InStyler WET to DRY MAX Manual

INTRODUCTION & GETTING STARTED

You can now skip blow drying your hair and still get that amazing blowout look that you could never get with any other styling tool. The MAX Wet to Dry dries hair by whisking water out of the hair strands, and then as the water travels up the rotating barrel, it is vented away safely and quickly. It does this as you style resulting in significantly less styling time!

TOP 4 THINGS YOU MUST KNOW ABOUT YOUR MAX WET TO DRY

1. Towel Dry. Try to get your hair as dry as possible with a towel before you begin.
2. One to Dry and One to Style. Glide the MAX Wet to Dry SLOWLY down your hair once to dry and once to style.
3. Go Slowly! The MAX Wet to Dry works best if you glide it through your hair slowly. Repeated passes should be unnecessary if you proceed slowly
4. Listen for the Crackle! If you hear a little crackling, that means the moisture is evaporating properly from the barrel and not in your hair.

For video tips visit YOUTUBE.COM/INSTYLERHAIR

2-WAY ROTATION

Double-Click
Close your MAX Wet to Dry twice quickly to change the rotation direction for MAXIMUM performance when styling.

MAX Wet to Dry's motorized barrel works rotating in either direction but for MAXIMUM RESULTS make sure the barrel rotates in the natural direction toward the ends of your hair.

FEATURES

MULTIPLE HEAT SETTINGS

Go to youtube.com/instylerhair for video tips

Towel Dry the hair thoroughly first. Hair can then be styled as normal on the appropriate heat setting while still damp.

• The unit will start on "MAX".
• Press the Power button to reduce heat.
• The LED bars will flash while heating up; once temperature is achieved, the LED bars will stay lit.

REMOVABLE COOL TIP

Attaching and Removing the Cool Tip for Extra Fine Control and Comfort

1. First, make sure the barrel is cool.
2. Insert the post of the Cool Tip into the hole on the end of the barrel and push until seated.
3. To remove the Cool Tip, wait until the unit is fully cool, then grasp the Cool Tip with fingers and pull to remove.

The unit operates with or without the cool tip, whichever you prefer.

SAFETY FIRST

Using Your Thermal Guard
NOTE: It is recommended that you use your MAX Wet to Dry with the included Thermal Guard Training Aid, to help prevent burns while you get used to this hot new styling tool.

Attaching Your Thermal Guard Training Aid

1. Before attaching the Thermal Guard, make sure the barrel of the unit is cool to the touch.
2. To attach, snap the Thermal Guard Training Aid onto the side of the unit, directly under the ring, below the barrel.
3. Rotate the Thermal Guard Training Aid until tabs are snapped into the indentations on the body of the device.
4. Once the Thermal Guard is snapped in place, you can use your MAX Wet to Dry as you normally would.

Removing Your Thermal Guard Training Aid

5. Before removing the Thermal Guard, make sure the barrel is no longer hot.
6. To remove the Thermal Guard Training Aid, make sure the barrel of the unit is cool, then fi rmly grab the guard piece. Twist to release it and pull to remove.

NOTE: It is important to keep your MAX Wet to Dry clean, as hair product buildup can accumulate on the barrel and bristles. With the unit unplugged and cool, wipe the outside surface only with a lightly dampened cloth. The bristles can be lightly scrubbed if necessary. Make sure the MAX Wet to Dry is completely dry before plugging into power source. Please see this manual for more detailed cleaning instructions.
Always allow the MAX Wet to Dry to cool before storing.

THE BASICS

Preparation For All Hair Types

• Before using your MAX Wet to Dry, you should always start withclean, dry hair.
• Detangle and comb.
• Start with 1-inch to 3-inch sections. Make sure the section is no wider than the length of the MAX Wet to Dry barrel.
• Style the under layers of your hair first. Then, move onto the top layers.
• Use anysalon-quality styling product with your MAX Wet to Dry. However, we do not recommend the use of oilbased products with the device.
• For better hold, you can use your favor-ite light styling spray before using your MAX Wet to Dry. Do not use an aerosol spray.
• GO SLOWLY! The most important lesson is to glide the MAX Wet to Dry slowly. Don't worry if you see "steam" coming off of your hair when using your MAX Wet to Dry. This is not the result of any damage to the hair, it is simply excess moisture that is evaporating.

