OJ Electronics OJ-DV Hterm Instructions Manual
OJ Electronics OJ-DV Hterm Instructions Manual

OJ Electronics OJ-DV Hterm Instructions Manual

Advertisement

INSTRUCTIONS
OJ-DV Hterm
OJ Drives
©
A DRIVES PROGRAMME DEDICATED TO VENTILATION SOLUTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OJ-DV Hterm and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for OJ Electronics OJ-DV Hterm

  • Page 1 INSTRUCTIONS OJ-DV Hterm OJ Drives © A DRIVES PROGRAMME DEDICATED TO VENTILATION SOLUTIONS...
  • Page 2: Product Programme

    INSTRUCTIONS OJ-DV Hterm INTRODUCTION OJ-DV Hterm is a hand terminal for setting up and operating an OJ-DV. The hand terminal can be used to adapt OJ-DV operating parameters to the application concerned. It can also be used to read out current alarms.
  • Page 3 The DV-Hterm only uses the default setting with Modbus address 55. FUNCTIONS OJ-DV Hterm features an eight-line display, a navigation selector button and two LEDs. Scroll upwards or downwards through the menus by turning the selector button and select an option by pressing the button.
  • Page 4 With OJ-DV Hterm set to “Hterm” in the “Start/Stop” / “Control” menu, the required setpoint for EC can be set in %. With OJ-DV Hterm set to “0-10 V DC” in the “Start/ Stop” / “Control” menu, the actual setpoint is dis- played in %.
  • Page 5 Setting and displaying baud rate 9600, 19200, 38400, 115200 bps Parity Setting and displaying parity None Even Stop bits Setting and displaying stop bits Timeout Communication timeout 0 - 200 s Exit Return to main menu © 2018 OJ Electronics A/S...
  • Page 6 Displays version of the fan configuration version User Cfg var Displays user data variant User Cfg ver Displays version of the user data version Hterm SW ver. Displays OJ-DV Hterm software version Exit Return to main menu Config Drive configuration Enter PIN code for access...
  • Page 7: Technical Data

    Weight ........150 g LED INDICATION The hand terminal has two built-in LEDs (fig. 5), which indicate the following: Flashing Red LED Alarm active Green LED: Override with hand terminal © 2018 OJ Electronics A/S...
  • Page 8: Troubleshooting

    OJ Electronics A/S Stenager 13B • DK-6400 Sønderborg Tel. : +45 73 12 13 14 • Fax +45 73 12 13 13 oj@ojelectronics.com • www.ojelectronics.com The trademark is a registered trademark belonging to OJ Electronics A/S · © 2018 OJ Electronics A/S...

Table of Contents