Subscribe to Our Youtube Channel
Related Manuals for Premier PD500
Summary of Contents for Premier PD500
- Page 1 Serial Number: ______________________________ Model Number: ______________________________ *Combo Model Post Driver* WARNING! To avoid Injury or death read and understand this entire manual before installing, operating, or servicing this equipment.
- Page 3 To The Owner ........................1 Warranty Registration Form ....................2 Warranty Policy ........................4 Safety Information ....................... 5 Product Specifications ......................7 High Reach Mount ....................... 8 Full Assembly Parts List ....................... 9 Hose Kit Components Parts List ..................10 Auger System Overview ..........................
- Page 4 Premier Hydraulic Post Driver Attachment. Please be sure all operators study this manual carefully and keep it on file for future reference. After reading this manual if you have any questions about your Premier Hydraulic Post Driver Attachment, please contact us as follows:...
- Page 5 Zip Code: ____________________________________ Country: ______________________________ This Premier Hydraulic Post Driver will be mounted on: _________________________________ This Premier Hydraulic Post Driver Attachment has been accepted in good condition and I have been instructed by the dealer and/or read and understand the entire Operator’s Manual for proper installation, proper and safe operation, preventative maintenance and service, warranty, and all other information covered in the Operator’s Manual.
- Page 7 Model #: _______________________________ Serial #: ____________________________________ Premier warrants its products to be free from defects in material or workmanship for a warranty period as stated below. Post Driver Attachment: 12 Months The warranty period begins on the date of purchase by the original purchaser.
- Page 8 Safety decals must always be visible and legible. If any decals are worn, damaged, or missing, they must be replaced immediately. New safety decals can be ordered directly from PREMIER. These decals are essential to your safety and the safety of others.
- Page 9 Ensure the attachment is securely latched to the host machine before use. Never stand or reach under the attachment, even with the engine off. Keep hands, feet, clothing, jewelry, and hair away from all moving parts. Never stand between the vehicle and the attachment. Stay clear during operation—never align, support, or position posts by hand or tool while the attachment is running.
- Page 10 The PREMIER Post Driver is a high-quality attachment designed for performance, flexibility and quality results. With four different energy class models and numerous potential options, we can provide a post driver solution for just about any job. Each model is available in three configurations: OPTION 1: BASIC POST DRIVER Standard post driver—built for reliable performance in a wide range of ground...
- Page 11 The High Reach Mount for skid steers offers adjustable height positions through multiple pin-on locations, allowing you to set the post driver at the ideal height for your application. To adjust, simply lay the post driver flat, align the holes at your desired height, and insert the pins. For added convenience during mounting, the unit features swivel legs that automatically swing outward when the mount is positioned perpendicular to the ground.
- Page 12 *Output speed and output torque specifications are based on theoretical values and are provided for comparative purposes only. PREMIER is continually striving to improve its products; therefore, we reserve the right to make changes to our products or specifications at any time without notice or obligation.
-
Page 13: Part Description
Figure A: Full Assembly REF. PART DESCRIPTION PART NO. POST DRIVER MODEL PD500 PD750 PD1000 PD1500 Dome Post Pad 63500 63501 63502 63503 Flat Post Pad 63504 63505 63506 63507 T-Post Driver Adapter 63510 63511 63512 63513 Chisel 63514 63515... - Page 14 Figure B: Hose Kit Components for Attachment with Auger System REF. PART QTY. PART DESCRIPTION 40012 5/16”-18 x 2-1/2” HHCS, Grade 5 40013 5/16”-18 x 1-1/4” HHCS, Grade 5 40018 Hose Holder Kit, 3252T6 40057 Hose Holder Spring 40062 5/16” x 1-1/2” OD Fender Washer, Grade 5 40077 5/16”-18 Crown Lock Nut, Grade 5 61006...
- Page 15 Figure C: Auger System Overview REF. PART QTY. PART DESCRIPTION 40004 1/2”-13 x 1-1/2” SHCS 40020 3/8”-16 x 2” HHCS 40045 3/8” Split Lock Washer 41002 3/8”-16 x 1” HHCS 50290 Mini-Skid Drive Ring 60024 9.4 Cl Motor (for MS11) 60026 15.5 Cl Motor (for MS14) 60027...
- Page 16 igure D: Auger System Drive Unit REF. PART QTY. PART DESCRIPTION 69200 2” Hex Output Shaft 69201 2-9/16” Round Output Shaft 69202 Oil Seal 69203 Bearing Cone 69204 Bearing Cup 69205 Magnetic Plug 69206 69207 Thrust Washer 69208 Lock Washer 69209 Lock Nut 69210...