HAIR TYPES

The way you use your MAX Wet to Dry depends on what type of hair you have. Use the techniques best suited to your hair type.
The four hair types are:

1. FINE: Set the MAX Wet to Dry at the Low or Medium heat setting. With fine hair, you should only need 1 to 2 passes to achieve preferred results.
2. MEDIUM (most common): Set your MAX Wet to Dry to the Medium or High setting. You should only need 1 to 2 passes with the MAX Wet to Dry for your desired look.
3. THICK: Set your MAX Wet to Dry to the High or Max heat setting. With thick hair, 2 or 3 passes should be enough to set your style.
4. WET HAIR (towel dry) - For wet hair, use the appropriate heat setting to dry while styling.

SECTIONING HAIR

To achieve the style you want with your MAX Wet to Dry, it is important to know how to properly section the hair.

• With longer hair, clip up the top layers and begin sectioning and styling the under layers first.
• For best results, do not use fingers to gather each section of hair. You can gather a much "cleaner" section with a sectioning comb.
• Start with 1-inch to 3-inch sections, working around each side of the head to the nape of the neck. Usesmall sections of hair.
• When using the MAX Wet to Dry, grip the device firmly but not tightly and let your hair glide through.Go slowly and let the MAX Wet to Dry do the work.
• For straightening damp hair, glide the MAX Wet to Dry once to dry, then once more to straighten.

NOTE: For color-treated hair, we recommend both a lightweight shampoo and leave-in conditioner.

• Volumizing products can be used to set the style.
• To hold your look, end with a light, professional finishing spray.
• Although the MAX Wet to Dry uses less heat than other hair appliances, we recommend using thermal protectant products before use.

STRAIGHTENING

• Position the MAX Wet to Dry with the rotating barrel as close to roots as possible (with the barrel underneath the section of the hair).
• Ensure the barrel is always rotating toward the end of your hair.
• Pull the MAX Wet to Dry straight downSLOWLY to the ends.
• Go slowly to allow the MAX Wet to Dry enough time to be able to dry and style at the same time. For straightening damp hair, glide the MAX Wet to Dry once to dry, then once more to straighten.

STRAIGHTENING AT THE ROOT

• Open the MAX Wet to Dry and hold the barrel against sectioned hair near the scalp. DO NOT CLOSE MAX Wet to Dry over hair.
• Slide the MAX Wet to Dry back and forth -without rotating - against the roots for 3 to 5 seconds before releasing and moving onto the next section. Use caution to avoid burning your scalp.

DON'T RUSH!
Take your time and move slowly through the hair.

SOFT CURLS

VOLUME BOOST

• Position the MAX Wet to Dry so the rotating barrel side is as close to roots as possible (with the barrel underneath the section of the hair).
  For volume that is sleek and fi nished the barrel should be rotating back toward the ends of the hair.
  
• For max volume that is similar to backcombing and back-teasing the barrel should be rotating forward (toward the root of the hair).
  
• Allow the barrel to rotate for 3-5 seconds in place at the roots before pulling the MAX Wet to Dry down through to your ends.

FLIP UNDER

• Position the MAX Wet to Dry so the rotating barrel side is as close to roots as possible (with the barrel underneath the section of the hair).
• Ensure the barrel is always rotating toward the end of your hair.
  
• Pull the MAX Wet to Dry straight down SLOWLY to the ends.
• Near the ends of the hair, rotate your wrist so the ends of your hair curl in toward your face.
• Allow the barrel to rotate for 3-5 seconds in place before releasing the hair.
  

