Table of Contents
Advertisement
Quick Links
Transmitter User Manual
Posted on July 1, 2021
Transmitter is a module for connecting third-party detectors to Ajax security
system. It transmits alarms and warns about the activation of the external detector
tamper and it is equipped with own accelerometer, which protects it from
dismounting. It runs on batteries and can supply power to the connected detector.
Transmitter operates within the Ajax security system, by connecting via the
protected
Jeweller
protocol to the
hub
. It is not intended to use the device in third-
party systems.
Not compatible with the
uartBridge
or
ocBridge Plus
The communication range can be up to 1,600 meters provided that there are no
obstacles and the case is removed.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AJAX 10306
Summary of Contents for AJAX 10306
- Page 1 Transmitter User Manual Posted on July 1, 2021 Transmitter is a module for connecting third-party detectors to Ajax security system. It transmits alarms and warns about the activation of the external detector tamper and it is equipped with own accelerometer, which protects it from dismounting.
-
Page 2: Functional Elements
Operation procedure Transmitter is designed to connect third-party wired sensors and devices to the Ajax security system. The integration module receives information about alarms and tamper activation through the wires connected to the clamps. Transmitter can be used to connect panic and medical buttons, indoor and outdoor... - Page 3 others wired detectors. The type of alarm is indicated in the settings of the Transmitter. The text of noti�cations about alarms and events of the connected device, as well as event codes transmitted to the central monitoring panel of the security company (CMS) depend on the selected type.
- Page 4 Only users with administrative privileges can add the device to the hub How to connect the Transmitter to the hub: 1. Select the Add Device option in the Ajax application. 2. Name the device, scan/write manually the QR Code (located on the body and...
- Page 5 Request for connection to the hub is transmitted for a short time at the time of switching on the device. If the connection to the Ajax hub failed, the Transmitter will switch off after 6 seconds. You may repeat the connection attempt then.
- Page 6 (speci�ed in the settings for Devices Auto Deactivation). The feature is con�gured in the Ajax PRO app. By timer — the device is automatically disabled by the system when the recovery...
- Page 7 Device ID Device identi�er Settings 1. Devices 2. Transmitter 3. Settings Setting Value First �eld Device name, can be edited Selecting the virtual room to which the device is Room assigned Selection of the external detector normal status: Normally closed (NC) External Detector Contact Status Normally opened (NO) Selection of the external detector type:...
- Page 8 The text of SMS and noti�cations in events feed, as well as the code transmitted to the security company’s console, depends on the selected type of alarms When the mode is active, the Transmitter Always Active transmits alarms even when the system is disarmed Delay When Entering, sec Selecting delay time when entering...
- Page 9 Learn more about device temporary Temporary deactivation deactivation The system can also automatically deactivate devices when the set number of alarms is exceeded or when the recovery timer expires. Learn more about auto deactivation of devices Disconnects the device from the hub and deletes Unpair Device its settings Set the following parameters in the Transmitter settings:...
-
Page 10: Performance Testing
Batteries are discharged detector or tamper is activated. Performance testing The Ajax security system allows conducting tests for checking the functionality of connected devices. The tests do not start straight away but within a period of 36 seconds when using the standard settings. - Page 11 Check the signal strength level at the installation location If the signal level is one division, we cannot guarantee stable operation of the security system. Take possible measures to improve the quality of the signal! As a minimum, move the device — even 20 cm shift can signi�cantly improve the quality of reception.
-
Page 12: Maintenance And Battery Replacement
Closer than 1 meter to a hub. Maintenance and Battery Replacement The device does not require maintenance when mounted in the housing of a wired sensor. How long Ajax devices operate on batteries, and what affects this Battery Replacement... -
Page 13: Complete Set
Protection from dismounting Accelerometer 868.0–868.6 MHz or 868.7 – 869.2 MHz, depends Frequency band on sales region hubs range Operates only with all Ajax , and Compatibility extenders Maximum RF output power Up to 20 mW Modulation GFSK Communication range... - Page 14 The full text of the warranty User Agreement Technical support: support@ajax.systems...
Need help?
Do you have a question about the 10306 and is the answer not in the manual?
Questions and answers