TIME LED 790205 Installation And Operating Instructions

TIME LED
Package includes:
1 x 5.8Ghz Microwave Sensor
1 x Wiska Box (61.5 - 34.5 - 27mm)
2 x M20 IP65 Cable Gland
1 x Fixing Bolt for 790205 + 2 0 rings
1 x Fixing Bolt for 790212 + 2 0 rings
1 x Manual
Safety:
• Installation of this product should only be carried out by a qualified electrician or competent person to the latest
Building and current IEE Wiring Regulations (BS7671).
• Ensure to isolate mains prior to installation/maintenance.
• Check the total load on the circuit (including when this Sensor is fitted) does not exceed the rating of the circuit
cable, fuse or circuit breaker.
• Please note the IP (Ingress of Protection) rating of this product when deciding the location for installation.
• Outdoor electrical installation should be protected by an earth leakage circuit breaker such as a residual current
device (RCD). This will cut the power supply should it detect a leakage of current to earth which can be potentially
dangerous.
TIME LED is part of Pitacs Limited. For customer support contact:
Bradbourne Point, Bradbourne Drive, Tilbrook, Milton Keynes, Buckinghamshire MK? 8AT
T: +44 (0)1908 271155 F: +44 (0)1908 640017 E: info@timeled.co.uk W: www.timeled.co.uk
UK
CA
Highbay Sensor Upgrade Kit
Installation and Operating Instructions
Suitable for 790205 / 790212
Read and follow instructions before installing this kit.
Save this manual for future reference.
G)
COMPUANT
0
-
®