Advertisement
Quick Links
SylvanSport GO Camper and Gear Winterization Recommendations
For Indoor Storage
● Follow recommendations in the GO Camper Maintenance Guide (found below).
● Before putting your GO tent away, make sure it is completely dry.
● Clean your kitchen counter with a gentle soap and dry completely before storing.
● Best practice for your tires is to take your GO for a monthly spin, weather permitting.
● Best practice for sleeping pads and mattresses is to store them inflated with valves open.
● Best practice for sleeping bags is to store them uncompressed, in a mesh or cloth laundry bag.
For Outdoor Storage
● Follow recommendations in the GO Camper Maintenance Guide (found below).
● If not completed previously for VINs 0001-3174, follow the GO Side Tube Vent Instructions (found below).
● Before putting your GO tent away, make sure it is completely dry.
● Cover your GO. Recommended: Coolest. Camper. Cover.
○ Helpful hint...use a basketball in the center of cross bars, under the cover, to help move rain and snow.
● Clean your kitchen counter with a gentle soap and dry completely before storing.
● If parking your GO on soft ground, we recommend utilizing wheel blocks to prevent tire rot.
● Best practice for your tires is to take your GO for a monthly spin, weather permitting.
● Best practice for sleeping pads and mattresses is to store them inflated with valves open.
● Best practice for sleeping bags is to store them uncompressed, in a mesh or cloth laundry bag.
SylvanSport GO Camper Maintenance Guide
Trailer Cleaning
as needed
● Trailer can be cleaned using a high pressure sprayer at a car wash or a soft sponge/rag and mild detergent.
● Do not use abrasive cleaners or hard scrubbing sponges or brushes.
● For stubborn spots: non-abrasive, orange degreasing cleaner works well.
Tent Cleaning
as needed
● Recommended: Nikwax GO Tent Maintenance Kit
● Alternative: Tent can be cleaned with a mild detergent and a soft sponge.
Wheel Maintenance
Lug Nuts
● Ensure lug nuts are properly tightened using a ¾" tire iron or ¾" deep socket wrench.
● Tightening should be done in stages going around the bolt circle in a standard crossing pattern.
before each use
https://www.sylvansport.com/shop/go-coolest-camper-cover/
https://www.sylvansport.com/shop/nikwax-solarwash-solarproof-kit/
Advertisement
Related Manuals for sylvansport GO Camper
Summary of Contents for sylvansport GO Camper
- Page 1 SylvanSport GO Camper and Gear Winterization Recommendations For Indoor Storage ● Follow recommendations in the GO Camper Maintenance Guide (found below). ● Before putting your GO tent away, make sure it is completely dry. ● Clean your kitchen counter with a gentle soap and dry completely before storing.
- Page 2 Hubs 12,000 miles or 12 months ● Lubricate the hubs to increase the life of the bearings, tires, and for safety. ● Recommended: SylvanSport GO Maintenance Kit https://www.sylvansport.com/shop/sylvansport-go-go-easy-maintenance-kit/ ● Remove rubber cap at center of hub. ● Attach standard automotive grease gun with multi-purpose No.2 grade lubricant to zerk fitting.
- Page 3 Lift System: Telescoping Tubes ● Using a silicone lubricant or “dry lube” apply a light coating to the 4 telescoping lift tubes and wipe off any excess with a dry, clean rag. ● Do NOT use oil-based lubricants (i.e. regular WD-40). Lift System: Cable ●...
- Page 4 Storage Box ● Locate the (6) 5/16” screws on the inside bottom of the storage box and the (3) 10mm screws for the latch support bracket. ● Ensure that they are all snug. Do not overtighten. Frame ● Locate the bolted connections at the frame junctions on the underside of the GO frame. ●...
- Page 5 SylvanSport GO Camper Side Tube Vent Instructions (for VINs 0001-3174) (to prevent water from accumulating in side tubes)
Need help?
Do you have a question about the GO Camper and is the answer not in the manual?
Questions and answers