The water softening system has been set. -
Page 24: Regeneration Of The Water
en Rinse aid system The water hardness is 0 - 8 °E. Regeneration of the water You do not need to use special softening system after x salt. washing programmes Press . Additional running time in To open the basic settings, press minutes for 3 seconds. -
Page 25: Setting The Amount Of Rinse
Rinse aid system en Add rinse aid up to the max mark. reduces water marks and im- proves the drying result. To save the settings, press for 3 seconds. The amount of rinse aid to be dis- pensed has been set. 11.3 Switching the rinse aid system off If you find the rinse aid refill indicator... -
Page 26: Detergent
en Detergent is non-critical if you remember the fol- 12 Detergent lowing: Detergent Only choose a programme without 12.1 Suitable detergents PreRinse. Only use detergents that are suitable Do not select timer programming for dishwashers. Both separate and for starting the programme. combined detergents are suitable. The dosage can be adjusted to the For optimum washing and drying res- level of soiling. -
Page 27: Unsuitable Detergents
Detergent en automatically to ensure the best pos- with dry hands and only ever place sible washing and drying result. them in a dry detergent dispenser. Even if the rinse aid and special 12.2 Unsuitable detergents salt refill indicators light up, wash- ing programmes will run properly Do not use detergent which could with combined detergents. -
Page 28: Tableware
en Tableware Close the lid of the detergent dis- let collecting tray and dissolve in penser. the right dosage. In order to en- sure that tablets can dissolve evenly, do not place any other ob- jects in the tablet collecting tray. Tip: If you use powder detergent and select a program with pre-rinse, you can also add a little detergent to the... -
Page 29: Arrange Tableware
Tableware en Cause Recommendation The water temperature of the pro- Select a programme with lower temper- gramme is too high. atures. After the programme has ended, take glassware and cutlery out of the appli- ance without delay. 13.2 Arrange tableware For better washing and drying res- ults, position items with curves or Arrange tableware correctly to optim- recesses at an angle so water can... -
Page 30: Removing Tableware
en Basic operation Do not place small parts in the – 14 Basic operation tablet collecting tray and do not Basic operation block it with tableware so as not 14.1 Switching on the appli- to obstruct the lid of the deter- ance gent dispenser. Press . -
Page 31: Setting Timer Programming
Basic settings en Press the button for the relevant 14.6 Interrupting programme additional function. Note: When you open the appliance "Additional functions", Page 17 door once the appliance has heated The additional function is set and up, leave the door slightly ajar for a the additional function button few minutes and then close it. -
Page 32: Overview Of The Basic Set
en Basic settings 15.1 Overview of the basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description 1 Water hardness H00 - H07 Set the water softening sys- tem to your water hardness. "Setting the water softening system", Page 22 Level H00 switches the water softening system off. - Page 33 Basic settings en Basic setting Display text Selection Description the cabinet front fitted flush. If the appliance door is not completely closed, the spot of light will flash. The pro- gramme has ended when the spot of light is no longer vis- ible on the floor.