FLIP OUT

• Position the MAX Wet to Dry so the rotating barrel side is as close to roots as possible (with the barrel on top the section of the hair).
• Ensure the barrel is always rotating toward the end of your hair.
  
• Pull the MAX Wet to Dry straight downSLOWLY to the ends.
  
• Near the ends of the hair, rotate your wrist so the ends of your hair curl up and away from your face.
• Allow the barrel to rotate for 3-5 seconds in place before releasing the hair.

ADVANCED TIPS

To create extra body and volume using the MAX Wet to Dry:
With the MAX Wet to Dry barrel facing toward the back of your head, close the device onto sectioned hair and slowly pull the MAX Wet to Dry in the opposite direction of where you want your hair to lay. In other words, close the MAX Wet to Dry on a section of hair at the crown of the head and pull forward slowly, toward the forehead.
To boost the volume on the sides and back of the head, gather a small section of hair and push the MAX Wet to Dry upward, toward the ends of the section. This technique gives extra body in the root area, giving hair a fuller appearance. This technique can be used anywhere you need extra body, volume or height.
For additional height in your bangs, wrap the bangs around the barrel, toward your face, and let the MAX Wet to Dry rotate for a few seconds toward your face. Open the barrel and allow bangs to gently fall from the barrel.

FREQUENTLY ASKED QUESTIONS

How do I use the MAX Wet to Dry, compared to my flat iron?
The technique is similar in that you put your hair into the MAX Wet to Dry, close it onto the hair and then slowly work your way through the length of your hair. But that's where the similarities end! The rotating, heated, ceramic barrel and wet-to-dry bristles will do most of the work for you. Plus, you'll find that you can do much, much more with your MAX Wet to Dry than you could ever do with a flat iron.

How is the MAX Wet to Dry MAX different from the InStyler Original Rotating Iron?
We took a great product and made it even better! The InStyler Original Rotating Iron has been improved with new features like a 2-way rotating barrel, a fourth higher heat setting, an upgraded Ceramic Tourmaline and Titanium rotating barrel, exclusive wet-to-dry bristles and 20% increased barrel RPM speed. Not only that, but now that MAX Wet to Dry can be used on damp hair for faster styling time. The Thermal Guard Training Aid and Cool Tip are upgraded features for additional comfort and safety.

My hair is coming out frizzy when I use my MAX Wet to Dry. What am I doing wrong?
Go Slowly. Make sure hair is combed and detangled to start. Position the MAX Wet to Dry so that the barrel rotates toward the natural direction of hair. Also, try to put as little tension on the barrel as possible. This will help keep frizz to a minimum.

Does the MAX Wet to Dry work on natural African-American hair?
Absolutely! The MAX Wet to Dry is a great appliance for African-American hair because it won't leave crease marks like flat irons do, and the ceramic polishing barrel and bristles will leave the hair looking shiny and beautiful. The MAX Wet to Dry is safe for any type of hair when used properly. You will get best results if your hair is dry, combed and detangled.

Can I use styling products before or after I use my MAX Wet to Dry?
You can use any salon-quality product with your MAX Wet to Dry, although we don't recommend any oil-based products on the hair beforehand. A professional thermal protectant spray can be applied to the hair before you style. Professional quality hold and styling sprays will help keep your style in place.

Can I use the MAX Wet to Dry on already dry hair?
Of course! In fact, you may get even better results.

The MAX Wet to Dry doesn't seem to be working on my ends. Am I doing something wrong?
If you're having trouble styling the ends, try holding the MAX Wet to Dry on your ends for a few seconds longer. The ends of the hair are normally the driest part of the hair, and can be a bit more difficult to set. It helps to use a good conditioner, especially on the ends, to help infuse moisture into the hair shaft.

I see smoke coming from my hair! Is it burning my hair?
No! The MAX Wet to Dry is not burning your hair! This is just a by-product of the evaporation.

