Related Manuals for Outland Technology FMPPC2A
Summary of Contents for Outland Technology FMPPC2A
- Page 1 All manuals and user guides at all-guides.com Owner’s Manual Model number FMPPC2A Series number 890 D.890.000.V0 FMI BRANDS INC. 309-19133 26th Avenue | Surrey, B.C. Canada V3Z 3V7 | Toll Free 1-888-514-1663 | Fax 1-888-797-9931...
- Page 2 All manuals and user guides at all-guides.com Owner & Safety Manual Model number FMPPC2A, Series Number 890 - Tested by CSA International DANGER: If you smell gas: 1 Shut off gas to the appliance. 2 Extinguish any open flame. 3 If odour continues, keep away from the appliance and immediately call your gas supplier or fire department.
- Page 3 All manuals and user guides at all-guides.com Disconnected cylinders must have threaded valve plugs tightly WARNING: installed and must not be stored in a building, garage or any other enclosed area. Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read The gas pressure regulator provided with this appliance must be the installation, operating and maintenance instructions used, and must be the same model as supplied with the unit.
- Page 4 All manuals and user guides at all-guides.com Owner & Safety Manual All LP cylinders to be used with this appliance must be: WARNING: a. Constructed and marked in accordance with the specifications for LP-gas cylinders Standard, CAN/CSA Ensure that the LP gas cylinder is kept at a minimum B339, Cylinders, Spheres and Tubes for the Transportation of distance of three feet (36 inches) away from the appliance.
- Page 5 All manuals and user guides at all-guides.com LEAK TEST: Installation must conform with local codes or, in the absence of 1. DO NOT USE OR PERMIT SOURCES OF IGNITION local codes, with either the National Fuel Gas Code, ANSI Z223.1/ IN THE AREA WHILE DOING THE LEAK TEST.
-
Page 6: Note To User
All manuals and user guides at all-guides.com Owner & Safety Manual SECTION 1: ASSEMBLY NOTE TO USER: STEP 1 Enclosed are four bags of rocks, one factory installed 10' propane-rated hose with Before igniting the unit for the first attached regulator, one propane tank stabilizer ring, one lid and one carry strap. time, follow steps one through 5 in the below Ignition section. - Page 7 All manuals and user guides at all-guides.com SECTION 2: IGNITION CONTINUED STEP 3 STEP 4 Extend hose to full length and ensure that the propane tank is as Slowly * turn cylinder valve to the open position. far as safely possible from the Firebowl and place the tank in the included stabilizer ring.
- Page 8 All manuals and user guides at all-guides.com Owner & Safety Manual SECTION 4: EXTINGUISHING THE APPLIANCE STEP 1 STEP 2 STEP 3 Turn cylinder valve to the “Closed” position. Turn appliance valve to the “Off” position Allow unit to cool for at least five (5) by pushing and turning knob clockwise.
Need help?
Do you have a question about the FMPPC2A and is the answer not in the manual?
Questions and answers