Page 1
SN95EX12CG Dishwasher EN Information for Use Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
en Table of contents You can find additional information and explanations online. Scan the QR code on the title page. Table of contents Table of contents 1 Safety .......... 3 9.1 Top basket ......... 2 0 1.1 General information...
en Safety 1.2 Intended use Only use this appliance: ¡ For cleaning household tableware. ¡ in closed rooms in the home and with similar applications, e.g.: in canteens in shops, offices and other work environments; in agricultural businesses; use by customers in hotels, motels and other typical home environments;...
Page 5
Safety en When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an isolating switch must be integrated into the permanent electrical installation according to the installation regulations. When installing the appliance, check that the power cable is not trapped or damaged.
en Safety WARNING ‒ Risk of tipping! Improper installation may cause the appliance to tip up. Only install built-under or integrable appliances under a continu- ous worktop that is securely connected to adjacent cabinets. 1.5 Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause seri- ous harm to health.
Safety en WARNING ‒ Risk of scalding! If you open the appliance door while the programme is running, hot water may splash out of the appliance. Open the appliance door carefully if the programme is still run- ning. WARNING ‒ Risk of electric shock! An ingress of moisture can cause an electric shock. Only use the appliance in enclosed spaces.
en Safety 1.7 Risk to children WARNING ‒ Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from children. Do not let children play with packaging material. Children may breathe in or swallow small parts, causing them to suffocate.
Preventing material damage en 1.8 Safety systems Protect children from possible hazards resulting from the appli- ance. Page 10 . The appliance is equipped with a Childproof lock these pipes, possibly causing them 2 Preventing material to leak. Preventing material damage damage Check that there is a distance of at least 5 cm between the appliance 2.1 Safe installation and the water pipe.
en Childproof lock Special salt for dishwashers can WARNING damage the tub due to corrosion. Risk of suffocation! To make sure that any special salt Children may become trapped in the that escapes is washed out of the appliance and thus suffocate. tub, add the special salt to the dis- Activate the electric childproof lock penser for special salt immediately...
Installation and connection en 4.3 Sensors sures a particularly economical dry- ing result. The sensors adjust the programme For best drying results wait until the sequence and strength in the auto- end of programme before unloading matic programmes depending on the the tableware. The programme has level and type of soiling.
en Installation and connection Installation material Connect the wastewater hose to Steam protection the outlet connection of the siphon 1 Salt filling aid funnel using the enclosed parts. Mains cable When doing so, check that the Quick reference guide wastewater hose is not kinked, crushed or twisted.
Familiarising yourself with your appliance en Insert the non-heating appliance Insert the mains plug of the appli- plug of the power cable into the ance's power cable in a socket appliance. nearby. The connection data of the appli- ance can be found on the rating plate.
Page 14
en Familiarising yourself with your appliance Rating plate with E number and FD number Page 53 . Rating plate The data you need for Customer Service Page 53 . Add detergent to the detergent dispenser. Detergent dispenser "Detergent", Page 27 Page 21 Bottom basket Bottom basket ...
Familiarising yourself with your appliance en 6.2 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. With some buttons you can perform different functions. 3 4 5 6 7 Page 32 Switching on the appliance ...
Programmes en 7 Programmes Programmes You can find an overview of the programmes that can be selected here. Differ- ent programmes, which can be found on the control panel of your appliance, are available depending on the appliance configuration. The running time may vary depending on the programme selected. The running time depends on the water temperature, the quantity of tableware, the level of Page 19 selected.
Additional functions en Press for 3 seconds. Tip: To reset the programme to the The selected programme and the pre-rinse programme stored at the 1 additional function will flash. factory, use the Home Connect app flashes. or reset your appliance to the factory The programme and the additional settings.
en Features Press in the levers on the right and 9 Features left on the outside of the basket. Features You can find an overview of the pos- sible features of your appliance and how to use them here. These features depend on the model of your appliance.
Features en or for large items of cutlery, e.g. Set the slider to ON or OFF. cooking spoons or serving cutlery. Push in the top basket. If you do not need the cutlery shelf, 9.4 Bottom basket you can fold it up. Arrange pans and plates in the bot- tom basket.
en Features 9.5 Folding prongs Push the lever forwards and fold down the prongs Use the folding prongs to position tableware securely, e.g. plates. To use the prongs again, fold them back up. The prongs audibly click into posi- You can fold the prongs down to po- tion.
