Page 2
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND,...
Page 3
-10 °C (14 °F) and 35 °C (95 °F). IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the ASUS PadFone body except on the sides where the I/O ports are located.
Page 4
with unprotected skin. • Do not remove and short-circuit the battery, as it may overheat and cause a fire. Keep it away from jewellery and other metal objects. • Do not remove and dispose of the battery in fire. It could explode and release harmful substances into the environment.
Page 5
If you have any reason to suspect that interference is taking place, switch off your PadFone device immediately. Hearing aids Some digital phones may interfere with some hearing aids. In the event of such interference, call ASUS Customer Service to discuss alternatives.
Page 6
Other medical devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your PadFone device off in healthcare facilities when any regulations posted in these areas instruct you to do so.
Page 7
Areas with a potentially explosive environment are often, but not always, clearly marked. They include fuelling areas such as gas stations, below decks on boats, fuel or chemical transfer or storage facilities, vehicles using liquified petroleum gas (such as propane or butane), areas where the air contains chemicals or articles, such as grain, dust, or metal powders, and any other area where you would normally be advised to turn off your vehicle’s engine.
Page 8
WARNING: The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations. Federal Communication Commission Interference Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 9
RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR.
Page 10
The maximum SAR value when using the headset for each frequency band is listed below: Band Position SAR 1g (W/kg) Head 0.23 GSM850 Body (1.0cm Gap) 1.40 Hotspot (1.0cm Gap) 1.40 Head 0.18 GSM1900 Body (1.0cm Gap) 0.59 Hotspot (1.0cm Gap) 0.59 Head 0.40...
Page 11
The maximum SAR value of the PadFone Station for each frequency band is listed below: Band Position SAR 1g (W/kg) GSM850 Body 1.12 GSM1900 Body 1.03 WCDMA II Body 1.18 WCDMA V Body 0.55 LTE 2 Body 0.76 LTE 4 Body 1.00 LTE 5...
Page 12
for reduced interference making it easier to hear conversations on the phone when using the hearing aid microphone, and a “T” rating that enables the phone to be used with hearing aids operating in the telecoil mode thus reducing unwanted background noise. HOW WILL I KNOW WHICH WIRELESS PHONES ARE HEARING AID COMPATIBLE? The Hearing Aid Compatibility rating is displayed on the wireless...
Page 13
Tel: 886228943447; Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS PadFone X mini, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards.
Need help?
Do you have a question about the T00SP and is the answer not in the manual?
Questions and answers