Do you have a question about the AJ3120 and is the answer not in the manual?
Questions and answers
An
February 7, 2025
Minuten en urenknop werkt niet meer
1 comments:
Mr. Anderson
February 10, 2025
The minutes and hours buttons on the Philips AJ3120 may not be working due to the following reasons:
1. Incorrect Operation – The manual specifies that the HR (hours) and MIN (minutes) buttons should be pressed separately and not simultaneously when setting the time or alarm. 2. Clock Control Position – Ensure that the clock control is set to "SET TIME" or "SET ALARM" before adjusting the hours or minutes. If it is in the "CLOCK" position, the buttons will not function for setting. 3. Power Issues – If the device is not receiving power from the main supply or the backup battery (9V), the buttons may not respond. 4. Mechanical or Electrical Fault – If the buttons are unresponsive despite correct operation, there may be a mechanical issue (stuck button) or an internal electrical fault that requires servicing.
Try these steps to troubleshoot the issue. If the problem persists, servicing may be required.
Page 1
3120 3120 Clock radio • Repeat alarm • Wake up to radio or buzzer • 24 hour alarm reset • FM/AM tuner • Easy alarm/ time set • Sleeptimer • Battery back-up...
Page 2
3120 3120 Clock radio Standard product information Clock/ alarm • Electronic clock • Wake up by radio or buzzer • Alarm Single alarm, Sleeptimer function, Repeat alarm (9 minutes) Large LED display • Time/alarm setting Hours/minutes Repeat alarm Tuner Switches off the alarm for 9 minutes. •...
Need help?
Do you have a question about the AJ3120 and is the answer not in the manual?
Questions and answers
Minuten en urenknop werkt niet meer
The minutes and hours buttons on the Philips AJ3120 may not be working due to the following reasons:
1. Incorrect Operation – The manual specifies that the HR (hours) and MIN (minutes) buttons should be pressed separately and not simultaneously when setting the time or alarm.
2. Clock Control Position – Ensure that the clock control is set to "SET TIME" or "SET ALARM" before adjusting the hours or minutes. If it is in the "CLOCK" position, the buttons will not function for setting.
3. Power Issues – If the device is not receiving power from the main supply or the backup battery (9V), the buttons may not respond.
4. Mechanical or Electrical Fault – If the buttons are unresponsive despite correct operation, there may be a mechanical issue (stuck button) or an internal electrical fault that requires servicing.
Try these steps to troubleshoot the issue. If the problem persists, servicing may be required.
This answer is automatically generated