Before using for the first time en Start the Programme with the 10 Before using for the highest cleaning temperature Before using for the first time first time Page 33 without tableware. To remove any marks from water 10.1 Performing the initial con- or other residues, we recommend figuration you operate the appliance without...
en Water softening system Note: Set the water hardness determ- hardness. The higher the water hard- ined on your appliance. ness, the greater the consumption of "Setting the water softening sys- special salt. tem", Page 24 ATTENTION With a water hardness of 0 - 8 °E Detergent may damage the water you can dispense with special salt for softening system.
Water softening system en Place the lid back on the dis- water softening system to the right penser and turn to close. water hardness again. "Setting the water softening sys- 11.4 Switching off the water tem", Page 24 softening system 11.5 Regeneration of the water If you find the special salt refill indic- softening system ator irritating, e.g.
en Rinse aid system 12.2 Setting the amount of 12 Rinse aid system rinse aid Rinse aid system 12.1 Rinse aid If there are streaks or water marks on tableware, change the amount of For optimum drying results, use rinse rinse aid. aid. Only use rinse aid for domestic dish- Press .
Detergent en Press repeatedly until the Tabs display shows the value r:05 set at Tabs are suitable for all cleaning the factory. functions and do not need to be Press repeatedly until the measured out. display shows r:00. With shorter programmes tabs some- To save the settings, press times do not dissolve entirely and for 3 seconds.
en Detergent Combined detergent 13.3 Information on detergents Besides conventional separate deter- Follow the instructions on detergents gents, a number of products are in everyday use. available with additional functions. Detergents marked as "organic" or These products contain not only de- "ecological" (environmentally tergent but also rinse aid and salt re- friendly) generally contain lower placement substances (3in1) and,...
Tableware en Add the detergent to the dry deter- Close the lid of the detergent dis- gent dispenser. penser. If you are using tablets, one is The lid clicks into position. enough. Insert the tablets in a hori- The detergent dispenser will open zontal position.
en Tableware Cause Recommendation The following tableware is not dish- Only put tableware in the dishwasher if washer-safe: it is marked as dishwasher-safe by the Items of cutlery and tableware manufacturer. made from wood Decorated glassware, antique and hand-crafted tableware Plastic parts not resistant to heat Tableware made from copper or tin Tableware soiled with ash, wax, lub- ricating grease or paint...
Tableware en To save energy and water, load Do not block the spray arms - – the machine with the number of make sure that they can turn place settings specified (standard freely. load with tableware and cutlery). Arrange the cutlery drawer so –...
en Basic operation To prevent water dripping on the 15.3 Setting a programme tableware, unload it starting at the To adjust the washing programme to bottom and working up. the soiling level of the tableware, se- Check the washing tank and ac- lect a suitable programme.
Basic settings en 15.6 Starting the programme Press . The programme is saved and the Press appliance switches off. The programme has ended when Press to resume the pro- the display shows "00h:00m". gramme. Notes Close the appliance door. If you want to add more tableware while the appliance is running, do 15.8 Terminate programme not use the tablet collecting tray as...
Page 34
en Basic settings Basic setting Display text Selection Description Water hardness H:04 1 H:00 - H:07 Set the water softening sys- tem to your water hardness. "Setting the water softening system", Page 24 Level H:00 switches the water softening system off. 1 Rinse aid dis- r:05 ...
Page 35
Basic settings en Basic setting Display text Selection Description With the setting "EL:00"m the interior light is switched off. With the setting "EL:01", the interior light can be ac- tivated via the ON/OFF button. With the setting "EL:02", the interior light goes on when you open the appli- ance door.
Page 36
en Basic settings Basic setting Display text Selection Description With the setting "SP:00", the last programme selec- ted is set by default when the appliance is switched With the setting "SP:01", the Eco 50° programme is set by default when the ap- pliance is switched on.
Page 37
Basic settings en Basic setting Display text Selection Description Door opening c:00 1 c:00 - c:03 Electric door opening is ac- tivated with the setting "c:00". You open the appli- ance door by pressing on the upper middle section of the appliance door once. The electric childproof lock is activated with the setting "c:01".
Page 38
en Basic settings Basic setting Display text Selection Description The following settings are possible: With the setting "o:00" automatic door opening is deactivated in all pro- grammes. With the setting "o:01" automatic door opening is activated in all pro- grammes. With the setting "o:02" automatic door opening is activated only in the Eco 50°C programme.
