FROSTER MED 70 The unit has the following specifications: Manual defrosting Lockable door Contact Germany PHILIPP KIRSCH GMBH Im Lossenfeld 14 77731 Willstätt-Sand, Germany Telephone: +49 (0) 781 9227 0 Fax: +49 (0) 781 9227 200 Email: info@kirsch-medical.de Mon - Thurs: 08.00 to 12.15, 13.15 to 16.30 Fri: 08.00 to 12.00, 13.00 to 16.00...
Safety Symbols in this manual Safety This section provides an overview of all important safety aspects for optimal protection of patients and staff, and for safe and trouble-free operation of the unit. Non-compliance with the instructions and safety warnings in this instruction manual can cause considerable risks.
Safety Residual risksResidual risks Other markings Mark Explanation Step-by-step instructions ð Results of actions References to sections in this manual Lists without a specified order 1.2 Intended use The pharmaceutical freezer is used for commercial storage of spe- cial pharmaceuticals and pharmaceutical ingredients. The pharma- ceutical freezer is not a medical product.
Page 9
Safety Residual risksResidual risks Electrostatic discharge DANGER! Danger due to electrostatic discharge! Electrostatic charging and discharging endangers or invalidates the function of the explosion-protected inte- rior. Make sure that no electrostatic discharge can take place in the interior. – Before working in the interior of the unit, touch an earthed item (e.g.
Page 10
Safety Residual risksResidual risks Tilting the unit WARNING! Danger of crushing injuries from falling unit! If the unit is tilted, it will fall over in an uncontrolled fashion. When the unit falls over, there is a danger of crushing to the hands and feet. –...
Safety Safety labelling Contamination of chilled goods CAUTION! Danger to chilled goods due to contamination! A dirty unit can contaminate the stored chilled goods. A contamination can damage or destroy the chilled goods. – Do not store contaminated chilled goods in the unit. –...
Safety Personnel qualification Symbol Meaning CE labelling Read the instructions for use Manufacturer Date of manufacture Serial number Attention Old devices must be disposed of separately from household waste. Batteries or rechargeable batteries that are not permanently installed must be removed before- hand and disposed of separately.
No other staff is permitted to carry out this work. Contact the manufacturer’s customer service to carry out the necessary work. Kirsch service contact: PHILIPP KIRSCH GMBH Im Lossenfeld 14 77731 Willstätt-Sand, Germany...
Page 14
Safety Personal protective equipment Personnel must wear personal protective equipment when per- forming the various tasks on and with the device. This equipment is referred to separately in the individual chapters in these instruc- tions. This personal protective equipment is explained below: Chemical-resistant protective gloves Chemical-resistant protective gloves protect the hands from aggressive chemicals.
Detailed function description Details on control Detailed function description 2.1 Details on control Fig. 2: Control unit The temperature controller contains the temperature controller, the temperature selector knob and the temperature sensor. The temperature can be set using the rotary knob on the tem- perature controller.
Page 16
Detailed function description Details on control Freezer ESSENTIAL FROSTER-Series 09.04.2025...
Maintenance and Customization Switching the door hinge Maintenance and Customization DANGER! Danger due to live parts! – Unplug the power plug before carrying out any work. WARNING! Risk of death due to premature reactivation! In the event of reactivation, there is a risk of death for anyone in the danger zone.
Maintenance and Customization Replacing the cooling machine 3.2 Replacing the door lock Door lock in the door Tool: Socket wrench 22 mm Undo the screw in the deadbolt on the inside of the door. Pull out the deadbolt, round cover flap and insulating sleeve. Undo the securing nut with the socket wrench (22 mm).
Page 19
Maintenance and Customization Replacing the cooling machine For Eco units: Only the entire cooling machine can be replaced. The refrigerant R600a or R290 is used in the cooling circuit of the Eco unit. Open the door. Remove the evaporator plate. Open the back wall vent at the rear.
Page 20
Maintenance and Customization Replacing the cooling machine Freezer ESSENTIAL FROSTER-Series 09.04.2025...
Appendix Installation drawing 4.2 Installation drawing ESSENTIAL FROSTER 70 Installation drawing min.515 min.480 Air flow Door with coupling plate Note during installation: Air flow at top and bottom: without cooling unit fan: min. 300cm² with cooling unit fan: min. 100cm² Drawing Nr.: 070702-0 Fig.
Page 25
Appendix wiring diagram The wiring diagram configuration varies depending on the model. The legend describes the maximum configu- ration. Temperature controller Condenser blower Condenser (optional) Drip frame heater Power plug Start-up relay blue (blau) Defrosting timer brown (braun) Compressor motor green-yellow (grün-gelb) black (schwarz) 09.04.2025...
Appendix Spare parts list 4.5 Spare parts list Cooling machine Current Meaning item number 10290 Cooling machine VKS3702K 10959 Motor operating capacitor 10958 Start-up device 103N0016 114660 Compressor rubber buffer Control Current Meaning item number 055676 Temperature controller VKZ 1055 021172 Rotary knob for temperature controller 591485...
Page 28
Appendix Spare parts list Refrigerator door Current Meaning item number 220021 Door ESSENTIAL FROSTER-70 RIGHT 220134 Door seal 704x451 mm, snap-in type 217128 Handle recess 215127 Cylinder lock, 64 mm, with 2 keys 270125 Key, 1001 220603 Strike plate for lock 220125 Bushing for pin hinge Option...
Need help?
Do you have a question about the ESSENTIAL FROSTER Series and is the answer not in the manual?
Questions and answers