Can I use my MAX Wet to Dry with real human hair extensions?
Yes. Make sure you start working with the MAX Wet to Dry below where the extension is attached. Do not drag the MAX Wet to Dry through the hair with any pressure, as you may inadvertently pull out the extension. NEVER use your MAX Wet to Dry with synthetic hair.

How does the MAX Wet to Dry work?

The MAX Wet to Dry dries hair by whisking water out of the hair strands. As the water travels up the rotating barrel, it is vented away safely and quickly. It does this as you style, resulting in significantly less styling time.

I need a lot of heat to straighten my hair. Will the MAX Wet to Dry get hot enough?
We get asked this question a lot and we're proud to say you can add this one to the old "hair styling myths" column! With the MAX Wet to Dry, you don't need a lot of heat to straighten and style your hair! The MAX Wet to Dry's unique design actually allows you to use less damaging heat than you would with a flat iron or other hot tool. It's a totally new way of thinking about heat styling - you don't need extreme heat to get the results you want!

Can I use the MAX Wet to Dry to curl my hair?
Absolutely! Simply by wrapping your hair around the rotating, heated, polishing barrel, and closing the MAX Wet to Dry gently, you can create loads of luxurious curls.

The heated polishing barrel rotates. Can my hair get tangled?
No. Unlike some of our competitors' products, the surface of the MAX Wet to Dry is a single piece and totally smooth, so there is no way for your hair to get caught.

How do I get my MAX Wet to Dry to rotate?
Close the handle to start rotation, which will begin automatically.

How do I get my MAX Wet to Dry to change it's rotation direction?
Close the MAX Wet to Dry twice quickly and the barrel will automatically begin rotating in the opposite direction. See detailed instructions.

What if my MAX Wet to Dry does not heat?
Check to make sure your MAX Wet to Dry is plugged in and press the Power button. The LED bars should light and begin flashing. Once the LED lights remain lit, the MAX Wet to Dry will be at the set temperature and ready to use.

When I use my MAX Wet to Dry, why does the temperature LED start to flash?
It is normal for the heat to fluctuate during use. As long as the MAX Wet to Dry has been allowed to reach full heat (steady LED) after powering on, you can continue to use your appliance while the LED is flashing.

How do I clean my MAX Wet to Dry?

When cleaning your MAX Wet to Dry, disconnect it from the power source and make sure it has completely cooled. Wipe the outside surface only with a soft, damp cloth. Be sure to wring out excess water before applying it to the unit. Clean more severe dirt by using a soft, damp cloth with a mild soap. The bristles can be lightly scrubbed if necessary with a damp cloth, to remove any built-up product. Residual hair left in the bristles should be removed. The barrel can be wiped down with a soft, damp cloth. Use a mild soap if necessary. Make sure the MAX Wet to Dry is completely dry before plugging it into a power source.

MAINTENANCE

Your MAX Wet to Dry is essentially maintenance free. No lubrication is needed. Keep all openings clear of grime and dirt. If cleaning is necessary, unplug the unit from the power source and wait for the unit to completely cool. Wipe the exterior of the unit with a cloth. Do not attempt any repairs. If a repair is required, unplug the unit, allow it to cool, and return it for repair to authorized service representative.

STORAGE

To store your MAX Wet to Dry, unplug and wait for it to fully cool. Store out of the reach of children and in a safe and dry location. Do not pull on cord at electrical source or wrap cord around the unit.

Get even more tips & tricks on our website and social sites!
Share your videos, tips, questions with other MAX Wet to Dry fans!
instylerus
instylerhair
instylerhair
instylerhair
www.youtube.com/instylerhair
Voltage: 120V/60Hz, Power: 60W

IMPORTANT SAFETY INFORMATION

TO REDUCE THE RISK OF SERIOUS INJURY, READ ALL INSTRUCTIONS AND WARNINGS COMPLETELY BEFORE USING THIS PRODUCT.
The InStyler MAX Wet to Dry has been carefully engineered for both effectiveness and safety. However, basic safety precautions should always be followed when using any device, especially when children are present.