Home Connect en Basic setting Display text Selection Description nected the device with the Home Connect app. "Home Connect ", Page 39 Factory setting Start with Restore changed settings to Y:ES the factory settings. Confirm with The settings for initial start-up must be configured. 16.2 Changing basic settings The Home Connect services are not available in every country.
en Home Connect Scan the following QR code. Tip: To deactivate the function, press 1 17.3 Smart Start Smart Start automatically determines the optimal time for the programme to start. You can use the Home Connect app to activate or deactivate the function. You can install the Home Connect app and connect your appliance Activating Smart Start via the QR code.
Tip: You can get our tested and approved Dishwasher Care and Machine Cleaner for Dishwashers online at https://www.siemens-home.bsh-group.com/ store or from customer service. Machine Care is a programme which removes various deposits in one washing...
Page 42
en Cleaning and servicing Phase Removal of Detergent Placement Grease and limes- Liquid machine care Appliance interior, e.g. cale product or machine bottle hung in the cut- descaler in powder lery basket or powder form. in the interior. Food remnants and Machine cleaner Detergent dispenser deposits...
Cleaning and servicing en 18.5 Filter system Pull down the micro filter to re- move. The filter system removes coarse soiling from the dishwashing cycle. Press the locking catches gether and lift the coarse filter out Micro filter Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may block the filters.
en Cleaning and servicing Insert the filter system into the ap- Remove the top spray arm down- pliance and turn the coarse filter wards. clockwise. Unscrew the upper spray arm Make sure that the arrow mark- and pull down to remove ings match up.
This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code on the title page and on our website siemens- home.bsh-group.com. Depending on the appliance specifications...
Page 46
en Troubleshooting WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist staff. Only use genuine spare parts when repairing the appliance. If the power cord or the appliance power cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service.
Page 47
Troubleshooting en Fault Cause and troubleshooting E:32-00 will light up The filters in the water connection of the supply or alternately or indicator AquaStop hose are blocked. for water supply lights Switch off the appliance. Pull out the mains plug. Turn off the water tap. Unscrew the water connection.
Page 48
en Troubleshooting Fault Cause and troubleshooting E:61-03 will light up alternately. Water is not drained. Not an appliance fault. Wastewater pump is blocked or the cover of the wastewater pump is loose. Clean the wastewater pump. "Clean wastewater pump", Page 51 Secure the cover of the wastewater pump so it clicks into position.
Page 49
Troubleshooting en Fault Cause and troubleshooting All LEDs lit up or Electronics have detected a fault. flashing. Press the main switch button for approx. 4 seconds. "Controls", Page 15 The appliance is reset and restarted. If the problem occurs again: Switch off the appliance. Pull out the mains plug or switch off the fuse in the fuse box.
Page 50
en Troubleshooting Fault Cause and troubleshooting Remnants of food on Filters are inserted incorrectly and/or not engaged. tableware. Insert the filters properly. "Filter system", Page 43 Engage the filters. Washing programme selected too weak. Select a more intensive washing programme. "Programmes", Page 17 Adjust the sensitivity of the sensors.
Troubleshooting en Fault Cause and troubleshooting Removable streaks Tableware has been precleaned too intensely. The are present on sensors chose a weaker programme. Stubborn soiling glasses, glassware cannot be entirely removed. with a metallic appear- Only remove large remnants of food and do not ance and cutlery.
en Transportation, storage and disposal Prise off the pump cover using a 20 Transportation, stor- spoon and grip it by the Transportation, storage and disposal age and disposal crosspiece. 20.1 Removing the appliance Disconnect the appliance from the mains power supply. Turn off the water tap. Detach the drainage connection.
Customer Service en To drain the appliance, terminate The guideline determines the programme after approx. the framework for the re- 4 minutes. turn and recycling of "Terminate programme", used appliances as ap- Page 33 plicable throughout the Switch off the appliance. Page 33 Turn off the tap.
en Technical specifications the consecutive numbering (Z-Nr.) on must be connected to the power the appliance's rating plate. supply. The rating plate is located inside the The liability guarantee is valid for appliance door. the service life of the appliance. "Familiarising yourself with your ap- A claim can only be made under pliance", Page 13 the guarantee if the appliance has...
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provi- sions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at siemens- home.bsh-group.com among the additional documents on the product page for your appliance.
Connectable Products) Regulations GmbH deems that it has complied 2023 can be found online at with www.siemens-home.bsh-group.com/ provision 5.1-1 of ETSI EN 303 uk/home among the additional docu- 645 v2.1.1 and, where relevant, ments on the product page for your provision 5.1-2 of ETSI EN 303...
Page 60
EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...
Need help?
Do you have a question about the SN95EX12CG and is the answer not in the manual?
Questions and answers