Subscribe to Our Youtube Channel
Related Manuals for Supratech SMART
Summary of Contents for Supratech SMART
- Page 1 SMART AKWA EXTREME TOUCH FREE ELITE DECK-MOUNTED AUTOMATIC LIQUID SOAP DISPENSERS INSTALLATION AND MAINTENANCE GUIDE INSTALLATION AND MAINTENANCE GUIDE...
- Page 2 The tradenames, trademarks, logos, and service marks presented in this document, including their design, are the property of SUPRATECH or other third parties and you are not permitted to use them...
- Page 3 T E C H N I C A L C H A R A C T E R I S T I C S Ø28 Ø38 Ø38 Ø4 Ø25 20.5 Ø90 Ø90 AKWA TOUCH FREE SMART RES-87 RES-84 RES-32 on mains on mains on mains AKWA TOUCH FREE SMART RES-87P...
- Page 4 T E C H N I C A L C H A R A C T E R I S T I C S Ø28 Ø38 Ø38 Ø4 Ø19 Ø25 AKWA RES-87-AM6 TOUCH FREE SMART RES-84-AM6 RES-32-AM6 6L tank 6L tank 6L tank Ø38 Ø38 Ø25 Ø3...
- Page 5 P A C K C O N T E N T S 1 X SOAP DISPENSER BODY (WITH SENSOR) 1 X PUMP ASSEMBLY WITH BOTTLE SUPPORT AND SOAP TANK 1 X IP67 BATTERY BOX 230/12V TRANSFORMER (6 X LR20 NOT SUPPLIED)
-
Page 6: Check Contents
Thicker liquid soap flows slower and inhibits the pump valve, causing strain and damage. The pH level of all soaps used in SUPRATECH liquid soap dispensers should be between 6.5 and 8.5. Lower levels will lead to corrosion of the dispenser, rubber, and plastic components. -
Page 7: Step 1 - Preparing For Installation
I N S T A L L A T I O N STEP 1 – PREPARING FOR INSTALLATION For the ELITE, EXTREME, SMART, AKWA and TOUCH-FREE soap dispensers: MAX 30 Cut a suitable opening in the worktop or MIN 26 washbasin at the desired location. - Page 8 I N S T A L L A T I O N STEP 2 – INSTALLING THE SOAP DISPENSER For the ELITE, EXTREME, SMART, AKWA and TOUCH-FREE soap dispensers: Place the soap dispenser along with the bottom o-ring into the hole made in the worktop or washbasin.
-
Page 9: Step 3 - Connecting The Power Source
I N S T A L L A T I O N STEP 3 – CONNECTING THE POWER SOURCE Remove the protective sticker covering the sensor and move away from sensor range Connect the soap pump connector to the matching NOT CONNECTED PROPERLY connector from the sensor. - Page 10 F I L L I N G T H E S O A P T A N K Unscrew the soap tank from the pump assembly and remove from support. Fill the tank up to the top line. Insert the soap tank along with the tube back into the bottle support.
- Page 11 S E T T I N G A D J U S T M E N T S If necessary, use the (optional) RES-38 remote control to adjust the soap dispenser’s settings. To use the remote control, hold it straight in front of the sensor, at a distance of about 10-15 cm.
- Page 12 M A I N T E N A N C E CARE AND CLEANING OF CHROME AND SPECIAL FINISHES DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or the like. Use of any prohibited cleaning or maintenance products or substances could damage the surface of the soap dispenser.
- Page 13 B A T T E R Y R E P L A C E M E N T When the battery weakens, the blue indicator light will blink at a constant rate when user's hands are within the sensor range. The battery must be replaced within 2 weeks.
- Page 14 S P A R E P A R T S L I S T Screws and seals kit SMART/EXTREME/ELITE S07210088 Screws and seals kit AKWA/TOUCH FREE S07210143 Screws and seals kit ONE S07210184 Sensor kit SMART/EXTREME/ELITE S07220279 Sensor kit AKWA/TOUCH FREE...
-
Page 15: Troubleshooting
T R O U B L E S H O O T I N G PROBLEM INDICATOR CAUSE SOLUTION ILLUSTRATION Soap Continuous Connector not The connectors should be dispensing discharge fully inserted. inserted fully until the white from the o-ring is no longer visible. NOT CONNECTED PROPERLY spout. - Page 16 T R O U B L E S H O O T I N G PROBLEM INDICATOR CAUSE SOLUTION ILLUSTRATION Soap not The pump Connector not The connectors should be dispensing does not fully inserted. inserted fully until the white NOT CONNECTED PROPERLY emit a sound o-ring is no longer visible.
- Page 17 L I M I T E D W A R R A N T Y These soap dispensers are warranted for 2 years from the date of purchase. In the event of a defect during this period of regular use, SUPRATECH will, at its discretion, repair, provide a replacement part or product, or make appropriate adjustments.
- Page 18 N O T E S...
- Page 19 N O T E S...
- Page 20 2, rue des Cyprès - 37240 Bossée - France Tél : +33 (0)2 47 92 23 31 - info@autosanit.com www.autosanit.com 03.2025...
Need help?
Do you have a question about the SMART and is the answer not in the manual?
Questions and answers