NUTRIBULLET COMBO Manual
Also See for COMBO:

Advertisement

NUTRIBULLET COMBO Manual

Overview

Overview

Introduction

We're thrilled you've chosen to optimize your health and vitality. Since we want your experience with NutriBullet to be fantastic, please read the safety and cleaning instructions manual before use. Follow the steps in this Quick Guide to prepare delicious smoothies, cocktails, warm soup, (pasta) sauces etc. Enjoy!
Welcome to visit www.NutriLiving.shop
For original NutriBullets & accessories, recipes, warranty, FAQ's etc.
Happy with your NutriBullet?
Share your recipes, posts, tips & tricks! Like & follow us

Pitcher use, for warm servings

  1. Add ingredients and make sure they do not exceed their respective MAX line (higher line for solid ingredients; lower line for liquids).
  2. Attach the lid with vented lid cap on the pitcher and make sure it's aligned to the handle.
  3. Place the pitcher onto the motor base — handle facing to the right of the control panel, never towards the back — and gently twist clockwise. When you hear the click, it's locked and ready to blend. Left-handed? Place the handle facing towards the center of the blending control panel and twist clockwise.
  4. Plug the power cord into an electrical outlet and press POWER to turn on the blender.
  5. To start blending, select a speed, the EXTRACT or PULSE program.
  6. If ingredients stick to the side, press POWER and wait for the blade to stop turning. Remove the pitcher lid and use the tamper to dislodge the ingredients. When done, replace the lid and continue blending. If the ingredients continue to stick, consider adding more liquid.

NOTE: To add additional ingredients in de meantime, switch the setting to LOW, remove the vented lid cap from the pitcher lid. Add ingredients through the hole, use the tamper if necessary. Replace the vented lid cap and increase to your desired speed. DO NOT attempt to add items through the vent hole when blending hot ingredients.

  1. Reached your desired consistency? Stop the appliance by pressing POWER or the speed you have selected. Wait for the blades to stop turning. To turn off the unit completely press POWER again.
  2. Twist the pitcher counterclockwise and lift off the motor base. Pour and enjoy!

NutriBullet® cups, for cold servings

  1. Add ingredients. Do not overfill. To avoid leakage, do not add ingredients beyond the MAX line.
  2. Twist the blade onto the cup until tightly sealed.
  3. Plug the power cord into an electrical outlet and press POWER to turn on the blender.
  4. Turn the cup upside down and place it onto the motor base, gently turning the cup clockwise to lock.
  5. To start blending, select a speed or the EXTRACT program.
  1. When you have reached your desired consistency, pause/stop the appliance by pressing POWER or the speed you selected and wait for the blades to stop turning. The unit will enter idle-mode. The POWER button will remain illuminated.
    NOTE: speeds will automatically shut off after 60 seconds. Press POWER to turn off the unit completely.
  2. Unlock the assembly by gently twisting the cup counterclockwise. You will hear a click. Lift off the cup from the motor base end enjoy!

NOTE
Never wash your blades in the dishwasher (too hot) and never remove the gasket.
Do not use your NutriBullet, its parts and accessories in the microwave or freezer.
To maintain optimum performance please replace the blade every six months, or earlier as needed.

Blending control panel

Blending control panel

TURNING ON/OFF
The power button actuates the master power of the appliance. When pressed, this button lights up to indicate the motor is powered on, and the other functions can be used. Always turn the master power off and unplug the unit when the machine is not in use.

LOW SPEED
Use to mix thin batter, gravies, marinades; scramble eggs; process cooked foods and uncooked fruits.

MEDIUM SPEED
Use to cream soups, mix dips, grind nuts, and to blend sauces, spreads, mixed & powdered drinks and milkshakes.

HIGH SPEED
Use to liquefy thick mixtures and blend frozen fruits and vegetables.

EXTRACT PROGRAM
Press the EXTRACT button to break down whole fruits, vegetables, and ice into nutrient-rich smoothies. This button will activate a run cycle that shuts off automatically. To pause or stop the blender, press EXTRACT again or POWER .

PULSE
Use to control chopping and processing.
Press and release the PULSE button to chop ingredients. If you hold this button down, it will continue to run until you release it.

DO NOT use this setting with hot ingredients!

LOW, MEDIUM OR HIGH
Select a speed and press once to turn on. The button will illuminate. To pause/stop the unit, press the button a second time — it will deilluminate — or press POWER .
While in the idle-mode, the POWER button will remain lit. To fully power down after pausing, press POWER and unplug the unit.
NOTE: If using the pitcher, speeds will run until paused/stopped. If using the NutriBullet® cups, speeds will automatically shut off after 60 seconds.

ALWAYS ADD LIQUID
The cyclonic action® of your NutriBullet® requires the use of liquids to make smoothies and other nutritious items. The NutriBullet® is not intended to be used without liquids, or as an ice crusher.

REFER A FRIEND - GIVE 10% GET 10%
Spread the news how much fun & benefit your NutriBullet is giving you. Surprise a friend by giving a 10% discount to buy a NutriBullet with the code 4MYFRIEND10. To thank we offer you a 10% discount with the code THANKU10.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download NUTRIBULLET COMBO Manual

Advertisement

Need help?

Need help?

Do you have a question about the COMBO and is the answer not in the manual?

Questions and answers

Table of Contents