Freedom ARLO 24635240 Manual

ARLO BED QUEEN/ARLO BED KING
24635240/ 24635233/ 24635271- 24635257/ 24635189/ 24635196
Thank you for purchasing the Arlo Bed Queen / Arlo Bed King. Before you begin to assemble your new piece of
furniture, please check to ensure that all hardware and parts have been supplied. This page lists all
contents included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void
your warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase, please contact Customer Service via the
website www.freedom.com.au or www.freedomfurniture.co.nz
Care infomation
• Use tablecloths, table runners and coasters to help protect surfaces from scratching.
• Dust once a week using a soft cloth or similar duster.
• Only use freedom recommended care products as many supermarket polishes and waxes contain
high levels of silicon and petroleum distillate which can damage the surface.
• Polish your furniture every 3 to 6 months, making sure the surface is free from dust before you start.
• Avoid placing hot or wet items directly on the surface as they can leave marks which are difficult to
remove.
• Avoid direct sunlight, as this will cause colour change. If the furniture is in direct sunlight, move items
like vases around to avoid spotting.
• Avoid applying too much polish as this will build up and need to be removed with a wood-cleaning
product.
Hardware (Supplied)
Ø8 x 30
5/16'' x 115
A x 4
B x 8
Parts
1 x1
4 x1
www.freedom.com.au
www.freedomfuniture.co.nz
C x 8
D x 8
2 x1
5 x2
Page 1 of 5
M4 x 50
F x 2
E x 1
IMPORTANT!
Once the piece of furniture is in
place,ensure the central support
leg/s is adjusted tight to the floor
!
3 x2
6 x1
M4 x 30
G x 8