TIME LED Elements Installation And Operating Instructions

Elements 240w Premium Multibeam Highbay
Read and follow instructions before operating your light. Save this manual for future reference.
Package includes:
1 x Black 240W Premium Multibeam Highbay
1 x Manual
Safety:
• This highbay must be earthed.
• Before installation or maintenance, ensure that the mains supply to the highbay is switched off and the circuit supply fuses are removed or
circuit breaker turned off.
• Check that the total load on the circuit, including when this highbay is fitted, does not exceed the rating of the circuit cable fuse of the
circuit breaker.
Cleaning:
• Do not use any chemical or abrasive cleaners.
• Clean product with only a soft dry cloth.
• Cleaning should be carried out at regular intervals so as not to impair performance or thermal safety of the luminaire.
Warning:
• This product is not a toy and contains small parts.
• This product is unsuitable for installation in or near coastal and marine environments.
Warranty:
• This product is warranted to be free of defects in materials, design and workmanship for 5 years from the date of purchase (conditions apply,
please see TIME LED website for further details). If a suspected fault should develop in this time, please contact us via the address below.
Recycling Advice:
Waste Electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
Installation of this luminaire should only be carried out by a qualified electrician or competent person to the current Building and
IEE Wiring Regulations (BS7671).
TIME LED is part of Pitacs Limited. For customer support contact:
Bradbourne Point, Bradbourne Drive, Tilbrook, Milton Keynes, Buckinghamshire MK7 8AT
T: +44 (0)1908 271155 F: +44 (0)1908 640017 E: info@timeled.co.uk W: www.timeled.co.uk
Installation and Operating Instructions
INS-790212-V2
015 015