- Page 17 Safety is a primary concern in the design, manufacture, sale, and use of a PREMIER Hydraulic Driver-Breaker. PREMIER confirms to you, our customer, our concern for safety. Improper operation of this equipment can cause serious personal injury or death. Operation of this attachment should only be done by a competent adult acting in compliance with both the vehicle and attachment Operator’s Manuals.
- Page 18 BREAKER 1. If the model contains an auger system, ensure that the diverter valve lever is fully in the “down” position to enable the Driver-Breaker hydraulics. 2. During the striking operation, apply appropriate disruptive force with the Breaker to guarantee effective breaking.
- Page 19 4.11. Do not use ropes, chains, etc. to suspend objects under the Breaker. In addition to being quite dangerous, suspending objects under the attachment could easily damage the Breaker. 4.12. In cold weather, the engine should be preheated before operation according to the operation and maintenance instructions of the host machine (~5-20 minutes).
-
Page 20: Repair And Maintenance
REPAIR AND MAINTENANCE Proper installation, operation, and maintenance are essential for safe, dependable performance and long service life of the PREMIER Hydraulic Driver-Breaker. All operators must read and understand this manual in full before use or service. Routine inspection and care will prevent downtime and protect both the attachment and the operator. - Page 21 Approximate capacity for MS11, MS14, and MS18: 1.5 pints. Check oil level daily. Before long-term storage: • Fill drive unit motor and hoses with clean oil. Fill planetary gear reduction to proper capacity. Grease these parts generously: drive unit output shaft, inside of auger collar, variable extension shafts, and all connecting pins.
- Page 22 The Combo Driver-Breaker configuration has the flexibility to become a concrete breaker as well as a post driver. With additional mounting locations, the mounting bracket can be moved to the top to allow this unit to be used as a concrete breaker. Follow the steps below to convert your Combo unit from a Post Driver to a Concrete Breaker.
- Page 23 1. Remove the inflation valve cap from the back head. 2. Connect the end of the pressure gauge adapter (1) to the inflation valve on the back head. 3. Remove the end cap (4) to uncover the pipe fitting for the hose. 4.
- Page 24 Problem Possible Cause Solution The driver head/breaking chisel is Inspect and replace worn parts jammed Increase of backpressure/ Return Swap male and female couplers pressure is high Insufficient hydraulic oil Supplement the hydraulic oil The oil temperature should be at least Oil temperature is too low The Driver-Breaker 30 degrees Celsius...
- Page 25 Oil Leaks Fittings loose or damaged Tighten or replace Hydraulic motor seals See dealer for repair worn or damaged For further assistance, please contact your dealer or contact Premier Attachments Customer Service Department as follows: Toll Free: 866-458-0008 Local: 260-456-8518 E-Mail:...
- Page 26 DRIVE UNIT SERVICING PROCEDURES All Power Wheel drive units and kits are shipped with a label (example shown below) that includes the Auburn Gear part number and order code. In addition to the label, Power Wheel drive units are stamped with the last four digits of the part number and the date code, which appears on the cover or hub flange.
- Page 27 4. Assemble the inner bearing cone (3) over the output shaft (1). Place the bearing cone (3) over the output shaft bearing journal. Press the bearing cone (3) down until the rollers just touch the bearing cup (4). Take care to avoid pressing the bearing cone (3) too far. 5.
- Page 28 A protective film is applied to the Power Wheel drive units at the factory to prevent rust during shipment. Additional protection may be required if the driving unit is stored for an extended period. Silastic RTV732 and General Electric Silimate RTV No. 1473 or RTV No. 1503 are currently recommended for sealing gasket surfaces.
- Page 29 Output speed and torque specifications are based on theoretical values and are provided for comparative purposes only. Premier Attachments Is continually striving to improve its products. Therefor we reserve the right to make changes to our products or specifications at any time without notice or obligation.
- Page 30 Construction Auger Teeth Part # Description 00200 Wisdom Tooth 00201 Chisel Tooth 00202 Wisdom Gage Tooth 00205 Hardfaced Wisdom Tooth Hardfaced Chisel Tooth 00206 00207 Hardfaced Wisdom Gage Tooth 00208 Carbide Wisdom Tooth 00209 Carbide Chisel Tooth 00237 RB Carbide Wisdom Tooth Tooth Pocket for CDC Augers 00225 00221...
Need help?
Do you have a question about the PD500 and is the answer not in the manual?
Questions and answers