SilverStone PT14 Quick Start Manual

EN.
DE.
FR.
IT.
ES.
KR.
RU.
JP.
TW.
IT.
ES.
KR.
RU.
JP.
TW.
CN.
Optional monitor installation
EN.
DE.
FR.
IT.
ES.
KR.
RU.
JP.
TW.
CN.
EN.
DE.
FR.
IT.
ES.
KR.
RU.
JP.
TW.
CN.
EN.
DE.
FR.
IT.
Es.
KR.
RU.
JP.
TW.
CN.
Secure four screws and foot stands back to the bottom of PT14.
Vier Schrauben und FuRstander wieder an der Unterseite des PT14 befestigen.
Revissez les quatre vis et les pieds au bas du PT14.
Fissare di nuovo le quattro viti ed i piedini alla parte inferiore di PT14.
Fije de nuevo cuatro tornillos y soportes en la parte inferior de la PT14.
472] LAS AHS SHO PT142| SHEH UES} ARTS Se DA stich.
3aTAHUTe ueTbipe BUHTA n CTOMKM B HYxKHeEM UacTh Kopnyca PT14.
PTIADIÉ RIZ AAA ETYRXSLFILAELET.
AG PU RAR AR EUR SE [BP T 1 4
JEPPAR 5 BIS KIBIPT14,
Secure four screws back to the front and rear of PT14
Vier Schrauben wieder an der Vorder- und Rückseite des PT14 befestigen
Revissez les quatre vis à l'avant et à l'arrière du PT14.
Fissare di nuovo le quattro viti sulla parte frontale e posteriore di PT14.
Fije de nuevo cuatro tornillos en la parte frontal y posterior de la PT14.
47H2| LEAKS PT142| MAB SAO] SS DAs ch
3araHuTe uerbipe BHHTa Ha nepeaHeñ n sanHeñ cTOpoHe Kopnyca PT14
PTIADRTÉILRADAAÉEÆELET,
ABPT 1 4B PURES ER RARE ©
AGPT14A A BAP SR RTE.
Secure anti-vibration rubber gasket with two screws on the bottom of PT14.
Vibrationsfeste Gummidichtung mit zwei Schrauben an der Unterseite des PT14 anbringen.
Vissez la rondelle en caoutchouc anti-vibration avec les deux vis au bas du PT14
Fissare le guarnizioni di gomma anti-vibrazione con due viti sulla parte inferiore di PT14.
Fije la junta de goma anti vibracién con dos tornillos en la parte inferior de la PT14.
PT142]
Fe LAS ASSH AS XI WH PAWS HEtol DA Etch
C MoMoulbio ABYX BUHTOB sakpenuTe AHTHBNŐPAŲMOHHYIO PESHHOBYIO NPOKNAAKY
Ha HuxHeï uacru Kopnyca PT14
PTI SBIR ANE UP e ROAR CHMELET.
HADS RER LB PAR AA SHET ASPT 4B.
RS HE AS ÉLIRE PR 22 GI PTIA4JR ÈS.
Secure VESA mount bracket with four screws on rear of monitor.
VESA-Montagehalterung mit vier Schrauben an der Rückseite des Monitors befestigen.
Vissez la console de montage VESA avec les quatre vis à l'arrière de l'écran.
Fissare il supporto VESA con quattro viti alla parte posteriore del monitor
Fije el bracket de la montura VESA con cuatro tornillos a la parte trasera del monitor.
Li FHS] LEAS AHS Sto] VESA YẸ SAAS Duo Sao] DA EC
C Momouibio UeTbIDeX BUHTOB 3akpenUTe MOHTAXHbIÑ kpoHiureñH VESA Ha sanneñ naHenu MoHUTOpA
VESA JYI TYEE PEMICKRUOAACHELET.
HÖVESA TSAR LL PURE MR AR SN ETIS RHEA o
HIVESA RAR A PU FAR Ze Gi EF BERRA o
Align and push PT14 into the VESA bracket, than push downward to complete installation.
PT14 an der VESA-Halterung ausrichten und drücken; dann zum Abschließen der Installation nach unten drücken.
Alignez et poussez le PT14 dans la console VESA, puis poussez vers le bas pour terminer l'installation.
Allineare e spingere PT14 ne supporto VESA, quindi spingere verso il basso per completare l'installazione.
Alinee y presione la PT14 contra el bracket VESA, luego presione hacia abajo para completar la instalación.
PT14& VESA SeHZlol] SA HBAS Uo WE + oja Se LAS ete strict
BtiposHañTe n ycTanoBnTe PT14 B KpOHUWTeMH VESA, 3aTeM HaxMUTe BHN3 ANA OKOHYATENbHOÑ
YCTAHOBKH.
PTIAEVESAD ST Yh IS t THEA, FAIL CRB ISTE TCT.
SEASPT 1 AEI AR VESARS RIRE N, HAE TINEST EMR.
SERFPTIAXISEVESA BURN, HAE RIMES RAIA oR RR.
SILVER STONE'
Designing Inspiration
PT14
Premium aluminum NUC case with fanless capability
Intel NUC compatible
Premium all aluminium construction
Super small at 0.5 liter
Top cover with heat-pipe for excellent heat conducting efficiency
Includes compact 60mm PWM fan for additional cooling or safety
Meet VESA Mounting Interface Standard
All trademarks are registered to their respective owners.
© 2013 SilverStonetek Co., Ltd. All Rights Reserved.
NO.G11219330
If your NUC motherboard comes with CPU thermal module, please remove it first
Warranty Information
This product has a limited 1 year warranty in North America and Australia
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
Warra ms & conditions
1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology's jurisdiction
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc...)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken
Loss or damages resulted from conditions other than ones listed above are not covered under warrant
2. Under warranty, SilverStone Technology's maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages,
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization ("RMA") number from SilverStone, Updated warranty information will be posted on SilverStone's official website.
Please visit http:/www.silverstonetek.com for the latest updates.
L Pi
Additional info & contacts
For North America (usasupport@silverstonetek.com)
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent
ack to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology
n USA by first downloading the "USA RMA form for end-users" form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only (support@silverstonetek.com)
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above "Warranty terms & conditions" for further warranty details.
ilverStone Technology Co., Ltd. 12F No, 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
'standard international call charges apply)
For Europe (support.eu@silverstonetek.de)
For all other regions (support@silverstonetek.com)