Advertisement

User Manual
10 Channels
Features
Frequency(406.100~470.000 MHz)
mAh Li Polymer Battery
Voice Announcement
10 Channels
VOX levels
Low Battery Alarm
Noise Reduction Circuit
Battery Saving
High/Low TX Power selectable
Monitor
Scan
121 Codes (38 CTCSS & 83 CDCSS)
Two Way

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KP01 and is the answer not in the manual?

Questions and answers

Summary of Contents for KETELESE KP01

  • Page 1 User Manual 10 Channels Two Way Features Frequency(406.100~470.000 MHz) mAh Li Polymer Battery Voice Announcement 10 Channels VOX levels Low Battery Alarm Noise Reduction Circuit Battery Saving High/Low TX Power selectable Monitor Scan 121 Codes (38 CTCSS & 83 CDCSS)
  • Page 2 Get Familiar with the PTT Button Monitor/VOX Button Scan/ High/Low power selectable Antenna Channel Selection Knob Power/Volume Switch Microphone Status Indicator Keys to Remove Battery Screws Charging Contact...
  • Page 3: Charging Operation

    Charging Operation Installation/Removal of the Battery 1. Installation of the Battery Please use specified charger to charge the battery; the indicator light of the charger shows the condition Please make sure the radio is powered off, and then of charging operation. place the battery into the corresponding position according to Indicator status Indicator light...
  • Page 4 Installation /Removal of Belt clip 2. Removal of the battery To remove the battery, please make sure the radio is powered off. Press and hold the 'Keys to Remove Battery' Installation of the belt clip on both sides to remove the battery. lace the belt clip in the corresponding position of the belt Then slide the battery down to remove it clip screw hole, and fix it with two screws by a cross...
  • Page 5 Operation Guide Power On/Off Receiving Rotate the Power knob clockwise until a “ka-ta” sound is heard Release PTT key, radio enter into the receiving mode to turn on the power. the indicator lights turns green Please adjust the volume appropriately to achieve the Counter clockwise to turn off.
  • Page 6: Additional Function

    Time Out Timer VOX (Voice Operated Transmission) Modify VOX level here, there are 5 VOX levels, select the VOX level you want. Additional Function CTCSS / CDCSS Modify CTCSS/CDCSS code here to select desired code.
  • Page 7 : Activate Lifetime Warranty To extend your 1 year warranty to lifetime Please register on our website to activate computer operating system Tech Support Service Ensure the radio power on Email:ktls004@shineconn.net www.ketelese.online of the settings of your radio.
  • Page 8: Troubleshooting Guide

    Troubleshooting Guide Problems Solutions Battery may have been exhausted. Please replace it with a new battery or recharging the battery. No Power Battery may not be installed correctly. Please remove the battery and reload it. Battery’s lifetime is due. Please replace it with a new battery. attery is not charged fully, so please ensure that the battery indicator is green when removing it.
  • Page 9: Maintenance And Cleaning

    Maintenance and Cleaning FCC Warning Statement Do not lift the radio directly by its antenna or external microphone. Dust the radio with an anti-pilling cloth to prevent bad contact. This equipment has been tested and found to comply with the When the radio is , please cover the limits for a Class B digital device, pursuant to Part 15 of the FCC...
  • Page 10: Sar Statement

    ALWAYS the FCC RF exposure guidelines for use with an accessory that use KETELESE authoried accessories ( antennas,batteries, belt clips, speaker/mics, etc). contains no metal and positions the device a minimum of 0mm from the body.

Table of Contents