Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AL-KO E&P HYDRAULICS LevelM Pro
Summary of Contents for AL-KO E&P HYDRAULICS LevelM Pro
- Page 1 DISPLAY UPDATE MANUAL LevelM Pro LevelM Pro display update manual...
- Page 2 DISPLAY UPDATE MANUAL LevelM Pro Please check if a update is needed fi rst. To do this follow the blue directions below: In the fi rst information screen you see the software version of the screen (display). The newest screen version that is in the SD_LevelM_Pro Display_V2_0.zip fi...
- Page 3 DISPLAY UPDATE MANUAL LevelM Pro In the second information screen you see the controller (pump) software version. The newest controller software that comes with the SD_LevelM_Pro Display_V2_0.zip fi le is 2.3 So if the software version in this screen shows 2.3 an update is not needed, you have already the newest screen software.
- Page 4 DISPLAY UPDATE MANUAL LevelM Pro W A R N I N G To complete an update on the LevelM Pro system a certain amount of computer knowledge is needed. If you are not very familiar with computers and digital technology, please fi nd the right person to help you. Doing the update wrong can result in a not working display or level system and costs need to be made to get the system working again if it fails !!! Follow the next steps very carefully to update a LevelM Pro display:...
- Page 5 DISPLAY UPDATE MANUAL LevelM Pro confi rm the folder to extract in and push extract a new folder is made and can be opened Open the new folder and see the subfolders Connect the PC to the Display with a USB-C cable and switch the display on. If everything works you will see USB on the display and in the explorer on the PC you see a new USB drive.
- Page 6 DISPLAY UPDATE MANUAL LevelM Pro Delete all fi les and folders from the Display (USB drive) Copy all the folders from the update in 6 on the display. Push the “Call Bootloader” button on the display Only one fi le shows, push “Install” LevelM Pro display update manual...
- Page 7 DISPLAY UPDATE MANUAL LevelM Pro Disconnect the USB cable from the display Only one fi le shows, push “Install” Push Restart Check that the required and new recourse versions are the same and if so press “Update Resources” The display should now restart with the new software installed.
Need help?
Do you have a question about the E&P HYDRAULICS LevelM Pro and is the answer not in the manual?
Questions and answers