Grundig HS 7880 Manual

OVERVIEW

Read the following user notes carefully to ensure you can enjoy your quality product from Grundig for many years to come.

A responsible approach!

GRUNDIG focuses on contractually agreed social working conditions with fair wages for both internal employees and suppliers, as well as on the efficient use of raw materials with continual waste reduction of several tonnes of plastic each year – and availability of at least 5 years for all accessories.
For a future worth living.
Grundig.

Controls

1. Styling attachment, large ø 50 mm
2. Catch for releasing the attachment
3. Switch for temperature settings (cold setting, two temperature settings)
4. Switch for switching the appliance on and off and selecting the two speed settings
5. Air inlet grille
6. Cable with swivel joint and hanging loope
7. Handle

Accessories

1. Styling attachment, small ø 25 mm, with retractable brushes
2. Styling attachment, medium ø 38 mm
3. Styling nozzle

Settings
Your appliance has the following setting options:

Speed level

• 0: Off
• 1: Gentle air flow
• 2: Stronger airflow

Cold setting and temperature setting

• : Interrupts the hot air supply with cool air for setting the style of the hair
• 1: Moderate temperature for gently drying and styling
• 2: High temperature for fast drying

The separate temperature and speed settings allow you to control the temperature individually according to your hair type (fine, straight, curly or thick).

Changing the styling attachments

1. Remove the attached styling attachment by pressing catch and twisting the attachment to the right slightly.
   
2. Place the required styling attachment over the catch in line with the recess, press catch B and let the styling attachment latch into place.

Notes:

• The diameter of the styling attachment determines the size of the curls.
• The styling attachment with ø 25 mm is suitable for smaller curls and waves. The retractable bristles make it easy to remove from your hair and ensure long-lasting styling results. To retract the bristles, turn the knob at the top on the styling attachment.
  
• The ø 38 mm styling attachment is suitable for softly cascading hair styles or medium curls and waves.
• By using the ø 50 mm styling attachment, you can create an especially large volume for long hair, as well as large curls and waves.

Using as a hairstyler
Check if the mains voltage on the type plate (on the handle of the device) corresponds to your local mains supply.

1. Towel dry your hair thoroughly after washing.
2. Plug the power cord into the wall socket.
   • The 3 metre salon length of the power cord ensures freedom of movement when styling.
3. Turn on the appliance with switch and set the speed level.
4. Set the temperature level with switch .
5. If required, you can interrupt the hot air supply when drying by turning switch to »« (cold setting).
   Note
   • The cold setting interrupts the hot setting with a flow of cool air. This allows you to fix your hairstyle better and more lastingly.
6. After use, switch off the appliance with the Using as a hairdryer switch and pull out power cord from the When using as a hair dryer, attach the small wall socket. concentrator nozzle 3.

• Never wind the power cord around the appli-ance, as this can result in damage. Check the power cord and the appliance regularly for visible damage.

Using as a hairdryer
When using as a hair dryer, attach the small concentrator nozzle .

INFORMATION

Cleaning and care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft dry cloth for cleaning the housing. Remember to clean the air inlet grille E occasionally with a soft brush to remove any hair and dust.

Technical data
Power supply: 220–24 V~, 50 Hz II
Power: 1200 W
Technical and design modifications reserved.