1. Manuals
  2. Brands
  3. AJAX Manuals
  4. Transmitter
  5. 56211.18.NC1
  6. User manual

AJAX 56211.18.NC1 User Manual

Hide thumbs

Advertisement

Table of Contents

Transmitter User manual
Updated February 19, 2024
Transmitter is a module for connecting third-party detectors to Ajax security
system. It transmits alarms and noti es when the tamper of the third-party
detector triggers. The module is equipped with its own accelerometer, which
protects it from dismounting. It runs on batteries and can supply power to the
connected detector.
Transmitter operates within the Ajax security system, by connecting via the
protected
Jeweller
protocol to the
hub
. It is not intended to use the device in third-
party systems.
Not compatible with the
uartBridge
or
ocBridge Plus

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 56211.18.NC1 and is the answer not in the manual?

Questions and answers

Related Manuals for AJAX 56211.18.NC1

Summary of Contents for AJAX 56211.18.NC1

  • Page 1 Transmitter User manual Updated February 19, 2024 Transmitter is a module for connecting third-party detectors to Ajax security system. It transmits alarms and noti es when the tamper of the third-party detector triggers. The module is equipped with its own accelerometer, which protects it from dismounting.

  • Page 2: Functional Elements

    5. Terminals for detector power supply, alarm, and tamper signals. Operation procedure Transmitter is designed to connect third-party wired sensors and devices to the Ajax security system. The integration module receives information about alarms and tamper activation through the wires connected to the clamps.
  • Page 3 The KeyArm feature is supported by all hubs (except Hub model) with OS Malevich 2.17 and higher. How to set up KeyArm Zone for Ajax systems The type of alarm is indicated in the settings of Transmitter. The text of...
  • Page 4 Alarm when re detectors Fire trigger. Alarm when pressing auxiliary Auxiliary alarm request button. Alarm when pressing the panic Panic button button. Alarm when gas concentration Gas alarm is exceeded. Malfunction Noti cation of the connected device malfunction. Transmitter should be connected to Hub Plus, Hub 2 (2G), Hub 2 (4G),...
  • Page 5 rmware version and higher. Alarm when water leakage Leakage detectors trigger. Alarm when the glass break sensor is triggered. Glass break This event type operates only in Pulse operating mode. Alarm when the upper High temperature temperature limit is exceeded. Alarm when the lower Low temperature temperature limit is exceeded.
  • Page 6 Alarm when the system is disarmed using the duress code. Duress code (opening) This event type operates only in Pulse operating mode. Alarm when the seismic sensor is triggered. Vibration (seismic sensor) This event type operates only in Pulse operating mode. The type of event that is con gured by the user.
  • Page 7 Only users with administrative privileges can add the device to the hub How to connect Transmitter to the hub: 1. Select the Add Device option in the Ajax application. 2. Name the device, scan or enter manually the QR code (located on the body and packaging), and select the location room.
  • Page 8 Request for connection to the hub is transmitted for a short time at the time of switching on the device. If the connection to the Ajax hub failed, Transmitter will switch off after 6 seconds. You may repeat the connection attempt then.
  • Page 9 Battery level of the device. Displayed as a percentage. Battery Charge How battery charge is displayed in Ajax apps Device tamper zone status. Displays the status of the connected detector alarm zone. Two statuses are available: External sensor state OK —...
  • Page 10 (speci ed in the settings for Devices Auto Deactivation). The feature is con gured in the Ajax PRO app. By timer — the device is automatically disabled by the system when the recovery timer expires (speci ed in the settings for Devices Auto Deactivation).
  • Page 11 Entry/Exit — when a delay is set, the armed device starts the countdown and doesn’t raise the alarm even if triggered until the countdown ends. Follower — the detector inherits the delays from Entry/Exit detectors. However, when the Follower is triggered individually, it immediately raises the alarm.
  • Page 12 Settings To change the Transmitter settings in the Ajax app: 1. Go to the Devices tab. 2. Select Transmitter from the list. 3. Go to Settings by clicking on the 4. Set the required parameters. 5. Click Back to save the new settings.
  • Page 13 Always Disabled — Transmitter does not use energy to power a third-party detector. Signals from the ALARM terminal are processed in both pulse and bistable modes. If the Always Active mode is enabled, the third- party detector power supply is on in the Always Active or Disabled if not Armed modes only, regardless of the security system status.
  • Page 14 setting: selecting arming Preset Action. selecting Security Objects to be controlled by KeyArm. con guring the Lock arm switch if lid is open feature. con guring the Notify of attempts to use arm switch when it’s locked feature (available for hubs with OS Malevich 2.19 or higher when the Lock arm switch if lid is open feature is enabled).
  • Page 15 sirens If enabled, the added to the system are Alert with a siren if accelerometer triggered triggered if device movement is detected. Opens the settings of Chime. How to set Chime Chime Settings What is Chime Alarm Reaction Specify how this device will react to alarms: Instant Alarm —...
  • Page 16 Switches Transmitter to the signal fade test mode (available in device with rmware version 3.50 and later). Signal Attenuation Test Learn more Opens the Transmitter User Manual in the Ajax User Guide app. Permanent Deactivation Three options are available: No — the device operates normally and transmits all events.
  • Page 17 The system can also automatically deactivate devices when the set number of alarms is exceeded or when the recovery timer expires. Learn more about auto deactivation of devices Allows the user to disable events of the device until the rst event of disarming the system. Three options are available: No —...
  • Page 18 4. Go to the Chime Settings menu. 5. Select siren noti cation for the event If external contact is open. 6. Select the chime sound: 1 to 4 beeps. Once selected, the Ajax app will play the sound. 7. Click Back to save the settings.

  • Page 19: Performance Testing

    Batteries are discharged detector or tamper is activated. Performance testing The Ajax system allows conducting tests for checking the functionality of connected devices. The tests do not start straight away, but within a period of 36 seconds when using the standard settings. The test time start depends on the settings of the detector scanning period (the paragraph on Jeweller settings in hub settings).
  • Page 20 If the signal level is one division, we cannot guarantee stable operation of the security system. Take possible measures to improve the quality of the signal. At least, move the device with an integration module — even a 20 cm shift can signi cantly improve the signal strength.

  • Page 21: Maintenance And Battery Replacement

    Closer than 1 meter to a hub. Maintenance and Battery Replacement The device does not require maintenance when mounted in the housing of a wired sensor. How long Ajax devices operate on batteries, and what affects this Battery Replacement Tech Specs Connecting a detector...

  • Page 22: Complete Set

    Radio frequency band 905.0 – 926.5 MHz 915.85 – 926.5 MHz 921.0 – 922.0 MHz Depends on the sales region. hubs radio Operates only with all Ajax , and Compatibility signal range extenders Maximum effective radiated power Up to 20 mW Modulation...

  • Page 23: Warranty

    Warranty Warranty for the Limited Liability Company “Ajax Systems Manufacturing” products is valid for 2 years after the purchase and does not apply to the pre-installed battery. If the device does not work correctly, you should rst contact the support service —...

Table of Contents