Related Manuals for FASANO TOOLS FGA 292/B
Summary of Contents for FASANO TOOLS FGA 292/B
- Page 1 FGA 292/B SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL RATCHET WRENCH Rev.112017 The reproduction of this document (even in partial form) is prohibited without the Fasangas Srl authorization...
- Page 2 CATALOGUE GENERAL WARNINGS TECHNICAL SPECIFICATIONS IMPORTANT SAFETY INSTRUCTIONS FUNCTIONAL INSTRUCTIONS MAINTENANCE TROUBLESHOOTING DISPOSAL INFORMATIONS EC DECLARATION OF CONFORMITY WARRANTY...
- Page 3 Usage destination. This tool and its accessories, must only be used for the purpose for which they have been conceived. A unreasonable uses, as, for example, the un-observance of the safety instruction, the use of no original accessories and operation not authorized on the product. . TECHNICAL SPECIFICATIONS Model: FGA 292/B Type: Air Ratchet Wrench Weight: 2.8 lb (1.3 kg)
- Page 4 . IMPORTANT SAFETY INSTRUCTIONS When using this air tool, the following basic safety precautions should always be followed to reduce the risk to personal injury: Always wear safety glasses with side shields (DP I- Dir.89/686/EEC) - Air powered equipment are capable of propelling materials such as metal chips, saw dust and other debris at high speed, which could result in serious eye injury.
- Page 5 closed the tap supply compressed air coming from the supply - Remove air hose to lubricate or add attachments and accessories to the tool. - Never operate tool while under the influence of drugs or alcohol. ep proper footing and balance at all times. - Keep handles dry, clean and free from oil and grease.
- Page 6 WARNING Before to use the tool, always check the integrity of the tool and of its accessories. Before to start the tool, always check to have correctely set the accessory. 4. Turn air compressor on and allow air tank to fill. 90 PSI (6.2 bars).
- Page 7 5. MAINTENANCE WARNING ALWAYS DISCONNECT AIR SUPPLY BEFORE LUBRICATING, INSTALLING, REMOVING OR ADJUSTING THE TOOL. LUBRICATION Air tools require regular lubrication throughout the life of the tool. The air motor and bearing use compressed air to power the tool. Because moisture in compressed air will rust the air motor, you must lubricate the motor daily. An inline oiler is recommended.
- Page 8 . DISPOSAL INFORMATIONS When the tool is not usable and not repairable, dispose it according to regulations of the place in order to safeguard the environment. 8. EC DECLARATION OF CONFORMITY This product complies with the dispositions of the following European Directives and Harmonized Standards: EN ISO 12100 :2010 2006/42/CE EN ISO 11148-6 :2013...
Need help?
Do you have a question about the FGA 292/B and is the answer not in the manual?
Questions and answers