INTRODUCTION The bicycle you have purchased is a bicycle with an electric power assist system. Electrically assisted bicycles differ from normal bicycles in some respects. Please read these instructions carefully and ride your bicycle correctly, safely and comfortably. ● Due to changes in product specifications and other factors, the illustrations and contents of this manual may differ slightly from the actual product.
ABOUT WARNING SIGNS Safe Use To prevent injury to the user or others, property damage, and damage to the electric power-assisted bicycle, familiarise yourself with the information in this manual and observe the warnings, cautions and prohibitions. *Careless or incorrect operation may result in an accident. Please familiarise yourself with the contents of this manual, the individual pages and the labels on the main unit, and observe the instructions.
SAFETY PRECAUTIONS - 1. SAFETY PRECAUTIONS - 1. About batteries/chargers ·Do not insert or remove the power ·The battery, charging adaptor and plug or charging plug with wet cord are for professional use and hands. must never be used for anything other than charging our lightning →...
SAFETY PRECAUTIONS - 2. About the battery/charger ·Do not insert or remove the power ·Be sure to disconnect the power plug or charging plug with wet plug from the mains when not in hands. use for long periods of time. →...
Page 7
SAFETY PRECAUTIONS - 3. For safe electric bicycle elking ·Do not ‘kick-ride’, always straddle the saddle before starting off. → Adding force to the pedals may cause the assistica to work, resulting in a risk of tipping over or a contact accident. ·Do not park, stop or push the bike while the operation switch is set to ‘ON’.
PRODUCT STRUCTURE DIAGRAM sheet Brakes Gauges Battery Rear lights Rear suspension VIN number Headlight Tyres Forks Motor Pedals !!! The VIN number is stamped on the connection between the handlebar and the front fork. The VIN is important and appears during procedures such as security registration.
ASSEMBLY INSTRUCTIONS - 2 Grip installation Lift the drawer rod, loosen the screws, lift the fastening parts, insert the handle and finally attach the drawer rod. Battery installation Use the key to unlock the battery, pull out the drawer rod, insert the battery and finally remove the power key from the bottom and insert it into the power connector.
ASSEMBLY INSTRUCTIONS - 3 Pedal mounting The battery switch is located under the seat. First press the battery switch, the battery switch will lower and light up, then press and hold the meter switch for 3-5 seconds to activate the meter Switching the power on and off The battery switch is located under the seat.
METHODS OF CHARGING Charging while plugged in Plug the power cord into the main unit to charge the battery. The charging port is located under the seat. The lamp on the charger lights up red when the battery is being charged and changes colour to green when charging is complete.
METER INSTRUCTIONS - 1 1. Button function 1.1 Key Function ‘+’ button, “-” button, power button, Support single/double click/long press . 1.2 Switching the power on/off Long press the power button to turn on the power, long press the power button to turn off the power;...
Page 13
METER INSTRUCTIONS- 2 headlight Power Real-time Gear speed Fault icon Mileage value area Total Mileage(ODO) Single Mileage (TRIP) TIME Average Velocity(AVG) Maximum Velocity (MAX) 3. Fault Code Display When there is a malfunction in the electronic control system of the power assisted vehicle, the instrument will automatically display the fault code, see the following table for the detailed definition of the fault code fault code...
METER INSTRUCTIONS - 3 4. Basic Parameter Setting 4.1 Parameter setting under power-on condition (when the vehicle is stationary), press and hold down the ‘+’ and ‘-’ buttons at the same time for more than 2s to enter the parameter setting interface; select the corresponding option by switching between ‘+’...
Company to the following persons. Date of sale Year Month Name of Society: Shenzhen Cyrusher Technology Selling company Domicile:No.9, No.2, Fuhai Industrial Zone, Fuyong Street 211 Bao'an District Shenzhen CN Telephone No.: 008615959240023 Address.
WARRANTY CARD - 1 We warrant your electrically power assisted bicycle in accordance with this warranty. [warranty provision] 1.When you start using the product, you have agreed to these provisions and these provisions shall become effective between you and us. 2.These Rules apply only to use in Japan.
Page 17
WARRANTY CARD - 2 are therefore not applicable. However, if the customer consults us in advance, checks the product specifications at his/her own risk, accepts the performance of the product and takes the necessary safety measures, the warranty may be applied.
Page 18
WARRANTY CARD - 3 [The costs arising from the following situations will not be borne by the company]. 1. Tools used for the repair of parts covered by the warranty for repair. 2. The cost of inspection equipment for subsequent inspections as stipulated by law.
Page 20
Name of Society: Shenzhen Cyrusher Technology Co. Domicile:No.9, No.2, Fuhai Industrial Zone, Fuyong Street 211 Bao'an District Shenzhen CN Telephone No.: 008615959240023...
Need help?
Do you have a question about the SONDER and is the answer not in the manual?
Questions and answers