Related Manuals for FASANO TOOLS FG 310/LT-B
Summary of Contents for FASANO TOOLS FG 310/LT-B
- Page 1 18.0V Li-ion BATTERY IMPACT WRENCH WITH 1/2" SQUARE DRIVE FG 310/LT-B FG 310/LT2 The reproduction of this document (even in partial form) is prohibited without the written Fasangas Srl authorization...
- Page 2 INDEX IMPORTANT WARNINGS GENERAL WARNINGS SAFETY: GENERAL RULES FOR ALL BATTERY-OPERATED TOOLS SAFETY: GENERAL RULES TECHNICAL FEATURES COMPONENT DESCRIPTION CLEANING AND MAINTENANCE DISPOSAL INFORMATION EC DECLARATION OF CONFORMITY WARRANTY This manual is the translation of the original version written in Italian language.
-
Page 3: General Warnings
1. IMPORTANT WARNINGS Before to use the tool, please read carefully the instruction contained in this manual. Improper or unsafe use of this tool can result in death or serious bodily injury. This manual of instructions constitutes an integral part of product and it has to be edited by the end user for every possible future consultation. - Page 4 3. SAFETY: GENERAL RULES FOR ALL BATTERY-OPERATED TOOLS When using the tool always follow these safety instructions to reduce the risk of personal injury: WORK AREA ▪ Keep the work area clean and well lit. Dark and dirty work areas could be the cause of accidents.
- Page 5 4. SAFETY: GENERAL RULES Before using the charger, read all instructions and cautionary warnings on the charger, the battery, and in this manual. Improper use of the battery and charger can cause serious injury. To avoid such injuries: 1. Never disassemble the battery. 2.
-
Page 6: Technical Features
5. TECHNICAL FEATURES IMPACT WRENCH Bare tool code (tool without battery pack): FG 310/LT-B Tool code (tool with battery pack): FG 310/LT2 Type of tool: impact battery wrench Weight (without battery pack): 1,67 kg Weight (with battery pack): 2,36 kg... - Page 7 6. COMPONENT DESCRIPTION REF. DESCRIPTION Switch to select the direction of rotation of the tool and to lock the start button Handle Usage mode setting panel Metal hook Hold-to-run start button 1/2" male square drive 7. USE WARNING Before using the tool, make sure you are familiar with all its features and that you are equipped with the appropriate safety devices.
- Page 8 NOTE • As soon as the tool shows a loss of power, stop and recharge the battery pack immediately. • If the battery pack has been unused for more than 3 months, recharge the battery pack before using it again. Recharge every 6 months. •...
- Page 9 STAUS LED indicators ICONS Ready for charging (battery pack not Red LED off and green LED on steady installed) Battery pack installed and charging started Red LED on steady and green LED off Battery pack installed charging The green LED is on steadily and the red completed LED is off Red LED and green LED flash...
- Page 10 2. Usage mode and LED light setting panel ATTENTION ALWAYS wait until the tool has come to a complete stop before changing the operating mode. Screw (clockwise rotation) Unscrew (counterclockwise rotation) Mode Mode Display on the Sequence Display on the panel Sequence (RPM) (RPM)
- Page 11 3. Starting of the tool ATTENTION Before use, make sure you have set the rotation direction and working mode required for the job you need to do. To start the tool, press the start button which is a hold-to-run button that allows you to adjust the rotation speed of the tool depending on the pressure applied to it: by increasing the pressure applied to it, the rotation speed of the tool increases;...
- Page 12 The right to the warranty lapses if the tool has been tampered with by personnel not authorized by Fasangas S.r.l. Products without the right to the warranty will be repaired at the customer's expense. FASANGAS S.R.L. Codes: FG 310/LT-B; FG 310/LT2 Viale Grecia, 3 Rev.0 01.2025 73100 Zona Industriale Lecce (LE) Phone: (+39) 0832362097 info@fasanotools.com;...