-
Page 34: Tings
en Basic settings Basic setting Display text Selection Description This basic setting is not avail- able until you have connected the appliance with the Home Connect app. "Home Connect ", Page 35 Remote Start rc0 - rc2 Activate or deactivate . "Remote Start ", Page 35 The following settings are possible: With the setting "rc0", the... -
Page 35: Home Connect
Home Connect en Scan the following QR code. 16 Home Connect Home Connect This appliance is network-capable. Connect your appliance to a mobile device to control its functions via the Home Connect app. The Home Connect services are not available in every country. The avail- ability of the Home Connect function You can install the Home Connect depends on the availability of app and connect your appliance... -
Page 36: Smart Start
en Cleaning and servicing Tip: To deactivate the function, press Security certificate of the Wi-Fi communication module (to ensure a secure data connection). 1 16.3 Smart Start The current software and hardware version of your appliance. Smart Start automatically determines Status of any previous reset to the optimal time for the programme factory settings. -
Page 37: Cleaning Products
Tip: You can get our tested and approved Dishwasher Care and Machine Cleaner for Dishwashers online at https://www.siemens-home.bsh-group.com/ store or from customer service. Machine Care is a programme which removes various deposits in one washing cycle. -
Page 38: Filter System
en Cleaning and servicing Only use machine care products 17.5 Filter system and machine cleaners specially The filter system removes coarse designed for dishwashers. soiling from the dishwashing cycle. Make sure that there are no alu- minium parts, e.g. extractor hood grease filters or aluminium pans, in the interior of the appliance. -
Page 39: Cleaning Spray Arms
Cleaning and servicing en Pull down the micro filter to re- Insert the filter system into the ap- move. pliance and turn the coarse filter clockwise. Make sure that the arrow mark- ings match up. Press the locking catches gether and lift the coarse filter out Tip: Connect your appliance to a mo- bile device. -
Page 40: Troubleshooting
This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code on the title page and on our website siemens- home.bsh-group.com. WARNING Risk of electric shock! Improper repairs are dangerous. - Page 41 Troubleshooting en Fault Cause and troubleshooting Display "Check water A technical fault is present. supply" flashes Press . Unplug the appliance or switch off the fuse. Wait at least 2 minutes. Insert the mains plug of the appliance in a socket or switch on the fuse.
- Page 42 en Troubleshooting Fault Cause and troubleshooting E:32-00 will light up The filters in the water connection of the supply or alternately or indicator AquaStop hose are blocked. for water supply lights Switch off the appliance. Pull out the mains plug. Turn off the water tap. Unscrew the water connection.
- Page 43 Troubleshooting en Fault Cause and troubleshooting E:61-03 will light up alternately. Water is not drained. Not an appliance fault. Wastewater pump is blocked or the cover of the wastewater pump is loose. Clean the wastewater pump. "Clean wastewater pump", Page 46 Secure the cover of the wastewater pump so it clicks into position.
- Page 44 en Troubleshooting Fault Cause and troubleshooting All LEDs lit up or Electronics have detected a fault. flashing. Press the main switch button for approx. 4 seconds. "Controls", Page 13 The appliance is reset and restarted. If the problem occurs again: Switch off the appliance. Pull out the mains plug or switch off the fuse in the fuse box.
- Page 45 Troubleshooting en Fault Cause and troubleshooting Remnants of food on Washing programme selected too weak. tableware. Select a more intensive washing programme. "Programmes", Page 15 Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed. Only remove large remnants of food and do not prerinse tableware.
-
Page 46: Clean Wastewater Pump
en Troubleshooting Fault Cause and troubleshooting Rust spots on cutlery. Cutlery may also rust if washed together with rusting items. Do not wash rusting items. Salt content in washing water is too high. Remove any spilled special salt from the tub. Screw the cap of the special salt dispenser on tight. -
Page 47: Transportation, Storage And Disposal
Transportation, storage and disposal en Insert the pump cover and press 19.3 Transporting the appli- down ance To avoid damage to the appliance, empty it before transporting. Note: Always transport the appliance upright to prevent residual water get- ting into the machine's controls and damaging the appliance. -
Page 48: Customer Service
en Customer Service Unplug the appliance from the Nr.), the production number (FD) and mains. the consecutive numbering (Z-Nr.) of Cut through the power cord. your appliance. Dispose of the appliance in an en- You can find the contact details for vironmentally friendly manner. -
Page 49: Technical Specifications
Technical specifications en to our instructions; this also in- If your appliance is fitted with cludes correctly fitting the Aqua- Aqua-Stop, you can in principle Stop extension (genuine access- leave your appliance unattended ory). Our guarantee does not cover during operation and the tap defective supply lines or fittings up turned on afterwards. -
Page 50: Statement Of Compliance For Great Britain
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provi- sions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at siemens- home.bsh-group.com among the additional documents on the product page for your appliance. - Page 51 Declaration of Conformity en group is seen on the title page. The The manufacturer, BSH Hausgeräte full model identifier is made up of the GmbH deems that it has complied characters before the slash in the with product number (E no.) which can be provision 5.1-1 of ETSI EN 303 found on the rating plate.
- Page 52 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...
Need help?
Do you have a question about the SR63EX25ME and is the answer not in the manual?
Questions and answers