Sealey VS290 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
Instructions protection
1. SAFETY
1.1. ELECTRICAL SAFETY
WARNING! It is the user's responsibility to check the following:
‰
Check all electrical equipment and appliances to ensure that they are safe before using.
9
Inspect power supply leads, plugs and all electrical connections for wear and damage.
9
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
9
DO NOT use worn or damaged cables, plugs or connectors.
8
Ensure that any faulty item is repaired or replaced immediately by a Sealey qualified technician.
9
If the cable or plug is damaged during use, switch off the electricity supply and remove from use.
9
Sealey recommend that an RCD (Residual Current Device) is used with all electrical products.
9
IMPORTANT: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the
correct fuse.
DO NOT pull or carry the appliance by the power cable.
8
DO NOT pull the plug from the socket by the cable.
8
1.2. EXTENSION CORDS
WARNING! If an extension cord is required, only the following specifications are approved for use with the induction heater:
‰
- 7.6-meter cord: 2 AWG
- 15.2-meter cord: 1 AWG
Using cords outside these specifications may result in overheating or insufficient power delivery.
DO NOT connect multiple extension cords in series.
8
Use only the specified extension cords listed above.
9
Always fully unwrap extension cords before use. Tightly coiled cords can overheat and pose a fire hazard.
9
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid
9
a hazard.
1.3. GENERAL SAFETY
DO NOT touch heating parts with bare hands.
8
DO NOT touch live electrical parts or electrodes with bare skin or wet clothing.
8
DO NOT operate in the vicinity of containers under pressure, or in the presence of explosive dust, gases or fumes.
8
DO NOT cover or stick objects into any of the ventilation holes on the equipment.
8
DO NOT wear clothing containing metal components, such as zippers, rivets, or metallic buttons, while operating the induction heater.
8
The heater can rapidly heat these metal parts, potentially causing serious burns or igniting the clothing.
WARNING! The magnetic fields created by high currents may affect the operation of pacemakers. DO NOT operate or come within
‰
three feet of an active induction heater, if you have a cardiac pacemaker or any electronic or metal surgical implant. Wearers of vital
electronic equipment should consult their Doctor before using Induction heater, although the magnetic field generated by the heater
typically extends only a few inches, it can interfere with the function of implanted medical devices. This applies to both users and
bystanders. To prevent accidental exposure, individuals with such implants must stay at least three feet away from the induction heater
while it is in operation.
WARNING! Keep bystanders, children, visitors, and animals at a safe distance while operating the induction heater. Their presence
‰
may cause distractions, increasing the risk of losing control of the equipment and leading to potential injury or damage.
Ensure area is adequately ventilated and dry.
9
Before operating the induction heater, remove all metallic objects from your person, including coins, keys, chains, pocket knives,
9
tokens, and miniature tools. DO NOT carry or wear these items while the heater is in use. The induction heater can rapidly heat metal
objects, posing a serious risk of burns or ignition of clothing.
Ensure ambient temperature is between -10 to 40°C
9
Avoid using in bright sunshine or rain.
9
DO NOT use the machine in an environment where the air is polluted with conductive dust or gases.
8
DO NOT overreach; maintain proper footing and balance at all times. Ensuring stable footing and balance allows for better control of
8
the induction heater, especially in unexpected situations.
DO NOT operate the induction heater while under the influence of drugs, alcohol, or any medication that may impair your judgment or
8
coordination. Impaired operation increases the risk of accidents and injury.
© Jack Sealey Limited
DUAL AC/COOLANT COOLED INDUCTION
HEATER 12KW
MODEL NO:
Wear protective Electrical shock
gloves hazard
Original Language Version
VS290
Warning Do not use in
magnetic field the vicinity of a
pacemaker
Keep away from Wear
rain
respiratory
protection
VS290 Issue 3 03/06/2025