Advertisement
Quick Links
Making British gardens great
SLEEPER PEW BENCH
INSTRUCTIONS
We recommend using the following
tools (not supplied):
Pozidrive
Drill &
Screwdriver
2-3mm Drill
Bits
PLEASE KEEP PLASTIC BAGS AND SMALL PARTS
AWAY FROM CHILDREN
IMPORTANT
Assembly requires 2+
adults.
1
Position two Half Legs so that they are flush to each
other. Place the Top and Bottom Connecting Batten so
the cut outs line up with the Half Legs. Secure using
4x40mm screws for each Connecting Batten.
Missing something or need more information?
Call our aftersales team on
0333 321 3142
Forest Garden, Oak Drive, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
EU Authorised Representative: Authorised Representative Service, 77 Camden Street Lower Dublin, D02 XE80, Ireland
Rubber
Mallet
40
MM
SCREWS
FIXING PACK CONTAINS:
FIXING PACK CODE: SPBENCHFP
CHECK AND TIGHTEN ALL THE FIXINGS APPLIED
TO THIS PRODUCT ON A REGULAR BASIS.
REMINDER
REMINDER
Always pre-drill before
Always pre-drill before
screwing.
screwing.
2
Position the Top Notched Batten onto the Seat. Place
the Top Notched Batten so it sits in the middle of the
Seat with the Batten flush to each end of the Seat,
secure using 6x90mm screws.
Visit our website for spare instructions and
more information
www.forestgarden.co.uk
ISSUE: 0124
90
MM
SCREWS
Advertisement
Related Manuals for Forest SLEEPER PEW BENCH
Summary of Contents for Forest SLEEPER PEW BENCH
- Page 1 Visit our website for spare instructions and Call our aftersales team on more information 0333 321 3142 www.forestgarden.co.uk Forest Garden, Oak Drive, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB EU Authorised Representative: Authorised Representative Service, 77 Camden Street Lower Dublin, D02 XE80, Ireland...
- Page 2 SCREWS Position the Bench Assembly and Leg Assembly with Position the Stopper Batten through the Top Notched the Leg Assembles Connecting Battens facing inwards. Batten. Ensure it is flush to either side of the Seat. Secure Ensure the Seat Assembly sits flush into the Leg Assembly using 4x40mm screws for both ends.
- Page 3 CHECK YOU HAVE ALL YOUR PARTS PRIOR TO ASSEMBLY. (The parts do not have codes on them. They are listed below should you need to order one.) Timber is a natural material of which will shrink and swell as a result of varying moisture content. Assembly of damaged parts may be deemed to be acceptance and this may affect the remedies you are entitled to.
Need help?
Do you have a question about the SLEEPER PEW BENCH and is the answer not in the manual?
Questions and answers