The power cord on this product contains lead, a chemical known to the State of California to cause [cancer, and] birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.

• MAX WET TO DRY IS NOT INTENDED FOR USE BY CHILDREN.
• KEEP AWAY FROM WATER.
• 
  As with most electrical appliances, electric parts are live even when the switch is off. To reduce the risk of electric shock:

1. ALWAYS UNPLUG UNIT IMMEDIATELY AFTER USE.
2. DO NOT use while bathing or showering.
3. DO NOT place or store the MAX Wet to Dry where it can fall or be pulled into a tub, toilet or sink, or any other water source.
4. DO NOT use MAX Wet to Dry near water.
5. DO NOT place or drop into water or other liquid.
6. If the MAX Wet to Dry falls into water,DO NOT REACH INTO THE WATER! Unplug device immediately.
7. Unplug this appliance before cleaning it.
   
   TO REDUCE THE RISK OF BURNS, FIRES, ELECTRICAL SHOCK, DEATH, INJURY OR DAMAGE TO PROPERTY:

8. Counterfeit versions of the MAX Wet to Dry do exist. To ensure you have purchased a genuine product and to reduce the risk of burns, electrical shock and malfunctions, purchase from authorized dealers only.
9. Use MAX Wet to Dry only for its intended purpose as described in this manual.DO NOT use attachments not recommended by the manufacturer.
10. NEVER operate the MAX Wet to Dry if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it has been dropped in water. If the power supply cord or plug is damaged, the MAX Wet to Dry must be replaced by the manufacturer or an authorized service agent in order to avoid a hazard.
11. Keep this product and the cord away from water and heated surfaces.DO NOT wrap the cord around the MAX Wet to Dry until it is completely cool.
12. This product has moving parts. Children and pets should be kept away when product is in use.
13. The MAX Wet to Dry shouldNEVER be left unattended when plugged in.
14. NEVER use while sleeping.
15. NEVER drop or insert any object into any opening or hole on the MAX Wet to Dry.
16. DO NOT operate outdoors or where aerosol (spray) products are being used or where oxygen is being administered.
17. DO NOT use an extension cord with the MAX Wet to Dry.
18. The MAX Wet to Dry barrel and unit bottom may be hot during use.DO NOT allow eyes or skin to touch the heated surfaces.
19. DO NOT place the MAX Wet to Dry on any unprotected surface while it is operating or cooling down after use, except for the MAX Wet to Dry mat, which has been provided.
20. DO NOT lay the MAX Wet to Dry with the brush or barrel-side down. The MAX Wet to Dry has built-in safety nibs, designed to elevate the heated elements off of surfaces. When in use, the MAX Wet to Dry should always be placed with these safety nibs down.
21. DO NOT operate with a voltage converter.
22. This product is designed for hair styling.DO NOT use for any other purpose.
23. This product is a personal care device and isNOT intended for commercial use.
24. DO NOT use this product if any parts become damaged. Inspect the MAX Wet to Dry prior to beginning hair styling to ensure all parts are secure in their place.
25. DO NOT subject this product to excessive force or shock that may result in malfunction, shorter lifespan or distorted parts.
26. DO NOT tamper with this product's components. Doing so may cause unnecessary damage. This product contains no userserviceable parts.
27. DO NOT use liquid cleaners, aerosol cleaners or any cleaner containing alcohol, detergent, abrasive or corrosive materials.
28. The MAX Wet to Dry should be used only on clean hair.
29. DO NOT use the MAX Wet to Dry if you are 12 years old or younger.
30. The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a person responsible for their safety.
31. Children should be supervised to ensure that they do not play with the appliance.
32. If the supply cord is damaged, it must be replaced by manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
33. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.