Download Print this page

InStyler Cerasilk Manual

Woven ceramic curling iron

Advertisement

Quick Links

Woven Ceramic Curling Iron
PATENTED COOL TOUCH
GRIP TIP WITH SILICONE
BRISTLES
1" CERASILK BARREL
PROFESSIONAL CERAMIC
HEATERS
LED TEMPERATURE
INDICATOR LIGHTS
POWER BUTTON
AUTOMATIC SHUT OFF
DIGITAL TEMPERATURE
CONTROL
8' PROFESSIONAL SWIVEL
CORD
DIRECTIONS
To turn the device on, plug it into an electrical outlet and press the Power Button
until the LED Temperature Indicator Lights are illuminated. CERASILK will always
turn on to the 400°F setting. Press the Power Button again to select the desired
temperature as indicated by the LED Temperature Indicator Lights. Keep
pressing the Power Button to cycle through the adjustable temperature settings.
The lights will flash until the selected temperature is achieved.
The CERASILK Woven Ceramic Curling Iron has 4 Heat Settings: 300°F, 350°F,
375°F, 400°F. The tool is on the Max temperature setting when all of the LED
Temperature Indicator Lights are lit.
Recommended temperatures by hair type:
HAIR TYPE
SETTING
thick, coarse, curly
High/Max
normal, medium, wavy
Medium/High
fine, thin
Low
To use the patented cool touch grip tip, take a one inch section of hair and hold
it out to the side. Take the curling iron and insert the hair at mid-shaft into the
silicone bristles. Slide the tip of the iron down the hair section to the desired
position, then twirl it towards the root and hold it for several seconds until the
style is set. You can place your free hand on the tool tip for more control while
styling. When ready, for a tighter curl either unwind and remove the hair from
the silicone bristles, or remove the hair from the silicone bristles and then let the
curl drop. Pulling the iron down to loosen the hair from the bristles will create a
more undone look.
When you are done using the tool, press the Power Button until all of the LED
lights are off. If you forget to turn off your CERASILK Woven Ceramic Curling Iron,
the Automatic Shut Off will turn the device off after 60 minutes. To reactivate the
device, press the Power Button.
SAVE THESE INSTRUCTIONS
TEMPERATURE
375°F - 400°F
350°F - 375°F
300°F

Advertisement

loading
Need help?

Need help?

Do you have a question about the Cerasilk and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for InStyler Cerasilk

  • Page 1 When you are done using the tool, press the Power Button until all of the LED lights are off. If you forget to turn off your CERASILK Woven Ceramic Curling Iron, the Automatic Shut Off will turn the device off after 60 minutes. To reactivate the AUTOMATIC SHUT OFF device, press the Power Button.
  • Page 2 USING. KEEP AWAY FROM WATER. Never operate this appliance if will repair or replace, on its own accord, any InStyler® CERASILK Woven Ceramic it has a damaged cord or plug, Curling Iron or parts found to be defective. This warranty does not cover any...