Wireless Guest Networks - NETGEAR DGND3300 - RangeMax Dual Band Wireless-N DSL Gateway Wireless Router User Manual

Dual band wireless-n modem router
Hide thumbs Also See for DGND3300 - RangeMax Dual Band Wireless-N DSL Gateway Wireless Router:
Table of Contents

Advertisement

WPS Settings. These are Push 'N' connect settings used by the modem router when WPS
clients are added.
Router's PIN. The number that the modem router broadcasts when adding a WPS client
with the PIN method.
Disable Router PIN. Selecting this checkbox disables the modem router's PIN.
Keep Existing Wireless Settings. This checkbox is cleared by default so that the modem
router network name (SSID) and security can be set automatically if Push 'N' Connect
(WPS) is used to set up the network. When the first WPS client is added, this checkbox is
automatically selected so that the SSID and security remain the same when additional
clients are added.
For information about adding WPS clients, see
Your Wireless Network" on page
Restricting access by MAC address. You can use a Wireless Card Access List to restrict
access. See
"Restricting Access by MAC Address" on page

Wireless Guest Networks

A wireless guest network allows you to provide guests access to your wireless network without
prior authorization of each individual guest. You can configure wireless guest networks and
specify the security options for each wireless guest network.
The Guest Network Settings screen that you see depends on the setting in the Wireless Mode field
on the Wireless Settings screen and on which selection you make from the main menu. The Guest
Network selection is grayed out if it is not available. The following table shows wireless modes,
menu selections, and guest networks.
Table 2-2. Wireless Modes and Guest Networks
Mode in Wireless Settings
Screen
Up to 270Mbps at 5GHz &
54Mbps at 2.4GH
(factory default setting)
Up to 270Mpbs
Safeguarding Your Network
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
2-10.
Menu Selection
Guest Network a/n
Guest Network b/g
Guest Network b/g/n NETGEAR-2.4G_n_Guest1
v1.0, September 2009
"Using Push 'N' Connect (WPS) to Configure
3-2.
Guest Network Default SSID
NETGEAR-5G_a_n_Guest1
NETGEAR-2.4G_g_Guest1
Wireless
Compatibility
• 5GHz 802.11a
• 5GHz 802.11n
• 2.4GHz 802.11g
• 2.4GHz 802.11b
• 2.4GHz 802.11n
• 2.4GHz 802.11g
• 2.4GHz 802.11b
2-17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents