Related Manuals for Baby Elegance Be by Me
Summary of Contents for Baby Elegance Be by Me
- Page 1 PLEASE READ THE FOLLOWING INSTRUCTIONS AND WARNINGS CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE.
-
Page 2: Safety Information
• DO NOT use the product if any of the parts are broken, damaged or missing. Contact Baby Elegance for replacement parts and extra instructions if necessary. DO NOT replace any of the parts yourself. •... - Page 3 • WARNING: To avoid the risk of strangulation, the attachment system to the adult bed should always be kept out of the crib and out of reach. • WARNING: Do not use more than one mattress in the crib.
- Page 4 PLEASE CHECK THAT YOU HAVE ALL THE COMPONENTS LISTED BELOW BEFORE STARTING ASSEMBLY Bassinet frame Mattress Wheels x4 Suitable from birth to 24 months, up to 15kgs...
- Page 5 1. Take the frame out of the box carefully. The bedside sleeper should be placed on a level floor. Click 2. Push down each of the legs until it locks. Click 3. Lift the upper frame Click until it locks.
- Page 6 4. Close the zipper on either side 5. Fasten the velcro under of the mesh panel. the bassinet body to the frame. Click 6. Push the wheels into the legs 7. Fit the mattress into the bassinet. to lock them.
- Page 7 Adjusting the bassinet height 1) To raise or lower, press the height adjuster button on the side of the bassinet. 2) Repeat to the other side. There are 6 different height positions. Locking and unlocking the wheels 1) Push down the clip to lock the wheels.
- Page 8 1. Open the zippers on the mesh panel. 2. Push the button under the side panel bar upwards. At the same time, pull it out to disengage the mesh panel.
- Page 9 4. Move the sleeper close to the parent’s bed. Check the height of the sleeper against the height of the bed. The height of the open side edge (after the mesh panel has been lowered) should always be aligned with the height of the parent’s mattress.
- Page 10 / bassinet 1. Take the mattress out of the sleeper / bassinet. Unfasten the side cover and peel off to fold the arms down. 2. Push the button under the side moulding downwards and at the same time lift...
- Page 11 3. To fold, push the sides of the bassinet base together. 4. Wrap the mattress around the sleeper and fasten with the velcro attached to the underside of the mattress. 5. Push the button inside...
- Page 12 WARNINGS • NEVER leave baby in the bassinet with the side down unless it is positioned in bedside sleeper mode and attached securely to the parent’s bed. • The bedside sleeper is only suitable to use with adult beds that are between 43 and 53 centimetres in height from floor to top of the adult mattress.
- Page 13 Mattress, boxsprings & Frame extended frame aligned Unacceptable: bed, mattress, Acceptable: bed frame in-line boxspring frame not in-line NEVER use the bedside sleeper in the co-sleeping position without the anchor strap attached around the adult bed base and buckled under the bedside sleeper.
-
Page 14: Care And Maintenance
• To prolong the life of your bedside sleeper keep it clean and do not leave it in direct sunlight for extended periods of time. • Removable fabric covers and trims may be cleaned using warm water with a household soap or mild detergent. - Page 15 cot...
- Page 16 Baby Elegance, Dublin, Ireland www.babyelegance.com...
Need help?
Do you have a question about the Be by Me and is the answer not in the manual?
Questions and answers