Advertisement
Quick Links
Required Tools: (Not included)
• Phillips Screwdriver
WARNING
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Step 1
Using a Phillips screwdriver, remove the ten (10)
screws from the bottom of the unit.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
BATTERY REPLACEMENT
PART NUMBERS: V1: W13111701003
Step 2
Flip the unit over and lift the deck. Be careful not to
pull the wires from the push button. Set the deck
cover aside.
COLORRAVE
V2+: W13111712003
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Razor Color Rave V1
Summary of Contents for Razor Color Rave V1
- Page 1 Flip the unit over and lift the deck. Be careful not to screws from the bottom of the unit. pull the wires from the push button. Set the deck cover aside. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
- Page 2 Install the new battery, then reverse steps 1 through 5. screws from the battery holder and carefully remove ATTENTION: Charge battery 4 hours before using. the battery. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time. 250410...
Need help?
Do you have a question about the Color Rave V1 and is the answer not in the manual?
Questions and answers