Installation - Linksys WRV210 - Wireless-G VPN Router Quick Install Manual

Section 1: Installation
Connect the power
F.
adapter to the Router's
Power port, and then plug
the other end into an
electrical outlet.
The Power and Internet
G.
LEDs on the front panel
will light up green as soon
as the power adapter is
connected properly.
Power on the PCs.
H.
The hardware installation is now complete.
6
NOTE:
Use only the power adapter that is supplied with
the Router. Using a different power adapter could
damage the Router.
Wireless-G VPN Router with RangeBooster