Whirlpool Valencia Installation And Cleaning Instructions

Electrical Connections
Grounding (Earth) is required. The unit should be installed and grounded by a qualified
electrician.
Earth Leakage circuit breaker should be installed to turn off the circuit in case leakage
current >30 mA
The unit should be connected to source voltage of 220 VAC With Frequancy of 50Hz
Don't operate hydromassage system unless the bath is filled with water to at least 25mm
above the highest jet.
Cleaning
Don't clean the tub and accessories with hard or coarse material to avoid any scratches.
Don't clean the tub and accessories with organic solvents to avoid any damages.
Clean the surface with a soft cloth and soapy water.
It's not recommended to leave water in the tub for long time or use this tub
for washing purpose. Pls drain off the water after the bath and dissconnect
the power supply.
WhirlPool Installation
Cleaning Guide
&