-
Page 13: Disposal Information
The right to the warranty lapses if the tool has been tampered with by personnel not authorized by Fasangas S.r.l. Products without the right to the warranty will be repaired at the customer's expense. FASANGAS S.R.L. Codes: FG 310/LT-B; FG 310/LT2 Viale Grecia, 3 Rev.0 01.2025 73100 Zona Industriale Lecce (LE) Phone: (+39) 0832362097 info@fasanotools.com;... -
Page 14: Cleaning And Maintenance
3. Starting of the tool ATTENTION Before use, make sure you have set the rotation direction and working mode required for the job you need to do. To start the tool, press the start button which is a hold-to-run button that allows you to adjust the rotation speed of the tool depending on the pressure applied to it: by increasing the pressure applied to it, the rotation speed of the tool increases;... - Page 15 2. Usage mode and LED light setting panel ATTENTION ALWAYS wait until the tool has come to a complete stop before changing the operating mode. Screw (clockwise rotation) Unscrew (counterclockwise rotation) Mode Mode Display on the Sequence Display on the panel Sequence (RPM) (RPM)
- Page 16 STAUS LED indicators ICONS Ready for charging (battery pack not Red LED off and green LED on steady installed) Battery pack installed and charging started Red LED on steady and green LED off Battery pack installed charging The green LED is on steadily and the red completed LED is off Red LED and green LED flash...
- Page 17 NOTE • As soon as the tool shows a loss of power, stop and recharge the battery pack immediately. • If the battery pack has been unused for more than 3 months, recharge the battery pack before using it again. Recharge every 6 months. •...
-
Page 18: Component Description
6. COMPONENT DESCRIPTION REF. DESCRIPTION Switch to select the direction of rotation of the tool and to lock the start button Handle Usage mode setting panel Metal hook Hold-to-run start button 1/2" male square drive 7. USE WARNING Before using the tool, make sure you are familiar with all its features and that you are equipped with the appropriate safety devices. - Page 19 5. TECHNICAL FEATURES IMPACT WRENCH Bare tool code (tool without battery pack): FG 310/LT-B Tool code (tool with battery pack): FG 310/LT2 Type of tool: impact battery wrench Weight (without battery pack): 1,67 kg Weight (with battery pack): 2,36 kg...
-
Page 20: Safety: General Rules
4. SAFETY: GENERAL RULES Before using the charger, read all instructions and cautionary warnings on the charger, the battery, and in this manual. Improper use of the battery and charger can cause serious injury. To avoid such injuries: 1. Never disassemble the battery. 2. - Page 21 3. SAFETY: GENERAL RULES FOR ALL BATTERY-OPERATED TOOLS When using the tool always follow these safety instructions to reduce the risk of personal injury: WORK AREA ▪ Keep the work area clean and well lit. Dark and dirty work areas could be the cause of accidents.
-
Page 22: Important Warnings
1. IMPORTANT WARNINGS Before to use the tool, please read carefully the instruction contained in this manual. Improper or unsafe use of this tool can result in death or serious bodily injury. This manual of instructions constitutes an integral part of product and it has to be edited by the end user for every possible future consultation. - Page 23 INDEX IMPORTANT WARNINGS GENERAL WARNINGS SAFETY: GENERAL RULES FOR ALL BATTERY-OPERATED TOOLS SAFETY: GENERAL RULES TECHNICAL FEATURES COMPONENT DESCRIPTION CLEANING AND MAINTENANCE DISPOSAL INFORMATION EC DECLARATION OF CONFORMITY WARRANTY This manual is the translation of the original version written in Italian language.
- Page 24 18.0V Li-ion BATTERY IMPACT WRENCH WITH 1/2" SQUARE DRIVE FG 310/LT-B FG 310/LT2 The reproduction of this document (even in partial form) is prohibited without the written Fasangas Srl authorization...
Need help?
Do you have a question about the FG 310/LT-B and is the answer not in the manual?
Questions and answers